Get Ease of use and comfort -> Rear bench seat Guide for Peugeot 208 4 Door 2020

Ease of use and comfort

► Move control A to the right or to the left to

select the corresponding mirror.

► Move control B in any of the four directions

to adjust.

Demisting/Defrosting

Automatic "electrochrome" model

If the vehicle is so equipped, demisting/

defrosting of the heated door mirrors is

performed when the heated rear screen is

switched on.

► Return control A to its central position.

For more information on Rear screen

demisting/defrosting, refer to the

corresponding section.

Manual folding

The mirrors can be folded manually (parking

obstruction, narrow garage, etc.).

► Turn the mirror towards the vehicle.

Interior rear view mirror

Equipped with an anti-dazzle system, which

darkens the mirror glass and reduces the

nuisance to the driver caused by the sun,

headlamps of other vehicles, etc.

Electric folding

If the vehicle is so equipped, the mirrors can

be folded electrically from the inside, with the

vehicle parked and the ignition on:

This system automatically and progressively

transitions between day and night modes, using

a sensor that measures the light entering from

the rear of the vehicle.

Manual model

Day/night position

► Place control A in the centre

position.

► Pull control A back.

To ensure optimum visibility during your

manoeuvres, the mirror lightens

► Lock the vehicle from the outside.

automatically when reverse gear is engaged.

Electric unfolding

► From outside: unlock the vehicle.

► From inside: with the ignition on, place

control A in the central position and then pull it

rearwards.

Rear bench seat

► Pull the lever to change to the anti-dazzle

"night” position.

► Push the lever to change to the normal "day"

position.

Adjustment

► Set the mirror to the normal “day” position.

Bench seat with ﬁxed cushions and split folding

backrests (2/3-1/3) to adapt the boot load space.

The automatic door mirror folding/

unfolding function is conﬁgured via the

Driving / Vehicle touch screen menu.

Ease of use and comfort

► Press the lug A to release the head restraint

and push it down.

Rear head restraints

Never drive with passengers seated at

the rear when the head restraints are

removed; the head restraints should be in

place and in the high position.

The head restraint for the centre seat

and those for the outer seats are not

interchangeable.

► Press the backrest release grip 1.

► Guide backrest 2 down to the horizontal

position.

Folding the backrests

They have two positions:

– A high position, for when the seat is in use:

► Pull the head restraint fully up.

– A low position, for stowing, when the seat is

not in use:

► Press the lug A to release the head

restraint and push it down.

Manoeuvring the seat backrests should

only be done when the vehicle is

stationary.

When the backrest is released, the red

indicator is visible in the release grip.

First steps:

► Lower the head restraints.

Repositioning the backrests

First check that the outer seat belts are

lying vertically ﬂat alongside the backrest

latching rings.

► If necessary, move the front seats forward.

► Check that no person or object will interfere

with folding down the backrests (clothing,

luggage, etc.).

► Check that the seat belts are free, not

engaged in the buckles. Release them so that

the backrest can be moved.

The rear head restraints can be removed.

Removing a head restraint

► Release the backrest using control 1.

► Tilt the backrest slightly forwards.

► Pull the head restraint fully up.

► Press the lug A to release the head restraint

and remove it completely.

Reﬁtting a head restraint

► Insert the head restraint rods into the guides

in the corresponding seat backrest.

► Push the head restraint down as far as it will

go.

Ease of use and comfort

Controls

air outlets and the air extractor in the boot

free from obstructions.

► Do not cover the sunshine sensor located

on the dashboard; this sensor is used to

regulate the automatic air conditioning

system.

► Operate the air conditioning system for at

least 5 to 10 minutes once or twice a month to

keep it in perfect working order.

Depending on version, the controls are

accessible in the "Air conditioning" touch

screen menu or are grouped together in the

control panel on the centre console.

Air distribution

► If the system does not produce cold air,

switch it oﬀ and contact a PEUGEOT dealer

or a qualiﬁed workshop.

When towing the maximum load on a steep

gradient in high temperatures, switching oﬀ

the air conditioning increases the available

engine power, enhancing the towing capacity.

► Put the backrest 2 in the upright position and

push it ﬁrmly to latch it home.

► Check that the red indicator is no longer

visible in the release grip 1.

► Ensure that the outer seat belts were not

trapped during the operation.

Please note: an incorrectly latched

backrest compromises the safety of

passengers in the event of sudden braking or

an accident.

The contents of the boot may be thrown

forward - risk of serious injury!

Avoid driving for too long with the

ventilation oﬀ or with prolonged operation

of interior air recirculation. Risk of misting and

deterioration of the air quality!

1. Windscreen demisting/defrosting vents

2. Front side window demisting/defrosting vents

3. Adjustable and closable side air vents

4. Adjustable and closable central air vents

5. Air outlets to the front footwells

If the interior temperature is very high

after the vehicle has stood for a long

time in the sunshine, air the passenger

compartment for a few moments.

Put the air ﬂow control at a setting high

enough to quickly change the air in the

passenger compartment.

6. Air outlets to the rear footwells (depending on

version)

Heating and Ventilation

Air intake

Advice

The air circulating in the passenger compartment

is ﬁltered and originates either from the

exterior, via the grille located at the base of the

windscreen, or from the inside in air recirculation

mode.

Using the ventilation and air

conditioning system

► To ensure that air is distributed evenly,

keep the external air intake grilles at the base

of the windscreen, the nozzles, the vents, the

Condensation created by the air

conditioning results in a discharge of

Ease of use and comfort -> Rear bench seat for Your Peugeot 208 4 Door 2020

Related Topics

Instruments

Access

Ease of use and comfort

Lighting and visibility

Safety

Driving

Practical information

In the event of a breakdown

Technical data

Touch screen bluetooth audio system

PEUGEOT Connect Radio

PEUGEOT Connect Nav