SUNROOF (if equipped)
Sliding sunshade and sunroof
Comfort mode
WARNING:
When the sunroof switch is pushed to the OPEN
This is the position used when driving with the
sunroof open. When driving with the sunroof
fully open, wind noise may be very loud. Use the
comfort mode position when driving.
.
.
In an accident you could be thrown from
the vehicle through an open sunroof.
Adults should always use seat belts and
children should always use seat belts or
child restraint systems.
Never allow anyone to stand up or extend
any portion of their body out of the
opening while the vehicle is in motion or
while the sunroof is closing.
position
, the sunshade open fully. When a
switch is pushed again, the sunroof opens to
the comfort mode position. When the switch is
pushed again, the sunroof opens fully.
Auto-reverse function
When the sunroof switch is pushed to the
CLOSE position , the sunroof will automati-
cally close. Push the switch again, and the
sunshade will close.
WARNING:
There are some small distances just before
the closed position which cannot be de-
tected. Make sure that all passengers have
their hands, etc. inside the vehicle before
closing the sunroof and sunshade.
When the sunroof switch is pushed to the OPEN
position
to the second detent, the sunshade
opens fully, and the sunroof opens to the
comfort mode position. When the switch is
pushed again, the sunroof opens fully. When
the sunroof switch is pushed to the CLOSE
CAUTION:
.
.
.
Remove water drops, snow, ice or sand
from the sunroof before opening.
The auto-reverse function enables the sunroof
and sunshade to automatically reverse when
something is caught in the sunroof and sun-
shade as it is closing. When the control unit
detects an obstacle, the sunroof and sunshade
will open immediately.
Depending on the environment or driving
conditions, the auto-reverse function may
activate if an impact or load similar to some-
thing being caught in the sunroof and sun-
shade occurs.
Do not place any heavy objects on the
position
to the second detent, both the
sunroof or surrounding area.
sunshade and sunroof close.
Do not push or pull on the sunshade.
Doing so can damage the sunshade.
To stop the sunshade or sunroof during the
operation, push the sunroof switch to either of
the OPEN , CLOSE
Tilting sunroof
or UP
position.
AUTOMATIC SUNROOF AND SUNSHADE
To tilt up the sunroof, push the sunroof switch
to the up position
To tilt down the sunroof, push the switch to the
up position or push the switch to the CLOSE
position
When the sunroof is tilted up, push the switch
.
If the auto-reverse function activates consecu-
tively or the battery is discharged, the sunroof
and sunshade may not close properly. In this
case, push and hold the switch to the CLOSE
.
to the CLOSE position to the second detent
.
position
to close the sunroof.
The sunroof will tilt down and the sunshade will
close.
JVI0950X
Instruments and controls 2-67