Get Display screen, heater and air conditioner, and audio system -> Voice Recognition system Guide for Nissan X Trail SUV 2020

VOICE RECOGNITION SYSTEM (if equipped

except for Thailand and Indonesia)

The Voice Recognition system allows hands-

free operation of the systems equipped on this

vehicle, such as the phone and navigation

systems.

display. Select “Both” to have text notifica-

tions shown in both the vehicle information

display and the center display screen.

Select “Off” to turn off all text notifications.

TELEPHONE SETUP

To access the phone settings screen:

1. Push the SETUP button.

Auto Reply (Mexico only):

2. Touch the “Phone & Bluetooth”/“Telephone

To operate the Voice Recognition system, push

& Bluetooth” key.

the

button located on the steering wheel.

Select “On” to have the system automati-

cally reply to caller with a predetermined

text message. Select “Off” to turn off auto

reply function.

When prompted, speak the command for the

system you wish to activate. The command

given is picked up by the microphone and

performed when it is properly recognized. The

Voice Recognition will provide a voice response

as well as a message in the center display to

inform you of the command results.

3. Touch the “Telephone Setup” key.

Available setting items:

Sort Phonebook By:

Auto Reply Message (Mexico only):

Select “First Name” or “Last Name” to

choose how phonebook entries are alpha-

betically displayed on the screen.

Select to indicate preferred message to be

used when “Auto Reply” function is acti-

vated.

From Phonebook/Use Phonebook from:

Use Vehicles’s Signature (Mexico only):

CONTROL BUTTONS AND MICROPHONE

Steering wheel mounted controls:

Select “Phone” to use the handset’s phone-

book. Select “SIM” to use the phonebook on

the SIM card. Select “Both” to use both

sources.

Select “On” to have vehicle signature shown

in outgoing text messages or “Off” to

deactivate the function.

Custom Text Messages (Mexico only):

Download Phonebook Now:

Select this option to select

custom

Select to download the phonebook to the

message to edit. There are

message slots available.

4 customer

vehicle from the chosen source.

Record name for Phonebook Entry (Mexico

only):

Select to record a name for a phonebook

entry for use with the voice recognition

system.

Phone Notifications for:

JVH1555X

Select “Driver” to have phone notifications

shown in the vehicle information display.

Select “Both” to have phone notifications

shown in both the vehicle information

display and the center display screen.

Back

Talk

Cancel

button

Microphone:

Microphone is located near the map lights.

Text Messaging (Mexico only):

Select “On” or “Off” to activate or deactivate

text messaging feature. See “Text messa-

ging (for Mexico)” (P.4-94).

Show Incoming Text (Mexico only):

Select “Driver” to have incoming text noti-

fications shown in the vehicle information

4-96 Display screen, heater and air conditioner, and audio system

cessed using the control panel display

1. Push the INFO button on the control panel.

2. Touch the “Voice Commands” key.

Bluetooth® Hands-Free Phone System

Navigation

Audio

Information

My Apps

USING THE SYSTEM

Initialization

When the ignition switch is in the “ON” position,

the Voice Recognition system is initialized,

which takes a few seconds. When completed,

the system is ready to accept voice commands.

Operating tips

To get the best performance out of the Voice

For additional information on the navigation

system, see the separate Navigation System

Owner’s Manual.

Recognition system, observe the following:

If the

button is pushed before the initi-

Keep the interior of the vehicle as quiet as

possible. Close the windows to eliminate

the surrounding noises (traffic noises, vi-

bration sounds, etc.), which may prevent

the system from recognizing the voice

commands correctly.

alization completes, the system will announce

that the system is not ready for voice recogni-

tion session.

How to say numbers

The Voice Recognition system requires a cer-

tain way to speak numbers in voice commands.

Refer to the following examples.

Giving voice commands

1. Push the

button.

Wait until a tone sounds before speaking a

command. Otherwise, the command will

not be received properly.

General rule: Either “zero” or “oh” can be used

2. The system announces and prompts you to

for “0”.

speak

a command. A list of available

Phone numbers

commands is then spoken by the system.

Start speaking a command within 3.5

Speak phone numbers according to the follow-

ing example. For 1-800-662-6200, say dial

number and then speak the phone number in

any of the following formats:

3. After the tone sounds and the face icon on

the display changes, speak a command.

Refer to “Voice commands” (P.4-98) for the

available commands.

seconds after the tone sounds.

Speak in a natural voice without pausing

between words.

“one eight oh oh six six two six two oh oh”

4. Voice and display feedback are provided

SYSTEM FEATURES

when the command is accepted.

“one eight hundred six six two six two oh

oh”

Push the

button on the instrument

“one eight zero zero six six two six two oh

oh”

panel to return to the previous screen.

If the command is not recognized, the

system announces provides a list of avail-

able selections.

For the best voice recognition phone dialing

results, say phone numbers as single digits.

Also, full numbers can only be spoken for “800”.

For example, you cannot say 555-6000 as “five

five five six thousand”.

If you want to cancel the command or go

back to the previous menu of commands,

push the

Push the

button.

button to move back through

the menus displayed on the screen.

JVH0865X

If you want to adjust the volume of the

voice feedback, use the volume control

switches on the steering wheel or the

Power/VOLUME dial on the control panel.

The Voice Recognition system can activate the

following systems:

Operation on the control panel display:

The voice command screen can also be ac-

Display screen, heater and air conditioner, and audio system 4-97

entry. Say “Send Text” to send

a text

VOICE COMMANDS

Navigation commands

message to the number of the phonebook

entry. Say “Next Entry” to skip to the next

alphabetical entry in the vehicle phone-

book, where the same options will then be

available.

The following voice commands are available for

Bluetooth® Hands-Free Phone System

commands

the Navigation System:

Street Address (address)

Points of Interest (name)

POI by Category

Home

To access the Bluetooth® Hands-Free Phone

System voice commands:

Recent Calls

1. Push the

button.

The system prompts for an additional

command. Say “Missed Calls”, “Incoming

Calls” or “Outgoing Calls” to display a list

of such calls on the screen.

2. Say “Call” and then a name in the vehicle

phonebook to call that entry. Otherwise,

say “Phone” to access various phone com-

mands.

If the Bluetooth® has been set to “Off”, the

system will ask if you wish to turn the Blue-

tooth® on.

If no phone is connected to the system and the

vehicle is stationary, the system will ask if you

wish to connect a phone. Say “Yes” to connect a

phone. All further Bluetooth® Hands-Free

Phone System voice commands are only avail-

able if a phone is connected.

If a phone is connected and Bluetooth® is set to

“On”, the following voice commands are avail-

able:

Address Book

Previous Destinations

Enter Address in Steps

Cancel Route

Speak the number of the entry displayed

on the screen to dial that number or say

“Next Page” to view entries on the next

page (if available).

For more information about these commands,

see the separate Navigation System Owner’s

Manual.

Redial

Redials the last called number.

Read Text

Audio commands

To access the audio system voice commands:

Reads an incoming text message. For more

information about text messaging with the

Bluetooth® Hands-Free Phone System, see

“Bluetooth® Hands-Free Phone System (for

type D audio)” (P.4-92).

1. Push the

button.

2. Say “Audio”.

3. Speak

a command from the following

available commands:

Send Text

Play (AM, FM, etc.)

Sends a text message. For more informa-

tion about text messaging with the Blue-

tooth® Hands-Free Phone System, see

“Bluetooth® Hands-Free Phone System (for

type D audio)” (P.4-92).

Call (a name)

Allows user to select radio band

Speak the name of the contact in which

you are trying to call. System will confirm

correct contact. Say “Dial” to initiate dialing.

Tune AM (number)

Allows user to tune directly to a desired

AM frequency

Dial Number

Select Phone

Allows for up to 24 digits to be dialed. After

the number is entered, say “Dial” to initiate

dialing. Say “Correction” to correct the

number entered. Say “Go Back” to return

to the main menu.

Tune FM (number)

The system prompts you to use manual

controls to continue. Use manual controls

to change the active phone from among

the listed phones connected to the vehicle.

Allows user to tune directly to a desired

FM frequency

CD Track (number)

For more information about the Bluetooth®

Hands-Free Phone System, see “Bluetooth®

Hands-Free Phone System (for type D audio)”

(P.4-92).

Allows user to select track to be played

List Phonebook

Starting with the first alphabetical entry in

the vehicle phonebook, the system

prompts for an additional command. Say

“Dial” to call the number of the phonebook

Play Song (name)

Allows user to select song name to be

played

4-98 Display screen, heater and air conditioner, and audio system

Play Artist (name)

Allows user to select artist to be played

Play Album (name)

Allows user to select album name to be

played

For more information about the audio system,

see “Audio system” (P.4-38).

My Apps commands

Many Apps can be accessed using this voice

command. See “NissanConnect App smart-

phone integration” (P.4-71) for more informa-

tion.

Help commands

The following voice commands can be spoken

to have the system provide instructions and

tips for using the Voice Recognition system.

List Commands

What Can I Say?

General Help

Quit

Exit

Display screen, heater and air conditioner, and audio system 4-99

TROUBLESHOOTING GUIDE

The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for

the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved.

Symptom/error message

Solution

Ensure that the command format is valid. Use the “List Commands” or “What Can I Say?”

The system fails to recognize the command

correctly.

command under the “Help” menu.

Speak clearly without pausing between words and at a level appropriate to the ambient noise

level.

Ensure that the ambient noise level is not excessive (for example, with the windows open or the

defogger turned on).

NOTE:

If it is too noisy to use the phone, it is likely that voice commands will not be recognized.

If optional words of the command have been omitted, then the command should be tried with

these in place.

4-100 Display screen, heater and air conditioner, and audio system

Display screen, heater and air conditioner, and audio system -> Voice Recognition system for Your Nissan X Trail SUV 2020

Popular Manuals