Driving -> Active Blind Spot Monitoring System for Your Peugeot 208 4 Door 2020

Driving  
Take care not to cover the warning zone in  
the door mirrors or the detection zones on the  
front and rear bumpers with adhesive labels  
or other objects; they may hamper correct  
operation of the system.  
Active Safety Brake  
with Distance Alert and  
Intelligent emergency  
braking assistance  
Refer to the General recommendations on the  
use of driving and manoeuvring aids.  
Active Blind Spot  
Monitoring System  
The vehicle has a multifunctional camera located  
at the top of the windscreen and, depending on  
version, a radar located in the front bumper.  
In addition to the fixed warning lamp in the door  
mirror on the side in question, a correction of  
trajectory will be felt if you attempt to cross  
a lane marking with the direction indicator  
activated, to help you avoid a collision.  
This system is the combination of the Active  
Lane Keeping Assistance and Blind Spot  
Monitoring System.  
These two functions must be activated and in  
operation.  
The speed of the vehicle must be between 40  
and 87 mph (65 and 140 km/h).  
These functions are especially suitable for  
driving on motorways and main roads.  
For more information on the Active Lane  
Keeping Assistance and Blind Spot  
Monitoring System, refer to the corresponding  
sections.  
This system:  
– warns the driver that their vehicle is at risk of  
collision with the vehicle in front, a pedestrian or,  
depending on version, a cyclist.  
– reduces the vehicle's speed to avoid a  
collision or limit its severity.  
This system does not avoid the need for  
vigilance on the part of the driver.  
This system is designed to assist the driver  
and improve road safety.  
It is the driver's responsibility to continuously  
monitor the state of the traffic, observing the  
driving regulations.  
The system also takes motorcyclists and  
animals into account; however, animals  
below 0.5 m tall and objects on the road are  
not necessarily detected.  
As soon as the system detects a  
potential obstacle, it prepares the braking  
circuit in case automatic braking is needed.  
This may cause a slight noise and a slight  
sensation of deceleration.  
This system is comprised of three functions:  
– Distance Alert.  
– Intelligent emergency braking assistance.  
– Active Safety Brake (automatic emergency  
braking).  
Deactivation / Activation  
By default, the system is automatically activated  
at every engine start.  
It is set via the Driving / Vehicle  
touch screen menu.  
124