AdBlue® FILLER LID AND CAP (if
equipped for diesel engine model)
The AdBlue® filler cap is located behind the
shared fuel/AdBlue® filler lid. For more details
about AdBlue®, see “AdBlue® Selective Catalytic
Reduction (SCR) system (if equipped for diesel
engine model)” (P.5-5).
LOOSE FUEL CAP warning (if equipped)
Malfunction Indicator Light (MIL)
For Korea:
If the Malfunction Indicator Light (MIL) illumi-
nates while the engine is running, it may
indicate that the fuel-filler cap is loose or
missing, or that the fuel level is low. Make sure
that the fuel-filler cap is installed and closed
tightly, and that a sufficient amount of fuel
remains in the fuel tank. (See “Malfunction
Indicator Light (MIL)” (P.2-20).)
OPENING AdBlue® FILLER LID
JVP0503X
The LOOSE FUEL CAP warning message is
displayed on the vehicle information display
when the fuel-filler cap is not tightened cor-
rectly after the vehicle has been refueled. It may
take a few driving trips for the message to be
displayed.
SPA2336
To open the AdBlue® filler lid, pull the fuel-filler
lid release handle.
To turn off the warning message, do the
following procedure:
1. Remove and install the fuel-filler cap as
soon as possible. (See “Fuel-filler cap” (P.3-
32).)
2. Tighten the fuel-filler cap until a single click
is heard.
3. Push the OK
button on the steering
wheel for about 1 second to turn off the
LOOSE FUEL CAP warning message
tightening the fuel-filler cap.
after
Pre-driving checks and adjustments 3-33
