Get Pre-driving checks and adjustments -> Automatic drive positioner Guide for Nissan X Trail SUV 2020

AUTOMATIC DRIVE POSITIONER (if

equipped)

The automatic drive positioner system has the

following features:

Parking

Automatic brake hold function display

For Continuously Variable Transmission

The automatic brake hold function status can

be checked in the “Chassis Control” mode in the

vehicle information display. See “12. Chassis

control” (P.2-43).

Entry/exit function

Memory storage

(CVT)/Dual Clutch Transmission (DCT) model:

When the shift lever is in the “P” (Park) position

with the brake force is maintained by auto-

matic brake hold function, the parking brake

will automatically be applied and the brake

force of the automatic brake hold will be

released. The automatic brake hold indicator

turns off. When the parking brake is applied

with the brake force is maintained by auto-

matic brake hold function, the brake force of

the automatic brake hold will be released. The

automatic brake hold indicator turns off.

ENTRY/EXIT FUNCTION

Also, depending on the driving situations, some

warnings or indicators may be displayed in the

vehicle information display. See “Vehicle infor-

mation display warnings and indicators” (P.2-

31).

This system is designed so that the driver’s seat

will automatically move when the shift lever is

in the “P” (Park) position. This allows the driver

to get into and out of the driver’s seat more

easily.

The driver’s seat will slide backward when the

driver’s door is opened with the ignition switch

placed in the “OFF” position or when the

ignition switch is changed from “ON” to “OFF”

with the driver’s door open.

The driver’s seat will return to the previous

position when the ignition switch is turned to

“ON” while the shift lever is in the “P” (Park)

position.

For Manual Transmission model:

When the parking brake is applied with the

brake force is maintained by automatic brake

hold function, the brake force of the automatic

brake hold will be released. The automatic

brake hold indicator turns off.

Activating or canceling entry/exit

function

NOTE:

Under the following conditions, the park-

ing brake will automatically be applied

and the brake force of the automatic

brake hold will be released.

All the following conditions must be met before

activating or canceling the entry/exit function.

The ignition switch is placed in the “OFF”

position.

— The braking force is applied by the

automatic brake hold function for 3

minutes or longer.

— The driver’s seat belt is unfastened.

— The ignition switch is placed in the

The entry/exit function is not in operation.

The following switches are not operated.

— Seat memory switches

— Power seat switches

“OFF” position

— Outside rearview mirror remote control

— If a malfunction occurs in the auto-

switch

matic brake hold function

The entry/exit function can be activated or

canceled by pressing and holding the SET

switch for more than 10 seconds.

When the vehicle stops, but the brake

force is not automatically applied, de-

press the brake pedal firmly until the

automatic brake hold indicator (green)

illuminates.

3-44 Pre-driving checks and adjustments

5 seconds.

Display settings:

Linking Intelligent Key to a stored

memory position

The entry/exit function can also be activated or

canceled if the "Exit Seat Slide" key is turned to

ON or OFF in the "Vehicle Settings" menu on

the vehicle information display.(See “Vehicle

Settings” (P.2-25).)

SYSTEM OPERATION

The automatic drive positioner system will not

work or will stop operating under the following

conditions:

The Intelligent Key can be linked to a stored

memory position with the following procedure.

1. Follow the steps for storing

position.

a memory

When the vehicle speed is above 7 km/h (4

MEMORY STORAGE

2. While the indicator light for the memory

MPH).

switch being set is illuminated for 5 sec-

When any of the memory switches are

pushed while the automatic drive posi-

tioner is operating.

onds, push the

button on the Intelli-

gent Key. If the indicator light blinks, the

Intelligent Key is linked to that memory

setting.

When the switch for the driver’s seat is

pushed while the automatic drive posi-

tioner is operating.

Place the ignition switch in the “OFF” position

and push the “UNLOCK”

button on the

When the seat has already been moved to

Intelligent Key. The driver’s seat and outside

mirrors will move to the memorized position or

to the exit position when the entry/exit func-

tion is set to active.

the memorized position.

When no seat position is stored in the

memory switch.

When the shift lever is moved from “P”

WAD0032X

(Park) to any other position.

Confirming memory storage

Two positions for the driver’s seat and outside

mirrors can be stored in the automatic drive

positioner memory. Follow these procedures to

use the memory system.

1. Adjust the driver’s seat and outside mirrors

to the desired positions by manually oper-

ating each adjusting switch. For additional

information, see “Seats” (P.1-2) and “Outside

rearview mirrors” (P.3-38).

Push the SET switch.

If a memory position has not been stored in

the switch (1 or 2) the indicator light for the

respective switch will come ON for approxi-

mately 0.5 seconds.

If a memory position has been stored in the

switch (1 or 2) then the indicator light for

the respective switch will stay ON for

approximately 5 seconds.

2. Push the SET switch and, within 5 seconds,

Selecting memorized position

push the memory switch (1 or 2).

1. Move the shift lever to the P (Park) position.

3. The indicator light for the pushed memory

switch will come on and stay on for

approximately 5 seconds.

2. Push the memory switch (1 or 2) fully for at

least 1 second.

The driver’s seat and outside rearview

mirrors will move to the memorized posi-

tion with the indicator light flashing, and

then the light will stay on for approximately

4. The chime will sound if the memory has

been stored.

If memory is stored in the same memory

switch, the previous memory will be deleted.

Pre-driving checks and adjustments 3-45

MEMO

3-46 Pre-driving checks and adjustments

Pre-driving checks and adjustments -> Automatic drive positioner for Your Nissan X Trail SUV 2020

Popular Manuals