Get Display screen, heater and air conditioner, and audio system -> Heater and air conditioner Guide for Nissan X Trail SUV 2020

HEATER AND AIR CONDITIONER

For models with Stop/Start System or Idling

Stop System:

WARNING:

While the engine is stopped by the Stop/Start

System or the Idling Stop System, switching the

airflow to the front defogger will cause the

engine to automatically restart.

While the engine is running, selecting airflow to

the front defogger will prevent the Stop/Start

System or Idling Stop System from automati-

cally stopping the engine.

When the engine is stopped by the Stop/Start

System or Idling Stop System, heater and air

conditioner performance may be reduced. To

keep full heater and air conditioner perfor-

mance, restart the engine by pushing the Stop/

Start OFF switch or the Idling Stop System OFF

switch, or by placing the ignition switch in the

“ON” position. For more details see “Stop/Start

System or Idling Stop System” (P.5-24).

.

The heater and air conditioner operate

only when the engine is running.

Never leave children or adults who would

normally require the support of others

alone in the vehicle. Pets should not be

left alone either. They could unknowingly

activate switches or controls and inad-

vertently become involved in a serious

accident and injure themselves. On hot,

JVH0728X

sunny days, temperatures in

a closed

vehicle could quickly become high en-

ough to cause severe or possibly fatal

injuries to people or animals.

When the engine coolant temperature and

outside air temperature are low, the air flow

from the foot outlets may not operate. How-

ever, this is not a malfunction. After the coolant

temperature warms up, the air flow from the

foot outlets will operate normally.

.

Do not use the recirculation mode for

long periods as it may cause the interior

air to become stale and the windows to

fog up.

Do not adjust the heating and air con-

ditioning controls while driving so that

full attention may be given to vehicle

operation.

The sensors

and , located on the instru-

ment panel, help maintain a constant tempera-

ture. Do not put anything on or around the

sensors.

OPERATING TIPS (for automatic air

conditioner)

The heater and air conditioner operate when

the engine is running. The air blower will

operate even if the engine is turned off and

the ignition switch is placed in the “ON” posi-

tion.

NOTE:

.

Odors from inside and outside the vehicle

can build up in the air conditioner unit.

Odor can enter the passenger compart-

ment through the vents.

When parking, set the heater and air

conditioner controls to turn off air recir-

culation to allow fresh air into the pas-

senger compartment. This should help

reduce odors inside the vehicle.

JVH0727X

.

Display screen, heater and air conditioner, and audio system 4-29

Air flow control:

MANUAL AIR CONDITIONER AND HEATER (Type A)

Push one of the air flow control buttons to

select the air flow outlets.

—

Air flows mainly from center and side

ventilators.

Air flows mainly from center and side

ventilators and foot outlets.

Air flows mainly from the foot outlet

and partly from the defogger.

Air flows mainly from the defogger

and foot outlets.

JVH0664X

Air intake control:

The air intake control mode will change each

1.

2.

3.

“A/C” button/Fan speed control “

Air flow control buttons

” dial

Fan speed control:

time the air recirculation

pushed.

“

” button is

Turn the fan speed control “

” dial clockwise

” dial counter-

to increase the fan speed.

“MAX A/C” button/Temperature control

.

When the indicator light is turned on, the air

dial

Turn the fan speed control “

recirculates inside the vehicle.

4.

5.

Front defogger “

” button

clockwise to decrease the fan speed.

.

When the indicator light is turned off, the air

flow is drawn from outside the vehicle.

Rear defogger “

” button (See “Defog-

Temperature control:

ger switch” (P.2-64).)

Turn the temperature control dial to set the

desired temperature. Turn the dial between the

middle and the right position to select the hot

temperature. Turn the dial between the middle

and the left position to select the cool tem-

perature.

A/C (Air Conditioner) operation:

6.

Air recirculation “

” button

Push the “A/C” button to turn on or off the air

conditioner. When the air conditioner is on, the

“A/C” indicator light on the button illuminates.

For models with Stop/Start System or Idling

Stop System:

The Stop/Start System or Idling Stop System

will not activate when the front defogger is

turned on.

MAX A/C (Quick Air Conditioning) operation:

Push the “MAX A/C” button for quick cooling

and dehumidifying.

Controls

Turning system on/off:

When the MAX A/C mode is turned on, the air

flow mode indicator will turn off with the air

flow mode fixed at “

”.

To turn on the system, turn the fan speed

At the same time, the indicator light on the

“A/C” button and the air recirculation mode will

turn on.

control “

” dial out of the OFF position. Turn

the dial counterclockwise to the OFF position

to turn off the system.

Push the “MAX A/C” button again to turn off the

MAX A/C mode. When the MAX A/C mode is

turned off, most of the settings will return to

4-30 Display screen, heater and air conditioner, and audio system

the previous state, while the indicator light on

the “A/C” button will stay on.

3. Push the front defogger “

indicator light will turn on.)

” button. (The

3. Turn the fan speed control “

desired position.

” dial to the

4. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

4. Push the “A/C” button. (The indicator light

Heater operation

Heating:

will turn on.)

5. Turn the temperature control dial to the

desired position between the middle and

the cool (left) position.

A visible mist may be seen coming from the

ventilators in hot, humid conditions as the air is

cooled rapidly. This does not indicate a mal-

function.

This mode is used to direct heated air from the

To remove frost from the windshield

quickly, turn the temperature control dial

to the maximum hot (right) position and

foot outlets.

1. Push the air recirculation “

” button for

the fan speed control

maximum position.

“

” dial to the

normal heating. (The indicator light will turn

off.)

Heating and defogging:

2. Push the “

will turn on.)

” button. (The indicator light

This mode heats the interior and defogs the

Dehumidified heating:

windows.

3. Turn the fan speed control “

” dial to the

This mode is used to heat and dehumidify the

desired position.

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

air.

4. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

2. Push the “

” button. (The indicator light

will turn on.)

2. Push the “

” button. (The indicator light

3. Turn the fan speed control “

desired position.

” dial to the

will turn on.)

Ventilation:

This mode directs outside air from the side and

3. Turn the fan speed control “

desired position.

” dial to the

center ventilators.

4. Turn the temperature control dial to the

maximum hot (right) position.

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

4. Push the “A/C” button. (The indicator light

will turn on.)

Air conditioner operation

2. Push the “

” button. (The indicator light

5. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

The air conditioner system should be operated

for approximately 10 minutes at least once a

month. This helps prevent damage to the air

conditioner system due to the lack of lubrica-

tion.

will turn on.)

3. Turn the fan speed control “

desired position.

” dial to the

Dehumidified defogging:

4. Turn the temperature control dial to the

This mode is used to defog the windows and

desired position.

dehumidify the air.

Cooling:

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

Defrosting or defogging:

This mode is used to cool and dehumidify the

air.

This mode directs the air to the defogger

outlets to defrost/defog the windows.

2. Push the front defogger “

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

indicator light on the front defogger “

button will turn on.)

”

1. Turn the fan speed control “

desired position.

” dial to the

2. Push the “

” button. (The indicator light

3. Turn the fan speed control “

” dial to the

will turn on.)

2. Push the air recirculation “

” button. (The

desired position.

indicator light will turn off.)

Display screen, heater and air conditioner, and audio system 4-31

4. Turn the temperature control dial to the

desired position.

MANUAL AIR CONDITIONER AND HEATER (Type B)

JVH0827X

1.

Fan speed control “

Front defogger “

“A/C” button

” dial

MAX” button

Fan speed control:

2.

3.

4.

5.

Turn the fan speed control “

” dial clockwise

” dial counter-

to increase the fan speed.

Air recirculation “

” button

Turn the fan speed control “

clockwise to decrease the fan speed.

Rear window defogger “

” button (See

“Defogger switch” (P.2-64).)

Temperature control:

6.

7.

Temperature control dial

Air flow control buttons

Turn the temperature control dial to set the

desired temperature. Turn the dial between the

middle and the right position to select the hot

temperature. Turn the dial between the middle

and the left position to select the cool tem-

perature.

For models with Stop/Start System or Idling

Stop System:

The Stop/Start System or Idling Stop System

will not activate when the front defogger is

turned on.

Controls

Turning system on/off:

To turn on the system, turn the fan speed

control “

” dial out of the OFF position. Turn

the dial counterclockwise to the OFF position

to turn off the system.

4-32 Display screen, heater and air conditioner, and audio system

3. Turn the fan speed control “

desired position.

4. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

” dial to the

Air flow control:

Heater operation

Heating:

Push the air flow control buttons to select the

air flow outlets. More than one air flow control

button can be selected at a time.

This mode is used to direct heated air from the

foot outlets.

—

Air flows mainly from center and side

ventilators.

1. Push the air recirculation “

” button for

Air conditioner operation

normal heating. (The indicator light will turn

—

Air flows mainly from the foot outlet.

off.)

The air conditioner system should be operated

for approximately 10 minutes at least once a

month. This helps prevent damage to the air

conditioner system due to the lack of lubrica-

tion.

Air flows mainly from the front de-

2. Push the “

will turn on.)

” button. (The indicator light

fogger.

3. Turn the fan speed control “

” dial to the

MAX defogging/defrosting:

Push the front defogger “

desired position.

MAX” button to

Cooling:

4. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

turn on the MAX defogging/defrosting mode

and quickly defog/defrost the windshield.

When this mode is turned on, the “A/C”

indicator light will turn on and the air circula-

tion will be fixed at the outside air circulation

This mode is used to cool and dehumidify the

air.

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

Ventilation:

This mode directs outside air from the side and

mode. The “

” indicator light will also turn on.

2. Push the “

” button. (The indicator light

center ventilators.

For the best performance, turn the tempera-

ture control dial to the maximum hot position

and set the fan speed at its maximum.

will turn on.)

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

3. Turn the fan speed control “

desired position.

” dial to the

2. Push the “

” button. (The indicator light

Air intake control:

4. Push the “A/C” button. (The indicator light

will turn on.)

The air intake control mode will change each

will turn on.)

3. Turn the fan speed control “

desired position.

4. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

” dial to the

time the air recirculation

pushed.

“

” button is

5. Turn the temperature control dial to the

desired position between the middle and

the cool (left) position.

A visible mist may be seen coming from the

ventilators in hot, humid conditions as the air is

cooled rapidly. This does not indicate a mal-

function.

.

When the indicator light is turned on, the air

recirculates inside the vehicle.

.

When the indicator light is turned off, the air

flow is drawn from outside the vehicle.

Heating and defogging:

A/C (Air Conditioner) operation:

This mode heats the interior and defogs the

windows.

Push the “A/C” button to turn on or off the air

conditioner. When the air conditioner is on, the

“A/C” indicator light on the button illuminates.

Dehumidified heating:

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

This mode is used to heat and dehumidify the

air.

2. Push the “

” and “

” buttons. (The

1. Push the air recirculation “

indicator light will turn off.)

” button. (The

indicator lights will turn on.)

Display screen, heater and air conditioner, and audio system 4-33

2. Push the “

will turn on.)

” button. (The indicator light

AUTOMATIC AIR CONDITIONER AND HEATER (Type A)

3. Turn the fan speed control “

” dial to the

desired position.

4. Push the “A/C” button. (The indicator light

will turn on.)

5. Turn the temperature control dial to the

desired position between the middle and

the hot (right) position.

JVH0665X

1.

2.

Front defogger “

” button

Turning the system on/off

“ON·OFF” button/Temperature control

Push the “ON·OFF” button to turn on and off the

system.

dial (for left side seat)

3.

4.

5.

6.

“MODE” button

Display screen

“A/C” (Air Conditioner) button

Automatic operation (AUTO)

The AUTO mode may be used year-round as

the system automatically controls the air con-

ditioner to a constant temperature, air flow

distribution and fan speed after the desired

temperature is set manually.

“DUAL” button/Temperature control dial

(for right side seat)

7.

Rear defogger “

” button (See “Defog-

ger switch” (P.2-64).)

Cooling and dehumidified heating:

8.

9.

Air recirculation “

Fan speed control “

” button

1. Push the “AUTO” button (the indicator light

will turn on).

10. “AUTO” button

11.

2. Turn the temperature control dial to set the

desired temperature.

Outside air circulation “

” button

For models with Stop/Start System or Idling

.

When the DUAL indicator light is not

Stop System:

illuminated, pushing the “DUAL” button

(the indicator light will turn on) allows

the user to independently change the

driver and passenger side temperatures

with the corresponding temperature

control dial.

The Stop/Start System or Idling Stop System

will not activate when the front defogger is

turned on.

4-34 Display screen, heater and air conditioner, and audio system

.

To cancel the separate temperature

setting, push the “DUAL” button (the

indicator light will turn off) and the

driver’s side temperature setting will be

applied to both the driver and passenger

sides.

Do not set the temperature too low when the

ture control dial changes only the front

passenger’s side temperature. (The DUAL

indicator light will illuminate and “DUAL” will

appear on the display.)

To cancel the separate temperature

setting, push the “DUAL” button (the indi-

cator light will turn off) and the driver’s side

temperature setting will be applied to both

the driver and passenger sides.

front defogger mode is on (the “

” indicator

light is illuminated), because doing so may fog

up the windshield.

.

Manual operation

The manual mode can be used to control the

heater and air conditioner to your desired

settings.

3. Push and hold either the outside air circu-

lation “ ” button or the air recirculation

“

” button to switch to the automatic air

intake control mode.

Fan speed control:

Air intake control:

When setting the automatic control mode,

both indicator lights will flash twice indicat-

ing that the system is in the automatic

control mode.

Push the fan speed control button (“

” side

.

Push the air recirculation “

” button to

or “

” side) to manually control the fan

recirculate interior air inside the vehicle.

The indicator light on the button will come

on.

speed.

Push the “AUTO” button to change the fan

A visible mist may be seen coming from the

ventilators in hot, humid conditions as the air is

cooled rapidly. This does not indicate a mal-

function.

Push the outside air circulation

“

”

speed to the automatic mode.

button to draw outside air into the pas-

senger compartment. The indicator light on

the button will come on.

Air flow control:

Push the “MODE” button to select the desired

mode:

To control the air intake automatically,

Dehumidified defrosting/defogging:

push and hold either the air recirculation

1. Push the front defogger “

” button (The

—

Air flows mainly from the center and

side ventilators.

“

” button or the outside air circulation

” button (whichever indicator light is

indicator light on the front defogger “

button will illuminate).

”

Air flows mainly from the center and

illuminated). The indicator lights (both air

recirculation and outside air circulation

buttons) will flash twice, and then the air

intake will switch to automatic control.

When the automatic control is set, the

system automatically alternates between

side ventilators and foot outlets.

2. Turn the temperature control dial to set the

desired temperature.

Air flows mainly from the foot outlet

and partly from the defogger.

.

To quickly remove frost from the outside

surface of the windshield, set the tempera-

ture control and the fan speed to the

maximum levels.

Air flows mainly from the front de-

fogger outlets and foot outlets.

the outside air circulation “

recirculation “ ” modes. (The indicator

light of the active mode will turn on.)

” and the air

Temperature control:

.

After the windshield is cleared, push the

“AUTO” button again (the AUTO indicator

light will turn on).

Turn the temperature control dial to set the

desired temperature.

NOTE:

When the front defogger “

” button is

.

When the DUAL indicator light is not

illuminated, pushing the “DUAL” button

(the indicator light will turn on) allows the

user to independently change the driver

and passenger side temperatures with the

corresponding temperature control dial.

Even if the system is manually set to the air

recirculation mode, when outside tempera-

ture and coolant temperature are both low,

the system may automatically switch to the

outside air circulation mode.

pushed, the air conditioner will turn on

when the outside air temperature is above

approximately −2°C (28°F) to defog the

windshield. The air recirculation mode will

automatically turn off. The outside air

circulation mode “

” will be selected to

Also turning the passenger’s side tempera-

improve the defogging performance.

Display screen, heater and air conditioner, and audio system 4-35

To turn the system off:

AUTOMATIC AIR CONDITIONER AND HEATER (Type B)

To turn off the heater and air conditioner, push

the “ON·OFF” button.

Push the “ON·OFF” button again, the system will

turn on in the mode which was used immedi-

ately before the system was turned off.

JVH0828X

1.

“A/C” (Air Conditioner) button

Turning the system on/off

2.

3.

4.

5.

6.

Front defogger “

Air recirculation “

Fan speed control “

“ON·OFF” button

MAX” button

” button

Push the “ON·OFF” button to turn on and off the

system.

” button

Automatic operation (AUTO)

The AUTO mode may be used year-round as

the system automatically controls the air con-

ditioner to a constant temperature, air flow

distribution and fan speed after the desired

temperature is set manually.

Rear defogger “

” button (See “Defog-

ger switch” (P.2-64).)

7.

“AUTO” button/Temperature control dial

(for left side seat)

8.

9.

Air flow control buttons

Cooling and dehumidified heating:

“DUAL” button/Temperature control dial

1. Push the “AUTO” button (the indicator light

(for right side seat)

will turn on).

For models with Stop/Start System or Idling

Stop System:

The Stop/Start System or Idling Stop System

will not activate when the front defogger is

turned on.

2. Turn the temperature control dial to set the

desired temperature.

.

When the DUAL indicator light is not

illuminated, pushing or turning the

“DUAL” button (the indicator light will

turn on) allows the user to indepen-

dently change the driver and passenger

side temperatures with the correspond-

ing temperature control dial.

4-36 Display screen, heater and air conditioner, and audio system

.

To cancel the separate temperature

setting, push the “DUAL” button (the

indicator light will turn off) and the

driver’s side temperature setting will be

applied to both the driver and passenger

sides.

on.

Air flow control:

.

To control the air intake automatically,

Push one of the air flow control buttons to

select or deselect the air flow outlets. More

than one air flow control button can be

selected at a time.

push and hold the air recirculation “

”

button . The air intake will then be con-

trolled automatically. When automatic con-

trol is set, the system automatically

alternates between the outside air circula-

tion and the air recirculation modes. (The

active mode will be displayed.)

—

Air flows mainly from the center and

side ventilators.

A visible mist may be seen coming from the

ventilators in hot, humid conditions as the air is

cooled rapidly. This does not indicate a mal-

function.

Air flows mainly from the foot outlet

and partly from the defogger.

NOTE:

Air flows mainly from the front de-

fogger outlets.

MAX defrosting/defogging:

Push the front defogger “

Even if the system is manually set to the air

recirculation mode, when outside tempera-

ture and coolant temperature are both low,

the system may automatically switch to the

outside air circulation mode.

MAX” button to

turn on the MAX defogging/defrosting mode

and quickly defog/defrost the windshield.

When this mode is turned on, the fan will be

at its maximum speed, the “A/C” indicator light

will turn on, and the air circulation will be fixed

at the outside air circulation mode.

Temperature control:

Turn the temperature control dial to set the

desired temperature.

SERVICING AIR CONDITIONER

.

When the DUAL indicator light is not

illuminated, pushing or tuning the “DUAL”

button (the indicator light will turn on)

allows the user to independently change

the driver and passenger side tempera-

tures with the corresponding temperature

control dial.

To cancel the separate temperature

setting, push the “DUAL” button (the indi-

cator light will turn off) and the driver’s side

temperature setting will be applied to both

the driver and passenger sides.

WARNING:

Do not set the temperature too low when the

front defogger mode is on (the

“

MAX”

The air conditioner system contains refriger-

ant under high pressure. To avoid personal

injury, any air conditioner service should be

done only by an experienced technician with

the proper equipment.

indicator light is illuminated), because doing so

may fog up the windshield.

.

Manual operation

The manual mode can be used to control the

heater and air conditioner to your desired

settings.

The air conditioner system in your vehicle is

charged with a refrigerant designed with the

environment in mind.

This refrigerant will not harm the earth’s

ozone layer. However, it may contribute in a

small part to global warming.

Special charging equipment and lubricant are

required when servicing your vehicle’s air con-

ditioner. Using improper refrigerants or lubri-

cants will cause severe damage to the air

conditioner system. (See “Air conditioner sys-

tem refrigerant and lubricant” (P.9-7).)

Fan speed control:

Air intake control:

Push the fan speed control button (“

” side

.

Push the air recirculation “

” button to

or “

” side) to manually control the fan

draw outside air into the passenger com-

partment. The indicator light on the button

will turn off.

speed.

Select the outside air circulation mode for

normal heating or air conditioning opera-

tion.

.

Push the air recirculation “

” button to

recirculate interior air inside the vehicle.

The indicator light on the button will come

A NISSAN dealer will be able to service your

environmentally friendly air conditioner system.

Display screen, heater and air conditioner, and audio system 4-37

AUDIO SYSTEM (if equipped)

For Thailand and Indonesia:

.

Do not expose the CD to direct sunlight.

Air conditioner filter

CDs that are of poor quality, or are dirty,

scratched, covered with fingerprints, or

that have pin holes may not work properly.

Refer to NissanConnect Owner’s Manual for the

The air conditioner system is equipped with an

air conditioner filter. To make sure the air

conditioner heats, defogs, and ventilates effi-

ciently, replace the filter according the specified

audio system operations.

AUDIO OPERATION PRECAUTIONS

.

The following CDs may not work properly.

— Copy control compact discs (CCCD)

— Recordable compact discs (CD-R)

— Rewritable compact discs (CD-RW)

maintenance intervals listed in

a separate

WARNING:

maintenance booklet. To replace the filter,

contact a NISSAN dealer.

Do not adjust the audio system while driving

so that full attention may be given to vehicle

operation.

The filter should be replaced if the air flow

decreases significantly or if windows fog up

easily when operating the heater or air condi-

tioner.

Radio

.

Radio reception is affected by station signal

strength, distance from radio transmitter,

buildings, bridges, mountains and other

external influences. Intermittent changes

in reception quality normally are caused by

these external influences.

.

Using a cellular phone in or near the vehicle

may influence radio reception quality.

Some cellular phones or other devices may

cause interference or a buzzing noise to

come from the audio system speakers.

Storing the device in a different location

may reduce or eliminate the noise.

Compact Disc (CD) player

.

During cold weather or rainy days, the

player may malfunction due to the humid-

ity. If this occurs, remove the CD from CD

player and dehumidify or ventilate the

player completely.

.

The player may skip while driving on rough

SAA0480

roads.

The CD player sometimes may not function

when the passenger compartment tem-

perature is extremely high. Lower the

temperature before use.

.

Do not use the following CDs as they may

cause the CD player to malfunction.

4-38 Display screen, heater and air conditioner, and audio system

Display screen, heater and air conditioner, and audio system -> Heater and air conditioner for Your Nissan X Trail SUV 2020

Popular Manuals