Get Instruments and controls -> Vehicle information display Guide for Nissan X Trail SUV 2020

VEHICLE INFORMATION DISPLAY

For language settings, see “Language” (P.2-30).

Parking brake reminder chime

The chime will sound if the vehicle is driven at

HOW TO USE THE VEHICLE INFORMA-

TION DISPLAY

more than

7 km/h (4 MPH) (models not

equipped with electronic parking brake) or 4

km/h (2 MPH) (models equipped with electronic

parking brake) with the parking brake applied.

Stop the vehicle and release the parking brake.

Stop/Start System or Idling Stop Sys-

tem reminder buzzer (if equipped)

The engine will shift to the normal stopped

state if any of the following operations is made

during Stop/Start System or Idling Stop System

activation, and the Stop/Start System or Idling

Stop System buzzer will sound if:

JVI0641X

The vehicle information display

is located

between the tachometer and the speed-

ometer. It displays following items if the vehicle

is equipped with them:

JVI1566X

The driver’s seat belt is unfastened and the

driver’s door is open (MT models).

Vehicle settings

Trip computer information

Driver Assistance

Speed limiter information

Cruise control system information

The vehicle information display can be chan-

The vehicle engine hood is open.

ged using the buttons OK

Close the hood or the driver’s door, or fasten

the seat belt then restart the engine using the

ignition switch.

and

located on the steering wheel.

OK - change or select an item in the

vehicle information display

For more information, see “Stop/Start System

- navigate through the items in vehi-

cle information display

Intelligent Cruise Control (ICC) system in-

or Idling Stop System” (P.5-24).

formation

- go back to the previous menu

ProPILOT system information

Intelligent Key operation information

Audio information

- change from one display screen

to the next (i.e. trip, Fuel economy)

The buttons on the steering wheel mounted

controls are also used to control audio func-

tions. For additional information, see “Steering

wheel mounted controls for audio” (P.4-73) or

the separate NissanConnect Owner’s Manual (if

equipped).

Navigation - turn by turn

Indicators and warnings

Tyre pressure information

Chassis Control

AdBlue® Selective Catalytic Reduction (SCR)

system information

Other information

Please note that the information used in this

manual is written in UK English. There are a few

differences in the information for the UK and

U.S. English versions of the system.

2-22 Instruments and controls

Driving Aids (if equipped)

Driver Attention (if equipped)

Traffic Sign (if equipped)

Parking Aids (if equipped)

Chassis Control

138), “Lane Departure Warning (LDW) system

(ICC/manual transmission model)” (P.5-98),“Pro-

PILOT Lane Departure Warning (LDW) system”

(P.5-126),“Lane Departure Warning (LDW)” (P.5-

39), “ProPILOT Intelligent Lane Intervention

system” (P.5-129) and “Blind Spot Warning

(BSW)” (P.5-48).

STARTUP DISPLAY

When the ignition switch is placed in the “ON”

position, the screens that display in the vehicle

information display include:

Trip computer

Fuel economy

Warnings

Driving Aids (if equipped) :

To change the status, warnings or turn on or

Driver Attention (if equipped) :

Intelligent Driver Alertness ON/OFF

Warnings will only display if there are any

present, for more information on warnings

and indicators, see “Vehicle information display

warnings and indicators” (P.2-31).

off any of the systems/warnings displayed in

the “Driving Aids” menu, use the

to select and the OK button

menu item:

button

Traffic Sign (if equipped) :

Traffic Sign ON/OFF

to change a

To control what items display in the vehicle

Steering Assist (if equipped)

Parking Aids (if equipped) :

information display, see “Settings” (P.2-23).

Press the OK button

to turn the Steering

To change the status or turn on or off any of

Assist system ON/OFF.

SETTINGS

the systems displayed in the “Parking Aids”

Emergency Brake (if equipped)

menu, use the

OK button

button

to select and the

The setting mode allows you to change the

information displayed in the vehicle informa-

tion display:

Press the OK button

to turn the Intelli-

to change a menu item:

gent Emergency Braking system ON/OFF.

Moving Object (if equipped)

Lane (if equipped)

— Warning

Press the OK button

to turn the Moving

Driver Assistance

Clock

Object Detection (MOD) (if equipped) ON/

Press the OK button

to turn the Lane

OFF.

Display Settings

Vehicle Settings

Maintenance

Departure Warning (LDW) system ON/

OFF.

Cross Traffic (if equipped)

Press the OK button

to turn the Rear

— Assist (if equipped)

Cross Traffic Alert (RCTA) (if equipped) ON/

Alert

Press the OK button

to turn the

OFF.

Intelligent Lane Intervention system

ON/OFF.

Tyre Pressures (if equipped)

Units (if equipped)

Language (if equipped)

Factory Reset

Front Sensor (if equipped)

Press the OK button

to turn ON/OFF.

Blind Spot (if equipped)

Rear Sensor (if equipped)

Press the OK button

to turn the Blind

Press the OK button

Display (if equipped)

Press the OK button

Volume (if equipped)

— High/Med./Low

Range (if equipped)

— Far/Mid./Near

to turn ON/OFF.

Spot Warning (BSW) system ON/OFF.

— Warning (if equipped)

Driver Assistance

to turn ON/OFF.

Press the OK button

to turn the Blind

To change the status, warnings or turn on or

off any of the systems/warnings displayed in

the “Driver Assistance” menu, use the

Spot Warning (BSW) system ON/OFF.

For additional information, see “ProPILOT” (P.5-

104), “Intelligent Cruise Control (ICC) and steer-

ing assist (If equipped for European Manual

Transmission model)” (P.5-77), “Intelligent Emer-

gency Braking” (P.5-133), “Intelligent Emergency

Braking with pedestrian detection system” (P.5-

button

to select and the OK button

change a menu item:

For additional information, see “Rear Cross

Traffic Alert (RCTA)” (P.5-54), “Parking sensor

Instruments and controls 2-23

(sonar) system” (P.5-149) and “Intelligent Around

View Monitor/Around View Monitor” (P.4-11).

Time Zone (if equipped):

Select the applicable time zone from the list.

Display Settings

The display settings allows the customer to

choose from the various meter selections.

Chassis Control:

For models with NissanConnect navigation or

audio system:

To change the status, warnings or turn on or

off any of the systems/warnings displayed in

the “Chassis Control” menu.

The display settings can be changed using the

and the OK

buttons.

Automatic Time:

Contents Selection:

The adjustment settings can be selected from

Use the

button

to select and the OK

“Auto”, “Manual” and “Time Zone”.

The items that display when the ignition switch

is placed in the “ON” position can be enabled/

disabled. To change the items that are dis-

button

to change a menu item:

Auto

Manual

Time Zone

Trace Control

— See “Intelligent Trace Control” (P.5-35) for

played, use the

button

to scroll and the

more information.

Press the OK button

Engine Brake (if equipped)

OK button

to select a menu item.

12H/24H:

to turn ON/OFF.

Body Colour:

The time setting can be selected from 12 hour

The color of the vehicle that displays in the

vehicle information display when the ignition

switch is placed in the “ON” position can be

changed.

and 24 hour formats.

— See “Intelligent Engine Brake (Continu-

ously Variable Transmission (CVT)/Dual

Clutch Transmission (DCT) models)” (P.5-

36) for more information.

D.S.T:

Turns the Daylight Savings Time on or off.

1. Use the

button until “Body Colour” is

Press the OK button

to turn ON/OFF.

Time Zone:

Select the applicable time zone from the list.

selected, and press OK button

Clock

2. Select the body color using the

button

and press OK button

Set Clock Manually:

For models without navigation or audio

system:

The clock can be adjusted manually using the

ECO Mode Settings (if equipped):

and the OK

buttons.

Set Clock:

This setting allows the customer to change the

ECO mode system settings.

The clock setting can be changed using the

NOTE:

and the OK

buttons.

Use the

button

until “ECO Mode

The clock is synchronized with the clock on

the center display. To set the clock on center

display, see the separate NissanConnect

Owner’s Manual.

Settings” is selected, and press OK button

12H/24H:

- ECO Glow

The time setting can be selected from 12 hour

This setting allows the customer to enable/

disable the ambient ECO indicator in the

vehicle information display.

and 24 hour formats.

For models with navigation or audio system

D.S.T (if equipped):

Turns the Daylight Savings Time on or off.

(except for NissanConnect):

To set the clock, see “Clock” (P.4-7), “Audio main

operation” (P.4-47), “Audio main operation” (P.4-

55) or “Audio main operation” (P.4-61) or the

separate Navigation System Owner’s Manual (if

equipped).

1. Use the

button

to select “ECO Glow”.

to turn ON/OFF the

2. Press the OK button

ambient ECO in the vehicle information

display.

- Display

2-24 Instruments and controls

2. Press the OK button

to turn ON/OFF the

Stop/Start (if equipped):

ECO management display in the vehicle

To change the status, warnings or turn on or

information display.

- View History

This setting allows the customer to reset the

past history of the fuel economy and the best

fuel economy.

off any of the systems/warnings displayed in

the “Stop/Start” menu, use the

button to

select and the OK button

to change a menu

item:

Display

— Stop/Start display ON/OFF

Trip CO2 Saving

Welcome Effect:

You can choose whether or not to display the

welcome screen when the ignition switch is

placed in the “ACC” or “ON” position. You can

also choose the following items to define how

the welcome screen looks:

The “Trip CO2 Saving” and engine stop time

mode shows the CO2 saving and engine

stop time since the last reset. The CO2

saving and engine stop time can be reset

WAC0086X

Type A

by pushing the OK button

Total CO2 saving

Dial and Pointer

Display Effect

The “Total CO2 Saving” and engine stop

Select “Welcome Effects” using the

button

time mode shows:

and press the OK button

menu. Use the button

to select this

to navigate

— The estimated CO2 exhaust emissions

prevented.

between the menu options and press the OK

— The engine stop time that the engine

has been stopped by the “Stop/Start or

Idling Stop” System.

button

to turn each function ON/OFF.

Vehicle Settings

The vehicle settings allows the customer to

NOTE:

JVI0665X

change settings for the following settings.

Type B

The “Total CO2 saving” and engine stop

time values cannot be reset and show

accumulated “Stop/Start or Idling Stop”

System information since the vehicle was

built.

Lighting

Turn Indicator

Unlocking

Wipers

Mirrors

Remote Start (if equipped)

Driving Position (if equipped)

This setting allows the customer to enable/

disable the ECO pedal guide function.

1. Use the

button

to select “Display”.

to select “Pedal

2. Press the OK button

ECO Drive Report (if equipped):

- Display

This setting allows the customer to enable/

disable the ECO Drive Report in the vehicle

information display.

Guide” or “Fuel econ.”.

For detailed information, see “ECO mode sys-

tem” (P.5-145).

The vehicle settings can be changed using the

, and the OK buttons.

1. Use the

button

to select “ECO Drive

Report”.

Instruments and controls 2-25

Lighting:

Unlocking (if equipped):

Wipers:

The “Lighting” menu has the following options:

There are the following options in the “Unlock-

Speed Dependent (if equipped)

ing” menu:

The “Speed Dependent” feature can be

activated or deactivated. From the “Wipers”

menu, select “Speed Dependent”. Use the

OK button to turn this feature ON or OFF.

Welcome Light

I–Key Door Lock (if equipped)

The welcome lighting can be set to be ON

or OFF. From the “Lighting” menu, select

When this item is turned on, the request

switch on the door is activated. From the

“Unlocking” menu, select “I-Key Door Lock”.

“Welcome Light”. Use the OK button

turn this feature ON or OFF.

Auto Wipe (if equipped)

Use the OK

button to activate or

The “Auto Wipe” feature can be activated or

Int. Lamp Timer

deactivate this function.

deactivated. From the “Wipers” menu, select

The internal light timer can be set to be ON

“Auto Wipe”. Use the OK button

this feature ON or OFF.

to turn

Selective Unlock (if equipped)

or OFF. From the “Lighting” menu, select

“Int. Lamp Timer”. Use the OK button

turn this feature ON or OFF.

When this item is turned on, and the door

handle request switch on the driver’s or

front passenger’s side door is pushed, only

the corresponding door is unlocked. All the

doors can be unlocked if the door handle

request switch is pushed again within 1

minute. When this item is turned to off, all

the doors will be unlocked when the door

handle request switch is pushed once.

From the “Unlocking” menu, select “Selec-

Rain Sensor (if equipped)

The “Rain sensor” feature can be activated

or deactivated. From the “Wipers” menu,

select “Rain Sensor”. Use the OK button

to turn this feature ON or OFF.

Auto Lights (if equipped)

The sensitivity of the Auto Light or the

Intelligent Auto Headlight can be adjusted.

From the “Lighting” menu, select “Auto

Reverse Link

Lights”. Use the

button

and the OK

to select the required sensitivity.

The “Reverse Link” wiper feature can be set

to be ON or OFF. From the “Wipers” menu,

select “Reverse Link”. Use the OK button

to turn this feature ON or OFF.

The following options are available:

— On Earliest

tive Unlock”. Use the OK button

activate or deactivate this function.

— On Earlier

Drip Wipe

— Standard

Auto Door Unlock (if equipped)

The “Drip Wipe” feature can be set to be ON

— On Later

This menu allows the user to customize the

auto door unlock options. The following

options are available:

or OFF. From the “Wipers” menu, select “Drip

Headlight Off Delay (if equipped)

Wipe”. Use the OK button

feature ON or OFF.

to turn this

The duration of the automatic headlights

can be changed from 0 to 180 seconds.

From the “Lighting” menu, select “Headlight

— Ignition OFF

— Shift to Park

— Off

Mirrors (if equipped):

Off delay”. Use the OK button

the duration.

to change

Auto Fold Off

When this item is turned on, the auto fold

Answer Bk. Horn (if equipped)

feature for the outside rearview mirrors is

Turn Indicator:

When the answer back horn is on the horn

will chirp and the hazard indicators will

flash once when locking the vehicle with

the Intelligent Key or remote keyless entry

function.

disabled. Use OK button

function.

Unfold at Ignition

to select this

The “3 Flash On” overtaking feature can be set

to be ON or OFF. From the “Turn Indicator”

menu, select “3 Flash On”. Use the OK button

to turn this feature ON or OFF.

When this item is turned on, the outside

rearview mirrors automatically fold when

the ignition switch is placed in the “OFF”

position, and unfold when the ignition

switch is placed in the “ON” position. Use

2-26 Instruments and controls

the OK button

to select this function.

maintenance booklet.

Maintenance

Unfold at Unlock

Tyre:

When this item is turned on, the outside

rearview mirrors automatically fold when

the vehicle doors are locked, and unfold

when the vehicles doors are unlocked. Use

This indicator appears when the customer set

distance comes for replacing tires. You can set

or reset the distance for replacing tires.

the OK button

to select this function.

WARNING:

Remote Start (if equipped):

The tire replacement indicator is not a sub-

stitute for regular tire checks, including tire

pressure checks. See “Changing tires and

wheels” (P.8-45). Many factors including tire

inflation, alignment, driving habits and road

conditions affect tire wear and when tires

should be replaced. Setting the tire replace-

ment indicator for a certain driving distance

does not mean your tires will last that long.

Use the tire replacement indicator as a guide

only and always perform regular tire checks.

Failure to perform regular tire checks, includ-

ing tire pressure checks could result in tire

failure. Serious vehicle damage could occur

The “Remote Start” feature allows user to turn

the remote engine start on or off. When turned

on, the engine can be started remotely. See

“Remote engine start” (P.3-20) for more infor-

mation.

WAC0092X

1. Service

2. Filter (if equipped)

3. Tyre

4. Other

5. AdBlue Status (if equipped)

Driving Position (if equipped):

Displays the available driving position options.

Exit Seat Slide

When this item is turned on, this feature will

move the driver’s seat backward for an

easy exit when the ignition is turned off and

the driver’s door is opened. After getting

into the vehicle and placing the ignition

switch in the ON position, the driver’s seat

will move to the previous set position. See

“Automatic drive positioner” (P.3-44) for

more information.

The maintenance mode allows you to set alerts

for the reminding of maintenance intervals. To

change an item:

and may lead to

a collision, which could

result in serious personal injury or death.

Select “Maintenance” using the

button

Other:

and press OK button

This indicator appears when the customer set

distance comes for checking or replacing

maintenance items other than the engine oil,

oil filter and tires. Other maintenance items can

include such things as air filter or tire rotation.

You can set or reset the distance for checking

or replacing the items.

Service:

This indicator appears when the customer set

distance comes for changing the engine oil and

filter. You can set or reset the distance for

checking or replacing these items. For sched-

uled maintenance items and intervals, see a

separate maintenance booklet.

AdBlue Status (if equipped):

Filter (if equipped):

You can use this option to check the level of

fluid in the AdBlue® tank. For more details, see

“AdBlue® Selective Catalytic Reduction (SCR)

system (if equipped for diesel engine model)”

(P.5-5).

This indicator appears when the customer set

distance comes for changing the oil filter. You

can set or reset the distance for checking or

replacing these items. For scheduled mainte-

nance items and intervals, see

a separate

Instruments and controls 2-27

Phone (if equipped):

Target Rear:

Alert

This setting allows the customer to enable/

disable the alert for an incoming call in the

vehicle information display.

The “Target Rear” tire pressure is the pressure

specified for the rear tires on the tire placard.

(See “Tire Pressure Monitoring System (TPMS)”

(P.5-9) and “Tire placard” (P.9-13).)

This setting allows the customer to set alarms.

Select “Alert” using the

button and press

OK button

1. Use the

button

to select “Phone”.

to turn ON/OFF the

Outside Temp. (if equipped):

Use the

button

and the OK button

2. Press the OK button

This setting allows the customer to enable/

disable the alert for outside temperature in the

vehicle information display.

select and change the value for the “Target

Rear”/“Target rear” tire pressure.

alert.

Mail (if equipped):

This setting allows the customer to enable/

disable the alert for a mail receiving in the

vehicle information display.

1. Use the

button

to select “Outside

Temp.”.

2. Press the OK button

alert.

to turn ON/OFF the

1. Use the

button

to select “Mail”.

2. Press the OK button

to turn ON/OFF the

Timer:

alert.

This setting allows the customer to set an alert

to notify the driver that the set time has been

reached.

1. Use the

2. Press the OK button

Tyre Pressures (if equipped)

The settings in the “Tyre pressures” menu are

all related to the Tire Pressure Monitoring

System (TPMS). (See “Tire Pressure Monitoring

System (TPMS)” (P.6-2), “Tire Pressure Monitor-

ing System (TPMS)” (P.5-9) and “Tire Pressure

Monitoring System (TPMS)” (P.8-44).)

button

to select “Timer”.

3. To change the timer amount, use the

button

and the OK button

to save the

selected time amount.

Target Front

Target Rear

Tyre Pressure Unit

Calibrate

Navigation (if equipped):

This setting allows the customer to enable/

disable the alert for navigation in the vehicle

information display.

Target Front:

1. Use the

button

to select “Naviga-

The “Target Front” tire pressure is the pressure

specified for the front tires on the tire placard.

(See “Tire Pressure Monitoring System (TPMS)”

(P.5-9) and “Tire placard” (P.9-13).)

tion”.

2. Press the OK button

alert.

to turn ON/OFF the

Use the

button

and the OK button

select and change the value for the “Target

Front”/“Target front” tire pressure.

2-28 Instruments and controls

Tyre Pressure Unit:

The unit for tire pressure that displays in the

vehicle information display can be changed to:

kPa

bar

psi

Kgf/cm2

Use the

button

and the OK button

select and change the unit.

If necessary, refer to the following table to

JVI0938X

convert between units.

Units (if equipped)

Calibrate:

The units that are shown in the vehicle

The tire pressure is affected by the tempera-

ture of the tire; the tire temperature increases

when the car is driven. To be able to accurately

monitor the tire air leakage and to prevent false

TPMS warnings due to changes in temperature,

the TPMS system uses temperature sensors in

the tires to perform temperature compensa-

tion calculations.

On rare occasions it may be necessary to

recalibrate the TPMS system reference tem-

perature. This operation should only be per-

formed when the actual tire pressure has been

adjusted, while the current ambient tempera-

ture is significantly different to the current

calibration temperature. (See “Tire Pressure

Monitoring System (TPMS)” (P.5-9).)

information display can be changed:

Distance/Fuel

Tyre pressures (if equipped)

Temperature

Use the

button , and the OK button

select and change the units of the vehicle

information display.

Distance/Fuel:

The unit for the mileage that displays in the

vehicle information display can be changed to:

km, l/100km

km, km/l

miles, MPG (if equipped)

Use the

button

and the OK button

Use the

button , and the OK button

select and change the unit.

start or cancel the calibration process. While

the calibration process is active, the message:

“Resetting tyre pressure system” will be dis-

played.

Tyre pressures (if equipped):

See “Tyre Pressure Unit” (P.2-29).

Instruments and controls 2-29

Temperature:

The temperature that displays in the vehicle

information display can be changed from:

°C (Celsius)

°F (Fahrenheit)

Use the

button

to toggle choices.

Language (if equipped)

The language of the vehicle information display

can be changed.

Use the

button , and the OK button

select and change the language of the vehicle

information display. The language of the center

display/navigation can be changed indepen-

dently of the vehicle information display. For

models with Navigation System, see “Vehicle

information and settings (models with naviga-

tion system except for Thailand)” (P.4-5) or the

NissanConnect Owner’s Manual. For models

without Navigation System, see “Audio system”

(P.4-38) or the NissanConnect Owner’s Manual.

Factory Reset

The settings in the vehicle information display

can be reset back to the factory default. To

reset the vehicle information display:

1. Select “Factory Reset” using the

button

and press the OK button

2. Select “YES” to return all settings back to

default by pressing the OK button

2-30 Instruments and controls

Instruments and controls -> Vehicle information display for Your Nissan X Trail SUV 2020

Popular Manuals