Get Safety ? seats, seat belts and supplemental -> Seats Guide for Nissan X Trail SUV 2020

SEATS

Manual seat adjustment

WARNING:

After adjusting a seat, gently shake the seat

to confirm that the seat is locked securely. If

the seat is not locked securely, it may move

suddenly and could cause the loss of control

of the vehicle.

SSS0133A

tance of others or pets unattended in

your vehicle. Additionally, the tempera-

ture inside a closed vehicle on a warm

day can quickly become high enough to

cause a significant risk of injury or death

to people and pets.

WARNING:

Do not drive and/or ride in the vehicle

with the seatback reclined. This can be

dangerous. The shoulder belt will not be

properly against the body. In an accident,

you and your passengers could be

thrown into the shoulder belt and receive

neck or other serious injuries. You and

your passengers could also slide under

the lap belt and receive serious injuries.

For the most effective protection while

the vehicle is in motion, the seatback

should be upright. Always sit well back

and upright in the seat and adjust the

seat belt properly. (See “Seat belts” (P.1-

10).)

Do not leave children unattended inside

the vehicle. They could unknowingly acti-

vate switches or controls. Unattended

children could become involved in ser-

ious accidents.

To help avoid risk of injury or death

through unintended operation of the

vehicle and/or its systems, do not leave

children, people who require the assis-

CAUTION:

When adjusting the seat positions, be sure

not to contact any moving parts to avoid

possible injuries and/or damages.

FRONT SEATS

WARNING:

Do not adjust the driver’s seat while driving

so that full attention may be given to vehicle

operation.

1-2 Safety — seats, seat belts and supplemental restraint system

Lumbar support (if equipped):

JVR0332X

SSS0684

Forward and backward:

Seat lifter (if equipped):

1. Pull up the adjusting lever

2. Slide the seat to the desired position.

The lumbar support feature provides lower

back support to the driver.

Move the lever up or down to adjust the seat

3. Release the adjusting lever to lock the seat

lumbar area.

in position.

Reclining:

1. Pull up the adjusting lever

2. Tilt the seatback to the desired position.

3. Release the adjusting lever to lock the

seatback in position.

JVR0333X

The reclining feature allows the adjustment of

the seatback for occupants of different sizes to

help obtain the proper seat belt fit. (See “Seat

belts” (P.1-10).)

Pull up or push down the adjusting lever to

adjust the seat height until the desired position

is achieved.

The seatback may be reclined to allow occu-

pants to rest when the vehicle is parked.

Safety — seats, seat belts and supplemental restraint system 1-3

Power seat adjustment

Operating tips:

The power seat motor has an auto-reset

overload protection circuit. If the motor

stops during the seat adjustment, wait 30

seconds, then reactivate the switch.

To avoid discharge of the battery, do not

operate the power seats for a long period

of time when the engine is not running.

For automatic drive positioner operation (if

equipped), see “Automatic drive positioner”

(P.3-44).

JVR0334X

Forward and backward:

Seat lifter (if equipped):

Move forward or backward the adjusting

switch

to the desired position.

Reclining:

Move forward or backward the adjusting

switch to the desired position.

The reclining feature allows the adjustment of

the seatback for occupants of different sizes to

help obtain the proper seat belt fit. (See “Seat

belts” (P.1-10).)

The seatback may be reclined to allow occu-

JVR0119X

pants to rest when the vehicle is parked.

Pull up or push down the adjusting switch to

adjust the seat height until the desired position

is achieved.

1-4 Safety — seats, seat belts and supplemental restraint system

1. Start the engine.

2. Select heat range.

When cleaning the seat, never use gaso-

line, thinner, or any similar materials.

If any malfunctions are found or the

heated seat does not operate, turn the

switch off and have the system checked

by a NISSAN dealer.

Lumbar support (if equipped):

For high heat, push the HI (High) side of

the switch

For low heat, push the LO (Low) side of

the switch

The indicator light will illuminate when

SECOND ROW SEATS

Adjustment

low or high is selected.

3. To turn off the heater, return the switch to

the level position. Make sure the indicator

light turns off.

The heater is controlled by a thermostat,

automatically turning the heater on and off.

The indicator light will remain on as long as

the switch is on.

When the vehicle’s interior is warmed, or

before you leave the vehicle, be sure to turn

off the switch.

SSS1053

The lumbar support feature provides lower

back support to the driver.

Push each side of the adjusting switch to adjust

the seat lumbar area until the desired position

is achieved.

Heated seats (if equipped)

CAUTION:

JVR0330X

The battery could run down if the seat

heater is operated while the engine is not

running.

Forward and backward (if equipped):

1. Pull up the adjusting lever

Do not use the seat heater for extended

2. Slide the seat to the desired position.

periods or when no one is using the seat.

3. Release the adjusting lever

seat in position.

to lock the

Do not put anything on the seat which

insulates heat, such as a blanket, cushion,

seat cover, etc. Otherwise, the seat may

become overheated.

Reclining (if equipped):

1. Pull the adjusting lever

Do not place anything hard or heavy on

the seat or pierce it with a pin or similar

object. This may result in damage to the

seat heater.

Any liquid spilled on the heated seat

should be removed immediately with a

dry cloth.

2. Tilt the seatback to the desired position.

JVR0322X

3. Release the adjusting lever

seatback in position.

to lock the

The front seats can be warmed by built-in

heaters. The switches located on the center

console can be operated independently of each

other.

The reclining feature allows the adjustment of

the seatback for occupants of different sizes to

help obtain the proper seat belt fit. (See “Seat

belts” (P.1-10).)

Safety — seats, seat belts and supplemental restraint system 1-5

The seatback may be reclined to allow occu-

pants to rest when the vehicle is parked.

Properly secure all luggage to help pre-

vent it from sliding or shifting. Do not

place luggage higher than the seatbacks.

When returning the seatbacks to the

upright position, be certain they are

completely secured in the latched posi-

tion. If they are not completely secured,

passengers may be injured in an accident

or sudden stop.

Do not operate the walk-in mechanism

with objects, drinks, etc. on the seat. This

may cause objects to break or cause the

passenger room to be soiled.

Walk-in mechanism (Three row model):

The second row seats can tilt and slide for easy

entry/exit to/from the third row seats.

JVR0449X

WARNING:

Folding:

After operating the walk-in mechanism, be

sure to return the seat to the rearmost

position and then tilt up the seatback until

it latches.

1. For vehicles not equipped with third row

seat: Pull up the lever

seatback flat.

and fold the

For vehicles equipped with third row seat:

Pull up the lever

and pull the strap

CAUTION:

the lower side of the outboard seats to fold

the seatback flat.

When operating the walk-in mechanism,

push and hold the seatback and operate

slowly. If the seatback is tilted down

quickly and then allowed to slide, there

is a risk that it could contact your face or

other parts of your body, or pinch your

hand or foot, causing injury.

2. To return the seats to a seating position,

push up on the seatback until it latches in

place.

WARNING:

Never allow anyone to ride in the luggage

area or on the rear seats when they are in

the fold-down position. Use of these

areas by passengers without proper re-

straints could result in serious injury in an

accident or sudden stop.

JVR0355X

When operating the walk-in mechanism,

be sure not to contact any moving parts

to avoid possible injuries and/or damage.

When operating the walk-in mechanism,

be sure that the second row seats are not

occupied by passengers and/or any ob-

jects to avoid possible injuries and/or

damage.

1. Pull the lever

to tilt down the seatback.

2. Slide the seat forward.

Do not fold down the second row seats

when occupants are in the second row

seat area or any luggage is on the second

row seats.

3. When returning the seat to its original

position, tilt the seatback up, slide the seat

backward and then secure it in place.

1-6 Safety — seats, seat belts and supplemental restraint system

Heated seats (if equipped)

THIRD ROW SEATS (if equipped)

Folding

CAUTION:

The battery could run down if the seat

heater is operated while the engine is not

running.

Do not use the seat heater for extended

periods or when no one is using the seat.

Do not put anything on the seat which

insulates heat, such as a blanket, cushion,

seat cover, etc. Otherwise, the seat may

become overheated.

Do not place anything hard or heavy on

the seat or pierce it with a pin or similar

object. This may result in damage to the

seat heater.

Any liquid spilled on the heated seat

should be removed immediately with a

dry cloth.

JVR0525X

The seats can be warmed by built-in heaters.

The switch is located on the center console.

JVR0329X

To fold the third row seats flat for maximum

cargo capacity:

1. Make sure the head restraints are all the

1. Start the engine.

2. Select heat range.

For high heat, push the HI (High) side of

way down.

2. Pull the strap

When cleaning the seat, never use gaso-

the switch

line, thinner, or any similar materials.

to release the seat.

3. Once released, push the seatback forward

For low heat, push the LO (Low) side of

If any malfunctions are found or the

heated seat does not operate, turn the

switch off and have the system checked

by a NISSAN dealer.

the switch

The indicator light will illuminate when

To return the third row seats to a seating

position:

the heater is on.

3. To turn off the heater, return the switch to

the level position. Make sure the indicator

light turns off.

Use the pull straps

to raise each seatback.

Pull back until the seatback latches into posi-

tion. Make sure to properly raise each seatback

to an upright and secured position.

The heater is controlled by a thermostat,

automatically turning the heater on and off.

The indicator light will remain on as long as

the switch is on.

WARNING:

When the seat is returned to the normal

seating position, the head restraints must be

returned to the upright position to properly

protect vehicle occupants.

When the vehicle’s interior is warmed, or

before you leave the vehicle, be sure to turn

off the switch.

Safety — seats, seat belts and supplemental restraint system 1-7

Safety ? seats, seat belts and supplemental -> Seats for Your Nissan X Trail SUV 2020

Popular Manuals