Get Maintenance and do-it-yourself -> Lights Guide for Nissan X Trail SUV 2020

LIGHTS

2. Be sure the headlight switch is in the “OFF”

position.

3. Remove the fuse box cover.

Low-beam:

HEADLIGHTS

LED headlight bulb

If replacement is required, contact a NISSAN

dealer.

4. Pinch the locking tabs

found on each

side of the extended storage fuse switch.

5. Pull the extended storage fuse switch

Halogen headlight bulb

straight out from the fuse box

The halogen headlight is a semi-sealed beam

type which uses replaceable headlight (halo-

gen) bulbs. They can be replaced from inside

the engine compartment without removing the

headlight assembly.

How to remove the extended storage fuse

switch:

1. To remove the extended storage fuse

switch, be sure the ignition switch is in the

“OFF” or “LOCK” position.

CAUTION:

2. Be sure the headlight switch is in the “OFF”

position.

High-pressure halogen gas is sealed inside

the bulb. The bulb may break if the glass

envelope is scratched or the bulb is dropped.

3. Remove the fuse box cover.

4. Pinch the locking tabs

found on each

side of the extended storage fuse switch.

5. Pull the extended storage fuse switch

straight out from the fuse box

JVM0395X

Disconnect the battery negative cable.

Disconnect the electrical connector

from the rear end of the bulb.

Remove the headlight bulb by turning it

counter clockwise. Do not shake or rotate

the bulb when removing it.

Install the new bulb in the reverse order of

removal.

8-36 Maintenance and do-it-yourself

High-beam:

EXTERIOR LIGHTS

CAUTION:

Item

Wattage (W)

When handling the bulb, do not touch the

glass envelope.

Front turn signal light

LED

Front clearance light/Day-

Use the same number and wattage as

time running light*

originally installed:

Front fog light (if equipped)

Side turn signal light*

Rear combination light

Turn signal

Stop

Tail light*

Reverse light

Rear fog light (if equipped)

High-mounted stop light*

License plate light

LED

Halogen headlight model

High beam bulb: 65W (H9)

Low beam bulb: 55W (H11)

LED

Do not leave the bulb out of the headlight

reflector for a long period of time as dust,

moisture and smoke may enter the head-

light body and affect the performance of

the headlight.

Aiming adjustment is not necessary if only the

bulbs are replaced. When aiming adjustment is

necessary, contact a NISSAN dealer.

Fog may temporarily form inside the lens of the

exterior lights in the rain or in a car wash. A

temperature difference between the inside and

the outside of the lens causes the fog. This is

*: See a NISSAN dealer for replacement.

not

a malfunction. If large drops of water

collect inside the lens, contact a NISSAN dealer.

JVM0396X

Disconnect the battery negative cable.

Turn the cover

counter clockwise and

remove the cover.

Disconnect the electrical connector

from the rear end of the bulb.

Remove the headlight bulb by turning it

counter clockwise. Do not shake or rotate

the bulb when removing it.

Install the new bulb in the reverse order of

removal.

Maintenance and do-it-yourself 8-37

INTERIOR LIGHTS

LIGHT LOCATIONS

Wattage (W)

Item

LED

1.8

LED

Map lights

Vanity mirror light

Console light

Room light (if equipped)

Rear personal light (if

equipped)

Luggage room light

1.4

Glove box light (if equipped)

WAI0035X

8-38 Maintenance and do-it-yourself

Clearance light/Daytime running light

Headlight (high-beam)

Headlight (low-beam)

Front map light

Room light (if equipped)

Side turn signal light

Front turn signal light

Front fog light (if equipped)

High-mounted stop light

REMOVE

INSTALL

Replacement procedures

All other lights are either type A, B, C, D, E or F.

When replacing a bulb, first remove the lens

and/or cover.

10. Luggage room light (if equipped)

11.

Rear combination light (tail light, stop

light, rear turn signal light)

12. Rear personal light (if equipped)

13. Rear fog light (if equipped)

14. License plate light

15. Reverse light/Tail light

JVM0397X

Front turn signal light

SDI1679

Maintenance and do-it-yourself 8-39

JVM0417X

JVM0769X

JVM0770X

Front fog light

Rear combination light

Reverse light

8-40 Maintenance and do-it-yourself

SDI1499A

Room light (if equipped)

JVM0420X

SDI2031

Rear fog light (if equipped)

Rear personal light (if equipped)

JVM0419X

License plate light

SDI1839

Vanity mirror light

Maintenance and do-it-yourself 8-41

JVM0426X

JVM0393X

Luggage room light

Left-Hand Drive (LHD) model

LEGAL REQUIREMENT TO ADJUST

HEADLIGHT BEAM

When the vehicle is driven in a country where

the driving lane is different to your home

country, affix an opaque sticker on the head-

light.

8-42 Maintenance and do-it-yourself

NOTE:

Align the mark

with the center mark

of the headlight bulb.

JVM0394X

Right-Hand Drive (RHD) model

1. Place the ignition switch in the “OFF”

NOTE:

position and wait until the headlights cool

down.

Use an opaque material that prevents

the light from passing through it.

2. Prepare the stickers referring to the figure.

Note that other transparent materials

Make the stickers

that will be affixed to

do not work effectively.

the surface of the right side headlight and

the left side headlight.

3. Affix the sticker by aligning the corner

the sticker with the position of the mark

that is located on the surface of the head-

light seen from front.

Affix the sticker as illustrated by aligning

the mark

with dividing lines

and

Maintenance and do-it-yourself 8-43

Maintenance and do-it-yourself -> Lights for Your Nissan X Trail SUV 2020

Popular Manuals