Starting and driving -> Care when driving for Your Nissan X Trail SUV 2020

IGNITION SWITCH (model without  
Intelligent Key system)  
CARE WHEN DRIVING  
Driving your vehicle to fit the circumstances is  
essential for your safety and comfort. As a  
driver, you should be the one who knows best  
how to drive in the given circumstances.  
DRIVING IN WINTER CONDITIONS  
WARNING:  
.
.
.
Drive cautiously.  
Never remove the key or place the ignition  
switch in the “LOCK” position while driving.  
The steering wheel will lock and could cause  
the driver to lose control of the vehicle. This  
could result in serious vehicle damage or  
personal injury.  
Avoid accelerating or stopping suddenly.  
Avoid sharp turning or lane changing  
ENGINE COLD START PERIOD  
suddenly.  
.
.
Avoid sudden steering.  
Due to the higher engine speeds, when the  
engine is cold, extra caution must be exercised  
when selecting a gear during the engine warm-  
up period after starting the engine.  
Avoid following too close to the vehicle in  
front.  
CONTINUOUSLY VARIABLE TRANSMIS-  
SION (CVT)/DUAL CLUTCH TRANSMIS-  
SION (DCT)  
LOADING LUGGAGE  
Loads and their distribution and the attach-  
ment of equipment (coupling devices, roof  
luggage carriers, etc.) will considerably change  
the driving characteristics of the vehicle. Your  
driving style and speed must be adjusted  
according to the circumstances.  
DRIVING IN WET CONDITIONS  
.
.
Avoid accelerating or stopping suddenly.  
Avoid sharp turning or lane changing  
suddenly.  
.
Avoid following too close to the vehicle in  
front.  
JVS0409X  
When water covers the road surface with water  
puddles, small water streams, etc., reduce  
speed to prevent hydroplaning which can  
cause skidding and loss of control. Worn tires  
will increase this risk.  
The ignition lock is designed so that the  
ignition switch cannot be turned to the “LOCK”  
position until the shift lever is moved to the “P”  
(Park) position. When moving the ignition  
switch to the “LOCK” position, to remove the  
key from the ignition switch, make sure the  
shift lever is in the “P” (Park) position.  
When the ignition switch cannot be turned to  
the “LOCK” position:  
1. Move the shift lever to the “P” (Park)  
position.  
2. Turn the ignition switch slightly in the “ON”  
direction.  
5-12 Starting and driving