Starting and driving -> Ignition switch for Your Nissan X Trail SUV 2020

IGNITION SWITCH (model without  
Intelligent Key system)  
CARE WHEN DRIVING  
Driving your vehicle to fit the circumstances is  
essential for your safety and comfort. As a  
driver, you should be the one who knows best  
how to drive in the given circumstances.  
DRIVING IN WINTER CONDITIONS  
WARNING:  
.
.
.
Drive cautiously.  
Never remove the key or place the ignition  
switch in the “LOCK” position while driving.  
The steering wheel will lock and could cause  
the driver to lose control of the vehicle. This  
could result in serious vehicle damage or  
personal injury.  
Avoid accelerating or stopping suddenly.  
Avoid sharp turning or lane changing  
ENGINE COLD START PERIOD  
suddenly.  
.
.
Avoid sudden steering.  
Due to the higher engine speeds, when the  
engine is cold, extra caution must be exercised  
when selecting a gear during the engine warm-  
up period after starting the engine.  
Avoid following too close to the vehicle in  
front.  
CONTINUOUSLY VARIABLE TRANSMIS-  
SION (CVT)/DUAL CLUTCH TRANSMIS-  
SION (DCT)  
LOADING LUGGAGE  
Loads and their distribution and the attach-  
ment of equipment (coupling devices, roof  
luggage carriers, etc.) will considerably change  
the driving characteristics of the vehicle. Your  
driving style and speed must be adjusted  
according to the circumstances.  
DRIVING IN WET CONDITIONS  
.
.
Avoid accelerating or stopping suddenly.  
Avoid sharp turning or lane changing  
suddenly.  
.
Avoid following too close to the vehicle in  
front.  
JVS0409X  
When water covers the road surface with water  
puddles, small water streams, etc., reduce  
speed to prevent hydroplaning which can  
cause skidding and loss of control. Worn tires  
will increase this risk.  
The ignition lock is designed so that the  
ignition switch cannot be turned to the “LOCK”  
position until the shift lever is moved to the “P”  
(Park) position. When moving the ignition  
switch to the “LOCK” position, to remove the  
key from the ignition switch, make sure the  
shift lever is in the “P” (Park) position.  
When the ignition switch cannot be turned to  
the “LOCK” position:  
1. Move the shift lever to the “P” (Park)  
position.  
2. Turn the ignition switch slightly in the “ON”  
direction.  
5-12 Starting and driving  
3. Place the ignition switch in the “LOCK”  
position.  
4. Remove the key.  
If the ignition switch is turned to the “LOCK”  
position, the shift lever cannot be moved from  
the “P” (Park) position. The shift lever can be  
moved if the ignition switch is in the “ON”  
position with the foot brake pedal depressed.  
The “OFF” position is between the “LOCK” and  
“ON” positions, although it is not marked on the  
ignition switch.  
ignition switch.  
ON (2)  
The ignition system and the electrical acces-  
sory power activate without the engine turned  
on.  
STEERING LOCK (if equipped)  
To lock steering wheel  
1. Place the ignition switch in the “LOCK”  
START (3)  
position.  
The engine starter activates and the engine will  
start. The ignition switch, when released, will  
automatically turn to the “ON” position.  
2. Remove the key, if it is inserted in the  
ignition switch.  
3. Turn the steering wheel 1/6 of  
a turn  
clockwise from the straight up position.  
CAUTION:  
To unlock steering wheel  
1. Insert the key into the ignition switch.  
As soon as the engine has started, release  
the ignition switch immediately.  
MANUAL TRANSMISSION (MT)  
2. Gently turn the ignition switch while rotat-  
ing the steering wheel slightly right and left.  
KEY POSITIONS  
LOCK (OFF)/LOCK (ACC) (0)  
.
.
.
The ignition key can only be removed at  
this position.  
The steering lock (if equipped) can only be  
locked at this position.  
The electrical accessory power activates  
without the engine turned on. (ACC posi-  
tion)  
JVS0409X  
The ignition switch includes a device that helps  
prevent accidental removal of the key while  
driving.  
OFF/OFF(ACC) (1)  
.
The engine is turned off with the steering  
The key can only be removed when the ignition  
wheel unlocked.  
switch is in the “LOCK” position.  
.
The electrical accessory power activates  
without the engine turned on. (ACC posi-  
tion)  
1. Turn the ignition switch slightly in the “ON”  
direction.  
2. Place the ignition switch in the “LOCK”  
position.  
3. Remove the key.  
The “OFF” position is between the “LOCK” and  
“ON” positions, although it is not marked on the  
Starting and driving 5-13