FUEL-FILLER LID
Put the fuel-filler cap on the cap holder while
refueling.
Opener switch type
WARNING:
Except for Korea
.
Fuel is extremely flammable and highly
explosive under certain conditions. You
could be burned or seriously injured if it is
misused or mishandled. Always stop the
engine and do not smoke or allow open
flames or sparks near the vehicle when
refueling.
Fuel may be under pressure. Turn the cap
a half of a turn, and wait for any “hissing”
sound to stop to prevent fuel from
spraying out and possibly causing perso-
nal injury. Then remove the cap.
Use only an original equipment type fuel-
filler cap as a replacement. It has a built-
in safety valve needed for proper opera-
tion of the fuel system and emission
control system. An incorrect cap can
result in a serious malfunction and pos-
sible injury.
The fuel-filler cap is a ratcheting type. Turn the
cap counterclockwise to remove. Tighten the
cap clockwise
until ratchet clicks, more than
twice, after refueling.
For Korea
Turn the fuel-filler cap counterclockwise
to
.
.
remove. To tighten, turn the fuel-filler cap
clockwise
until a single click is heard.
WAD0034X
Type B
The fuel-filler lid opener switch is located on the
instrument panel. To open, push the fuel-filler
lid opener switch. To lock, close the fuel-filler lid
securely.
FUEL-FILLER CAP
CAUTION:
OPENING FUEL-FILLER LID
Release handle type
If fuel is spilled on the vehicle body, flush it
away with water to avoid paint damage.
WAD0035X
Type A
The fuel-filler cap is a ratcheting type. Turn the
cap counterclockwise to remove. Tighten the
cap clockwise
until ratchet clicks, more than
twice, after refueling.
Put the fuel-filler cap on the cap holder while
refueling.
SPA2336
SPA2800
To open the fuel-filler lid, pull the fuel-filler lid
release handle.
3-32 Pre-driving checks and adjustments
