Get Access -> Remote control / Key Guide for Peugeot 208 4 Door 2020

Access

Integral key

The key built into the remote control can be

used for the following operations, depending on

version:

Remote control / Key

Remote control function

– Unlocking/Locking/Deadlocking the vehicle.

– Activation/Deactivation of the manual child

lock.

– Activation/Deactivation of the front passenger

airbag.

– Back-up Unlocking/Locking of the doors.

– Switching on the ignition and starting/switching

oﬀ the engine.

► To eject the key or put it back in place, pull

and hold the button.

The remote control can be used for the following

remote functions, depending on version:

– Unlocking / Locking / Deadlocking the vehicle.

– Unlocking / Locking the boot.

Without Keyless Entry and Starting

Unlocking the vehicle

– Remote operation of lighting.

Selective unlocking (driver’s door,

boot) is conﬁgured in the

Driving/Vehicle touch screen menu.

– Folding / Unfolding the door mirrors.

– Activating / Deactivating the alarm.

– Locating the vehicle.

– Opening / Closing the windows.

Complete unlocking

► Press the unlocking button.

– Activating the vehicle’s electronic immobiliser.

Back-up procedures allow the vehicle to be

locked / unlocked in the event of a failure of the

remote control, the central locking, the battery,

etc. For more information on the Back-up

procedures, please refer to the corresponding

section.

Selective unlocking

Driver’s door and fuel/charging ﬂap

► Press the unlocking button.

► Press it again to unlock the other doors and

the boot.

► To unfold or fold the key, press the button.

With Keyless Entry and Starting

Complete or selective unlocking and alarm

deactivation is conﬁrmed by the ﬂashing of the

sidelamps and/or daytime running lamps.

Depending on version, the door mirrors unfold.

Access

Opening the windows

Depending on version, holding the

unlocking button pressed for more than 3

seconds opens the windows.

will automatically lock itself again after about

30 seconds. If the vehicle is ﬁtted with an

alarm, it will also be reactivated automatically.

Locating the vehicle

This function helps you to spot your vehicle from

a distance, with the vehicle locked:

– The direction indicators or sidelamps and/or

daytime running lamps, depending on version,

ﬂash for approximately 10 seconds.

– The door mirror spotlamps come on.

– The courtesy lamps come on.

The windows stop when the button is released.

Deadlocking

Selective unlocking of the boot

When selective unlocking of the boot is

activated :

► Press the locking button again within

3 seconds to deadlock the vehicle (conﬁrmed by

the temporary lighting of the direction indicators).

► Press this button.

► Press this button to unlock the boot.

The doors remain locked.

If selective unlocking of the boot is deactivated,

pressing this button also unlocks the doors.

Remote lighting of the

lamps

Availability of this function depends on version.

► Press this button. The sidelamps,

dipped beam headlamps, number plate

lamps and door mirror spotlamps come on for 30

seconds.

Deadlocking renders the interior door

controls inoperative. It also deactivates

the central locking button.

The horn remains operational.

Never leave anyone inside the vehicle

when it is deadlocked.

Do not forget to lock the boot again by

pressing the locking button.

Locking the vehicle

Closing the windows

Pressing again before the end of the timed

period switches oﬀ the lamps immediately.

Holding the locking button pressed for

more than 3 seconds closes the windows.

Normal locking

► Press the locking button.

Locking and alarm activation is conﬁrmed by the

lighting of the direction indicators.

Depending on version, the door mirrors fold.

When closing the windows, ensure that

no person or object could prevent their

correct closure.

To leave the windows partly open on versions

with alarm, you must ﬁrst deactivate the

interior volumetric alarm protection.

For more information on the Alarm, refer to

the corresponding section.

Advice

Remote control

The remote control is a sensitive, high-

frequency device; avoid handling it in your

pocket, due to the risk of unintentionally

unlocking the vehicle.

Avoid pressing the remote control buttons

while out of range of the vehicle, due to

the risk of rendering the remote control

An access (door or boot) that is not

properly closed prevents locking of the

vehicle. However, if the vehicle is ﬁtted with

an alarm, it will be activated after 45 seconds.

If the vehicle is unlocked but the doors or boot

are not subsequently opened, the vehicle

Access

inoperative. It would then be necessary to

reset it.

The remote control does not work when the

key is in the ignition switch, even when the

ignition is switched oﬀ.

The automatic functions are conﬁgured

via the Driving / Vehicle touch screen

Proximity Keyless Entry

and Start

This Keyless Entry and Starting system enables

automatic vehicle locking/unlocking simply by

detection of the electronic key.

menu.

Unlocking the vehicle

Anti-theft protection

As long as the driver has the electronic key

on their person, the vehicle unlocks as they

approach and locks when they walk away.

Key recognition zones:

Do not modify the electronic vehicle

immobiliser, as this might result in

malfunctions.

For vehicles with a key ignition switch,

remember to remove the key and turn the

steering wheel to engage the steering lock.

Selective unlocking (driver’s door, boot) is

conﬁgured in the Driving/Vehicle touch

screen menu.

Locking the vehicle

Driving with the doors locked could make

it more diﬃcult for the emergency services to

enter the vehicle in an emergency.

As a safety precaution, remove the key from

the ignition or take the electronic key with you

when leaving the vehicle, even for a short

time.

Selective unlocking is deactivated by default.

Complete unlocking

The vehicle (doors and boot) unlocks:

► Either automatically as the driver approaches

in zone C, if the automatic functions are

activated.

► Or by gently pressing the driver's door handle

or boot button.

Unlocking and alarm deactivation is conﬁrmed

by the ﬂashing of the sidelamps and/or daytime

running lamps.

Zone A: welcome lighting on approaching

the vehicle (between 3 and 5 metres from the

vehicle).

Zone B: automatic locking on leaving the vehicle

(about 2 metres from the vehicle).

Zone C: automatic unlocking and welcome

lighting on approaching the vehicle (between 1

and 2 metres from the vehicle).

Purchasing a second-hand vehicle

Have the key codes memorised by a

PEUGEOT dealer, to ensure that the keys

in your possession are the only ones able to

start the vehicle.

Depending on version, the door mirrors unfold.

For more information on Welcome lighting,

please refer to the corresponding section.

If the electronic key remains in zone B

for more than 15 minutes without any

action on the vehicle doors, the automatic

Access -> Remote control / Key for Your Peugeot 208 4 Door 2020

Related Topics

Instruments

Access

Ease of use and comfort

Lighting and visibility

Safety

Driving

Practical information

In the event of a breakdown

Technical data

Touch screen bluetooth audio system

PEUGEOT Connect Radio

PEUGEOT Connect Nav