Get Instruments Guide for Peugeot 208 4 Door 2020

Instruments

5. Fuel gauge

6. Engine oil level indicator (depending on

engine)

Service indicator, then total distance recorder

(miles or km)

These functions are displayed successively

when the ignition is switched on.

7. Trip computer information

7. Engine oil level indicator (depending on

LCD instrument panels

1

engine)

Service indicator, then total distance recorder

(miles or km)

Dials

These functions are displayed successively

when the ignition is switched on.

8. Trip computer information

1. Analogue speedometer (mph or km/h)

2. LCD display

3. Rev counter (x 1000 rpm), graduation

depends on the engine (Petrol or Diesel)

Matrix instrument panel

LCD display - Type 2

Dials

LCD Display - Type 1

1. Cruise control / speed limiter settings

Display of speed limit signs

2. Display of driving aids

3. Digital speedometer (mph or km/h)

4. Driving mode selected

5. Gear shift indicator

Selector position and gear on automatic

gearbox

6. Fuel gauge

1. Coolant temperature indicator (°C) (Petrol or

Diesel)

Thermal comfort consumption indicator

(Electric)

2. Analogue speedometer (mph or km/h)

3. Matrix display

4. Rev counter (x 1000 rpm), graduation

depends on the engine (Petrol or Diesel)

Power indicator (Electric)

1. Cruise control / speed limiter settings

2. Digital speedometer (mph or km/h)

3. Driving mode selected

4. Gear shift indicator

Selector position and gear on automatic

gearbox

9

Instruments

5. Fuel gauge (Petrol or Diesel)

3. Digital speedometer (mph or km/h)

Display of driving aids

1. Fuel gauge (Petrol or Diesel)

Charge level indicator (Electric)

2. Remaining range (miles or km)

3. Cruise control / speed limiter settings

Display of speed limit signs

4. Digital speedometer (mph or km/h)

5. Total distance recorder (miles or km)

6. Rev counter (x 1000 rpm) (Petrol or Diesel)

Power indicator (Electric)

Charge level indicator (Electric)

Trip computer information

Power ﬂow / vehicle charge state (Electric)

4. Service indicator, then total distance recorder

(miles or km)

Matrix display

Remaining range (Electric)

These functions are displayed in turn when

the ignition is switched on.

Driving mode selected (other than "Normal"

mode)

7. Gear shift indicator (arrow and recommended

gear)

Selector position and gear on automatic

gearbox (Petrol or Diesel)

Head-up 3D digital display

Drive selector position (Electric)

Driving mode selected (other than "Normal"

mode)

This 3D digital instrument panel can be

customised.

8. Coolant temperature indicator (°C) (Petrol or

Diesel)

9. Analogue speedometer (mph or km/h) (Petrol

or Diesel)

Depending on the display mode selected, certain

information is hidden or presented diﬀerently.

Example with the "DIALS" display mode:

Displays

Some lamps have a ﬁxed location, the others

can alter location.

1. Cruise control / speed limiter settings

Display of speed limit signs

2. Gear shift indicator (arrow and recommended

gear)

For certain functions that have indicator lamps

for both operation and for deactivation, there is

only one dedicated location.

Selector position and gear on automatic

gearbox (Petrol or Diesel)

Drive selector position (Electric)

Permanent information

In the standard display, the instrument panel

shows:

– in ﬁxed locations:

10

Instruments

• Gearbox and gear shift indicator information.

• Fuel gauge (Petrol or Diesel).

• Driving range (Petrol or Diesel).

• Coolant temperature indicator (Petrol or

Diesel).

Changing the display mode

Customising the instrument

panel

1

You can modify the appearance of the instrument

panel by choosing:

– a display colour.

– a display mode.

• Charge level and driving range indicator

(Electric).

• Power indicator (Electric).

• Driving mode.

– in variable locations:

Display language and units

These depend on the touch screen

settings.

When travelling abroad, the speed must be

shown in the oﬃcial units of the country you

are driving in (mph, miles or km/h, km).

• Digital speedometer.

• Total distance recorder.

• Status or alert messages displayed

temporarily.

► Turn the thumbwheel on the left of the

steering wheel to display and scroll through the

various modes on the instrument panel.

► Press the thumbwheel to conﬁrm the mode.

If you do not press the thumbwheel, the selected

display mode is automatically applied after a few

moments.

Optional information

As a safety measure, these adjustments

must be carried out with the vehicle

stationary.

Depending on the display mode selected and the

active features, additional information may be

displayed:

– Rev counter.

– Trip computer.

Choosing a display colour

Display mode overview

With PEUGEOT Connect Nav

The instrument panel display colour depends on

the colour scheme chosen in this system.

► Press Settings in the side banner of

the touch screen.

► Select "Color schemes".

► Select a display colour and then press

"OK" to conﬁrm.

– Driving aid functions.

– "DIALS": standard display of analogue and

digital speedometers, distance recorder and:

• fuel gauge, coolant temperature indicator

and rev counter (Petrol or Diesel).

• battery charge indicator and power indicator

(Electric).

– NAVIGATION": standard display plus current

navigation information (map and navigation

instructions).

– Speed limiter or cruise control.

– Media currently playing.

– Navigation instructions.

– Analogue speedometer.

– Engine information (G-meters, Power-meters,

Boost, Torque) in Sport mode.

– Power ﬂow (Electric).

Setting the display mode

– "DRIVING" : standard display, plus information

relating to active driving aid systems.

In each mode, speciﬁc types of information are

displayed on the instrument panel.

11

Instruments

– "MINIMAL": 2D display with digital

speedometer, distance recorder and:

• fuel gauge and engine coolant temperature

indicator (Petrol or Diesel).

• battery charge indicator (Electric).

– "PERSONAL 1" / "PERSONAL 2": displays

the information selected by the driver in the

centre of the instrument panel.

• "Energy consumption" (depending on

version).

► Conﬁrm to save and exit.

Information is displayed immediately on the

instrument panel if the corresponding display

mode is selected.

When the ignition is switched on

Certain red or orange warning lamps come on

for a few seconds when the ignition is switched

on. These warning lamps should go oﬀ as soon

as the engine is started.

For more information on a system or a function,

refer to the corresponding section.

The type of information selected in the

"PERSONAL 1" mode is not available in

the "PERSONAL 2" mode.

Warning lamp continuously

lit

The illumination of a red or orange warning lamp

indicates the occurrence of a fault that needs

further investigation.

Conﬁguring a "PERSONAL" display mode

With PEUGEOT Connect Radio

► Press Settings in the upper banner of

the touch screen.

Warning and indicator

lamps

Displayed as symbols, the warning and indicator

lamps inform the driver of the occurrence of a

malfunction (warning lamps) or of the operating

status of a system (operation or deactivation

indicator lamps). Certain lamps light up in two

ways (ﬁxed or ﬂashing) and/or in several colours.

► Select "Conﬁguration".

If a warning lamp remains lit

► Select "Instrument panel

personalisation".

With PEUGEOT Connect Nav

► Press Settings in the side banner of

the touch screen.

The references (1), (2) and (3) in the warning

and indicator lamp description indicate whether

you should contact a qualiﬁed professional in

addition to the immediate recommended actions.

(1): You must stop the vehicle.

Stop as soon as it is safe to do so and switch oﬀ

the ignition.

(2): Contact a PEUGEOT dealer or a qualiﬁed

workshop.

(3): Visit a PEUGEOT dealer or a qualiﬁed

workshop.

► Select "OPTIONS".

► Select "Instrument panel

personalisation".

► Select "PERSONAL 1" or "PERSONAL 2".

► Select the type of information using the scroll

arrows in the touch screen:

• "Default" (empty).

• "Trip computer".

• "Media".

• "G-metres" (depending on version).

• "Power meters + Boost + Torque"

(depending on version).

Associated warnings

The illumination of a lamp may be accompanied

by an audible signal and/or a message displayed

in a screen.

Relating the type of alert to the operating status

of the vehicle allows you to determine whether

the situation is normal or whether a fault has

occurred: refer to the description of each lamp

for further information.

12

Instruments

Carry out (1) and then (2).

Door(s) open

Fixed, associated with a message

List of warning and

indicator lamps

1

System malfunction (Electric)

Fixed.

An anomaly involving the electric motor or

traction battery has been detected.

Carry out (1) and then (2).

identifying the access.

A door or the tailgate is not properly closed

(speed less than 6 mph (10 km/h)).

Fixed, associated with a message

identifying the access, accompanied by

an audible signal.

Red warning/indicator lamps

STOP

Fixed, associated with another warning

lamp, accompanied by the display of a

message and an audible signal.

A serious fault with the engine, braking system,

power steering, automatic gearbox or a major

electrical fault has been detected.

Carry out (1) and then (2).

Cable connected (Electric)

Fixed.

A door or the tailgate is not properly closed

(speed above 6 mph (10 km/h)).

It is not possible to start the vehicle while

the charging cable is connected to the vehicle’s

connector.

Disconnect the charging cable and close the

ﬂap.

Seat belts not fastened/unfastened

Fixed or ﬂashing, accompanied by an

increasing audible signal.

A seat belt has not been fastened or has been

unfastened.

Engine self-diagnostics system (Petrol or

Diesel)

12 V battery charge

Fixed.

Manual parking brake

Fixed.

The parking brake is applied or not

properly released.

The battery charging circuit has a fault

(dirty terminals, slack or cut alternator belt, etc.).

Carry out (1).

If the electric parking brake is no longer working,

immobilise the vehicle:

► With the manual gearbox, engage a gear.

► With the EAT6 automatic gearbox, move the

gear selector to position P.

► With the EAT8 automatic gearbox or drive

selector, ﬁt the chock against one of the wheels.

Clean and tighten the terminals. If the warning

lamp does not go oﬀ when the engine is started,

carry out (2).

A major engine fault has been

detected.

Carry out (1) and then (2).

Maximum engine coolant temperature

Fixed with display blocks lit in red

(with matrix instrument panel).

Electric parking brake

Fixed.

The electric parking brake is applied.

Flashing.

Application/release is faulty.

Carry out (1): park on ﬂat ground (on a level

surface).

With a manual gearbox, engage a gear.

With an automatic gearbox or drive selector,

select mode P.

or

Fixed (except on matrix instrument panel).

The cooling system temperature is too high.

Carry out (1), then allow the engine to cool

before topping up the level, if necessary. If the

problem persists, carry out (2).

Engine oil pressure (Petrol or Diesel)

Fixed.

Switch oﬀ the ignition and carry out (2).

There is a fault with the engine lubrication

system.

13

Instruments

Braking

"Parking brake fault".

Automatic release of the electric parking brake is

unavailable.

As soon as traﬃc conditions permit, regenerate

the ﬁlter by driving at a speed of at least 37 mph

(60 km/h) until the warning lamp goes oﬀ.

Fixed, accompanied by an audible signal

and a message indicating that the additive

level in the particle ﬁlter is too low.

The low level in the additive tank has been

reached.

Top up without delay: carry out (3).

Fixed.

The brake ﬂuid level in the braking circuit

has dropped signiﬁcantly.

Carry out (2).

Carry out (1), then top up with ﬂuid that complies

with the manufacturer's recommendations. If the

problem persists, carry out (2).

Fixed.

Service warning lamp ﬁxed and

service spanner ﬂashing then

ﬁxed.

The servicing interval has been exceeded.

The vehicle must be serviced as soon as

possible.

The electronic brake force

distribution (EBFD) system is faulty.

Carry out (1) and then (2).

Low fuel level (Petrol or Diesel)

Fixed, with the blocks lit red,

Only with BlueHDi Diesel engines.

Orange warning/indicator lamps

Engine pre-heating (Diesel)

Temporarily on

(up to approximately 30 seconds in

severe weather conditions).

When switching on the ignition, if the weather

conditions and the engine temperature make it

necessary.

Wait until the warning lamp goes oﬀ before

starting.

When the warning lamp goes oﬀ, starting will

occur immediately if you press and hold:

– the clutch pedal with a manual gearbox.

– the brake pedal with an automatic gearbox.

If the engine does not start, make the engine

starting request again, while keeping your foot

on the pedal.

accompanied by an audible signal

(with the matrix instrument panel)

or

Fixed, with the reserve level shown in red,

accompanied by an audible signal and the

display of a message (except with the matrix

instrument panel).

When it ﬁrst comes on, there remains

approximately 5 litres of fuel in the tank

(reserve).

Until the fuel level is topped up, this alert will

be repeated every time the ignition is switched

on, with increasing frequency as the fuel level

decreases and approaches zero.

Refuel without delay to avoid running out of fuel.

Never drive until completely empty, as

this could damage the emissions control and

injection systems.

Service

Temporarily on, accompanied by the

display of a message.

One or more minor faults, for which there is/are

no speciﬁc warning lamp(s), have been detected.

Identify the cause of the fault using the message

displayed in the instrument panel.

You can deal with certain problems yourself, for

example an open door or the start of saturation

of the particle ﬁlter.

For other faults, such as with the tyre under-

inﬂation detection system, carry out (3).

Fixed, accompanied by the display of a

message.

One or more major faults, for which there is/are

no speciﬁc warning lamp(s), have been detected.

Identify the cause of the fault using the message

displayed in the instrument panel, then carry out

(3).

Particle ﬁlter (Diesel)

Fixed, accompanied by an audible signal

and a message about the risk of particle

ﬁlter blockage.

The particle ﬁlter is nearing saturation.

Fixed, accompanied by the message

14

Instruments

Low traction battery level (Electric)

Fixed, accompanied by an audible signal.

The state of charge of the traction battery

is low.

View the remaining range.

Put the vehicle on charge as soon as possible.

Fixed.

SCR emissions control system (BlueHDi)

Fixed when the ignition is

1

A minor engine fault has been

detected.

Carry out (3).

switched on, accompanied

by an audible signal and a message.

A malfunction involving the SCR emissions

control system has been detected.

This alert disappears once the exhaust

emissions return to normal levels.

Flashing AdBlue^®warning

AdBlue^®(BlueHDi)

On for around 30 seconds when starting

the vehicle, accompanied by a message

indicating the driving range.

The driving range is between 1,500 and 500

miles (2,400 and 800 km).

Top up the AdBlue^®.

Limited power (Electric)

Fixed.

The state of charge of the traction battery

is critical.

The engine power gradually decreases.

You must put the vehicle on charge.

If the warning lamp remains lit, carry out (2).

lamp on switching on the

ignition, with the Service and Engine self-

diagnostics warning lamps on ﬁxed,

accompanied by an audible signal and a

message indicating the driving range.

Depending on the message displayed, it may be

possible to drive for up to 685 miles (1,100 km)

before the engine immobiliser is triggered.

Carry out (3) without delay, to avoid starting

being prevented.

Fixed, on switching on the ignition,

accompanied by an audible signal and a

message indicating the driving range.

The driving range is between 500 and 62 miles

(800 and 100 km).

Promptly top up the AdBlue^®, or carry out (3).

Flashing, accompanied by an audible

signal and a message indicating the

driving range.

The driving range is less than 62 miles (100 km).

You must top up the AdBlue^®to avoid engine

starting being prevented, or carry out (3).

Flashing, accompanied by an audible

signal and a message indicating that

starting is prevented.

The AdBlue^®tank is empty: the regulatory engine

immobiliser prevents the engine from being

restarted.

Pedestrian horn (Electric)

Fixed.

Horn fault detected.

Carry out (3).

Engine self-diagnostics system (Petrol or

Diesel)

Flashing AdBlue^®warning

lamp on switching on the

Flashing.

The engine management system has a

fault.

There is a risk that the catalytic converter will be

destroyed.

You must carry out (2).

Fixed.

The emissions control system has a fault.

The warning lamp should go oﬀ when the engine

is started.

ignition, with the Service and Engine self-

diagnostics warning lamps on ﬁxed,

accompanied by an audible signal and a

message indicating that starting is prevented.

The engine immobiliser prevents the engine

from restarting (over the authorised driving limit

after conﬁrmation of an emissions control system

malfunction).

To start the engine, carry out (2).

To restart the engine, top up the AdBlue^®, or

carry out (2).

Carry out (3) without delay.

You must add at least 5 litres of AdBlue^®to its

tank.

15

Instruments

Deactivation of the automatic functions

(with electric parking brake)

Fixed.

The "automatic application" (on switching

oﬀ the engine) and "automatic release" (on

acceleration) functions are deactivated.

If automatic application/release is no longer

possible:

► Start the engine.

► Use the control lever to apply the parking

brake.

► Take your foot fully oﬀ the brake pedal.

► Hold the control lever pressed in the release

direction for between 10 and 15 seconds.

► Release the control lever.

► Depress and hold the brake pedal.

► Hold the control lever in the “Application”

direction for 2 seconds.

message "Parking brake fault".

If these warning lamps come on after the engine

is switched oﬀ and then restarted, carry out (3).

The parking brake is faulty: manual and

automatic functions may not be working.

When stationary, to immobilise the vehicle:

► Pull and hold the control lever for

approximately 7 to 15 seconds, until the indicator

lamp comes on on the instrument panel.

If this procedure does not work, secure the

vehicle:

Anti-lock braking system (ABS)

Fixed.

The anti-lock braking system has a fault.

The vehicle retains conventional braking.

Drive carefully at moderate speed, then carry

out (3).

Power steering

► Park on a level surface.

Fixed.

► With a manual gearbox, engage a gear.

► With an automatic gearbox or drive selector,

select P, then place the supplied chock against

one of the wheels.

The power steering has a fault.

Drive carefully at moderate speed, then carry

out (3).

Dynamic stability control (DSC)/Anti-slip

regulation (ASR)

Then carry out (2).

Distance Alert / Active Safety Brake

Fixed, accompanied by the display of a

message.

The system has been deactivated via the touch

screen ( Driving/ Vehiclemenu).

Fixed.

The system is deactivated.

The DSC/ASR system is reactivated

automatically when the vehicle is restarted, and

from around 31 mph (50 km/h).

Below 31 mph (50 km/h), it can be reactivated

manually.

► Release the control lever and the brake

pedal.

Malfunction (with electric parking brake)

Fixed, accompanied by the

message "Parking brake fault".

The vehicle cannot be immobilised with the

engine running.

If manual application and release commands are

not working, the electric parking brake control

lever is faulty.

The automatic functions must be used at all

times and are automatically re-enabled in the

event of a control lever fault.

Distance Alert/Active Safety Brake

Flashing.

The system activates and brakes the

vehicle momentarily so as to reduce the speed of

collision with the vehicle ahead.

Fixed, accompanied by a message and

an audible signal.

Flashing.

The DSC/ASR adjustment is activated if

there is a loss of grip or trajectory.

Fixed.

The DSC/ASR system has a fault.

Carry out (3).

The system has a fault.

Carry out (3).

Distance Alert / Active Safety Brake

Fixed.

Carry out (2).

The system has a fault.

Fixed, accompanied by the

16

Instruments

Emergency brake malfunction (with

electric parking brake)

Carry out (3).

Reinitialise the detection system after adjusting

the pressure.

Under-inﬂation warning lamp

ﬂashing then ﬁxed and Service

warning lamp ﬁxed.

The tyre pressure monitoring system is faulty.

Under-inﬂation detection is no longer monitored.

Check the tyre pressures as soon as possible

and carry out (3).

1

Airbags

Fixed, accompanied by the

Fixed.

message "Parking brake fault".

Emergency braking does not deliver optimal

performance.

If automatic release is not available, use manual

release or carry out (3).

One of the airbags or seat belt

pretensioners is faulty.

Carry out (3).

Front passenger airbag (ON)

Fixed.

Hill start assist

The front passenger airbag is activated.

The control is in the "ON" position.

In this case, do NOT install a "rearward

facing" child seat on the front passenger seat

- Risk of serious injury!

Fixed, accompanied by the

message "Anti roll-back system

fault".

The system has a fault.

Carry out (3).

Stop & Start (Petrol or Diesel)

Fixed, accompanied by the display of a

message.

The Stop & Start system has been deactivated

manually.

Front passenger airbag (OFF)

Fixed.

The engine will not switch oﬀ at the next traﬃc

stop.

Active Lane Keeping Assistance

Fixed.

The system has been automatically

deactivated or placed on standby.

Flashing.

You are about to cross a broken

lane marking without operating the direction

indicators.

The system is activated, then corrects the

trajectory on the side of the lane marking

detected.

The front passenger airbag is deactivated.

The control is in the "OFF" position.

A "rearward facing" child seat can be installed,

unless there is a fault with the airbags (Airbags

warning lamp on).

Fixed.

The Stop & Start system has been

deactivated automatically.

The engine will not switch oﬀ at the next traﬃc

stop, if the exterior temperature is:

– below 0°C.

Parking sensors

Fixed, accompanied by the display of a

message and an audible signal.

The system has a fault.

Carry out (3).

– above +35°C.

Flashing then ﬁxed, accompanied by a

message.

The system has a fault.

Carry out (3).

Fixed.

Under-inﬂation

The system has a fault.

Carry out (3).

Fixed.

Rear foglamp

Fixed.

The pressure in one or more tyres is too

Lane positioning assist

Fixed, accompanied by the Service

warning lamp.

low.

The lamp is on.

Check the pressure of the tyres as soon as

possible.

The system has a fault.

17

Instruments

Green warning/indicator lamps

Direction indicators

Fully depress the clutch pedal.

Foot on the brake

Stop & Start (Petrol or Diesel)

Fixed.

When the vehicle stops, the Stop & Start

puts the engine into STOP mode.

Flashing temporarily.

Flashing with audible signal.

The direction indicators are on.

Sidelamps

Fixed.

Omission or insuﬃcient pressure on the

brake pedal.

Fixed.

The lamps are on.

With the EAT6 automatic gearbox, with the

engine running, before releasing the parking

brake, to move out of position P.

With the EAT8 automatic gearbox or the drive

selector, it may be necessary to depress the

brake pedal to unlock the gearbox from mode N.

This warning lamp will remain on if you attempt

to release the parking brake without depressing

the brake pedal.

STOP mode is momentarily unavailable

or START mode is automatically triggered.

Dipped beam headlamps

Vehicle ready to drive (Electric)

Fixed, accompanied by an audible signal

when it comes on.

The vehicle is ready to drive and the thermal

comfort systems are available.

The indicator lamp goes out upon reaching a

speed of approximately 3 mph (5 km/h) and

lights up again when the vehicle stops moving.

The lamp will go out when you turn oﬀ the

engine and exit the vehicle.

Fixed.

The lamps are on.

Automatic headlamp dipping

Fixed.

The function has been

activated via the touch screen (Driving / Vehicle

menu).

The lighting control stalk is in the "AUTO"

position.

Automatic gearbox (EAT8) or Drive

selector (Electric)

Fixed.

Park Assist or Full Park Assist

Fixed.

The automatic gearbox is locked.

The drive selector is locked.

You must press the Unlock button to unlock it.

Blue warning/indicator lamps

Main beam headlamps

The function is active.

Active Lane Keeping Assist

Fixed.

The function has been activated.

All the conditions have been met: the system is

operating.

Water in Diesel fuel ﬁlter (Diesel)

Fixed.

The lamps are on.

Fixed (with LCD instrument panels).

The Diesel fuel ﬁlter contains water.

Carry out (2) without delay. Risk of damaging the

fuel injection system!

Black/white warning lamps

Foot on the clutch (Petrol or Diesel)

Automatic wiping

Fixed (with LCD instrument panels).

Stop & Start: the change to START mode

is rejected because the clutch pedal is not fully

depressed.

Fixed.

Automatic windscreen wiping is

activated.

18

Instruments

Have your vehicle serviced very soon.

Retrieving the service information

Indicators

1

The service information can be accessed

via the "Check/Diagnostics" button in the

Driving/Vehicle menu of the touch screen.

Service spanner ﬂashing

Flashing then ﬁxed, when the

ignition is switched on.

(With BlueHDi Diesel engines, combined with the

Service warning lamp.)

The servicing interval has been exceeded.

Have your vehicle serviced as soon as possible.

Service indicator

The servicing information is expressed in terms

of distance (kilometres or miles) and time

(months or days).

The alert is given at whichever of these two

terms is reached ﬁrst.

The servicing information is displayed in the

instrument panel. Depending on the version of

the vehicle:

– The distance recorder display line indicates

the distance remaining before the next service

is due, or the distance travelled since it was due

preceded by the "-" sign.

Engine oil level indicator

(Depending on version.)

On versions ﬁtted with an electric oil level

indicator, the engine oil level status is displayed

on the instrument panel for a few seconds upon

switching the ignition on, after the servicing

information.

Resetting the service indicator

The service indicator must be reset after each

service.

If you have serviced your vehicle yourself:

► Switch oﬀ the ignition.

The level read will only be correct if the

vehicle is on level ground and the engine

has been oﬀ for more than 30 minutes.

– An alert message indicates the distance

remaining, as well as the period before the next

service is due or how long it is overdue.

Oil level incorrect

This is indicated, depending on the instrument

panel, by the display of "OIL" or by the message

"Oil level incorrect", accompanied by the

lighting of the Service warning lamp and an

audible signal.

If the low oil level is conﬁrmed by a check using

the dipstick, the level must be topped up to avoid

damage to the engine.

The value indicated is calculated

according to the distance covered and

the time elapsed since the last service.

The alert may also be triggered close to a

due date.

► Press and hold the button located on the end

of the lighting control stalk.

► With no action on the brake pedal, press the

START/STOP button once; a temporary display

window appears and a countdown begins.

► When the display indicates =0, release the

lighting control stalk button; the spanner symbol

disappears.

Service spanner

For more information on Checking levels, refer

to the corresponding section.

On temporarily when the ignition is

switched on.

Between 620 and 1,860 miles (1,000 and 3,000

km) remain before the next service is due.

Fixed, when the ignition is switched on.

The next service is due in less than 620

miles (1,000 km).

Oil level indicator fault

If you disconnect the battery following

this operation, lock the vehicle and wait

at least 5 minutes for the reset to be

registered.

This is indicated, depending on the instrument

panel, by the display of "OIL_ _" or by the

message "Oil level measurement invalid",

19

Instruments

accompanied by the lighting of the Service

warning lamp and an audible signal.

Contact a PEUGEOT dealer or a qualiﬁed

workshop.

You must stop the vehicle as soon as it is

safe to do so.

Wait a few minutes before switching oﬀ the

engine.

It is then no longer possible to start the

engine until the minimum level of AdBlue^®has

been topped up.

In the event of a fault with the electric

indicator, the oil level is no longer

monitored.

If the system is faulty, you must check the

engine oil level using the manual dipstick

located under the bonnet.

After switching oﬀ the ignition, carefully

open the bonnet and check the coolant

level.

Manually displaying the driving range

While the driving range is greater than

1,500 miles (2,400 km), it is not displayed

automatically.

You can view the range information by

pressing the "Check / Diagnostic" button

in the touch screen’s Driving / Vehicle menu.

For more information on Checking

levels, refer to the corresponding

section.

For more information on Checking levels,

refer to the corresponding section.

Actions required related to a lack of

AdBlue^®

The following warning lamps light up when the

quantity of AdBlue^®is lower than the reserve

level corresponding to a range of 1,500 miles

(2,400 km).

Together with the warning lamps, messages

regularly remind you of the need to top up to

avoid engine starting being prevented. Refer to

the Warning and indicator lamps section for

details of the messages displayed.

AdBlue^®range indicators

(BlueHDi)

The Diesel BlueHDi engines are equipped with

a system that associates the SCR (Selective

Catalytic Reduction) emissions control system

and the Diesel particle ﬁlter (DPF) for the

treatment of exhaust gases. They cannot

function without AdBlue^®ﬂuid.

When the level of AdBlue^®falls below the

reserve level (between 1,500 and 0 miles (2,400

and 0 km)), a warning lamp lights up when

the ignition is switched on and an estimate

of the distance that can be travelled before

engine starting is prevented is displayed in the

instrument panel.

Engine coolant temperature

indicator

For more information on AdBlue^®

(BlueHDi engines), and in particular on

topping up, refer to the corresponding section.

With the engine running:

– In zone A, the temperature is correct.

– In zone B, the temperature is too high; the

associated warning lamp and the central STOP

warning lamp come on in red on the instrument

panel, accompanied by the display of a message

and an audible signal.

The engine starting prevention system

required by regulations is activated

automatically once the AdBlue^®tank is empty.

20

Instruments

Malfunction of the SCR emissions

control system

While driving, the message is displayed every 30

seconds. The alert is repeated when switching

on the ignition.

You can continue driving for up to 685 miles

(1,100 km) before the engine immobiliser

system is triggered.

Warning

lamps lit

Action

Remaining

driving

range

1

Malfunction detection

Top up.

Between

1,500 miles

and 500

miles (2,400

km and

If a malfunction is detected,

these warning lamps come on,

accompanied by an audible

signal and an "Emissions fault”

or “NO START IN” message.

Have the system checked by a

PEUGEOT dealer or a qualiﬁed

workshop as soon as possible.

800 km)

Top up as

soon as

possible.

Between

Starting prevented

The alert is triggered while driving, when the

fault is detected for the ﬁrst time, and thereafter

when switching on the ignition for subsequent

journeys, while the cause of the fault persists.

500 miles

and 62 miles

(800 km and

100 km)

Whenever the ignition is switched on, the

"Emissions fault: Starting prevented" or "NO

START IN" message is displayed.

To be able to restart the engine, contact

a PEUGEOT dealer or a qualiﬁed

workshop.

If the fault is temporary, the alert

disappears during the next journey, after

self-diagnostic checks of the SCR emissions

control system.

A top-up is

essential,

due to the

risk that the

engine will

be prevented

from starting.

Between

62 miles

and 0 miles

(100 km and

0 km)

Power indicator (Electric)

Malfunction conﬁrmed during the

permitted driving phase (between 685

miles and 0 miles (1,100 km and 0 km))

To be able

to restart

0 miles (km)

If the fault indication is still displayed

permanently after 31 miles (50 km) of driving, the

fault in the SCR system is conﬁrmed.

The AdBlue warning lamp ﬂashes, and an

"Emissions fault: Starting prevented in X

miles" or "NO START IN X miles" message is

displayed, indicating the driving range in miles or

kilometres.

the engine,

add at least

5 litres of

AdBlue^®to

its tank.

CHARGE

Traction battery charging during deceleration

and braking.

21

Instruments

ECO

With the ignition oﬀ, opening the driver's

door activates the indicator.

Thermal comfort

consumption indicator

(Electric)

Moderate energy consumption and optimised

driving range.

POWER

Energy consumption by the drive train during

acceleration.

NEUTRAL

On switching on the ignition, your vehicle’s

electric drive train neither consumes nor

generates energy: after sweeping over the

indicator, the needle or the cursor returns to its

"neutral" position.

Associated warning lamps

Two successive alert levels indicate that the

energy available has dropped to a low level:

1st level: Reserve

The state of charge of the traction battery

is low.

Fixed, accompanied by an audible signal.

► View the remaining range on the instrument

panel.

With the ignition oﬀ, opening the driver's

door activates the indicator, which moves

to the "neutral" position.

► Put the vehicle on charge as soon as

possible.

2nd level: Critical

The state of charge of the traction battery

is critical.

Fixed, together with the reserve warning lamp,

accompanied by an audible signal.

► You must put the vehicle on charge.

The gauge shows the consumption of electric

power for thermal comfort functions.

It concerns the following equipment and

systems:

– Heating.

– Air conditioning.

– Front demisting/defrosting.

– Rear screen demisting/defrosting.

– Heated seats.

The traction battery powers the heating and air

conditioning systems.

Charge level indicator

(Electric)

The remaining range is no longer

calculated. The drive train power

gradually decreases.

The heating and air conditioning are switched

oﬀ (even if the needle or cursor indicating

their consumption is not at the ECO position).

This equipment and these functions can be

used:

– If the vehicle is not plugged in, when the

READY lamp is lit.

– If the vehicle is plugged in, when the ignition is

switched on.

Selecting Eco mode limits the performance of

some equipment. The needle or cursor on the

The traction battery charge status and remaining

range are displayed continuously when the

vehicle is started.

22

Instruments

thermal comfort consumption indicator then

moves into the "ECO" zone.

This information is also displayed

automatically every time the ignition is

switched on.

With BLUETOOTH touch

1

screen audio system

To quickly heat or cool the passenger

compartment, feel free to temporarily

select the maximum heating or cooling

setting.

Excessive use of thermal comfort equipment,

particularly at low speed, can signiﬁcantly

decrease the vehicle's range.

Remember to optimise equipment settings

upon achieving the desired level of comfort,

and adjust them if necessary whenever you

start the vehicle.

After an extended period without using the

heating, you may notice a slight odour during

the ﬁrst few minutes of use.

► Press on the Settings menu.

► Select "Display".

Total distance recorder

The total distance recorder measures the total

distance travelled by the vehicle since its initial

registration.

With the ignition on, the total distance is

displayed at all times. It remains displayed for

30 seconds after switching oﬀ the ignition. It is

displayed when the driver's door is opened, and

when the vehicle is locked or unlocked.

► Adjust the brightness by

pressing the buttons.

You can also switch oﬀ the screen:

► Select "Turn oﬀ screen".

The screen goes oﬀ completely.

► Press the screen again (anywhere on its

surface) to activate it.

When travelling abroad, you may have to

change the distance units (km or miles):

the road speed must be displayed in the local

country’s oﬃcial unit (km/h or mph).

The unit is changed via the screen

conﬁguration menu, with the vehicle

stationary.

With PEUGEOT Connect

Radio

► Press this button to select the

Settings menu.

► Select "Brightness".

Manual test

This function allows you to check certain

indicators and display the alerts log.

It can be accessed via the "Diagnostic /

Check" button in the Driving / Vehicle

touch screen menu.

► Adjust the brightness by pressing the

arrows or moving the slider.

Lighting dimmer

This system allows the brightness of the

instruments and controls to be adjusted to suit

the ambient light level.

The settings are applied immediately.

► Press outside the settings window to exit.

You can also switch oﬀ the screen:

► Press this button to select the

Settings menu.

The following information is displayed on the

instrument panel:

– Engine oil level.

– Next service due.

– Tyre pressures.

► Select "Dark".

– Driving range associated with the AdBlue and

the SCR system (BlueHDi Diesel).

– Active alerts.

The screen goes oﬀ completely.

23

Instruments

► Press the screen again (anywhere on its

surface) to activate it.

Pressing the end of the wiper control stalk

displays the trip computer data.

With digital instrument panel

The trip computer data is permanently displayed

when the "PERSONAL" display mode is

selected.

In all other display modes, pressing the end of

the wiper control stalk will cause this data to

appear temporarily in a speciﬁc window.

Display of the various tabs

Trip reset

► When the desired trip is displayed,

press the button on the end of the wiper

control stalk for more than 2 seconds.

Trips "1" and "2" are independent and are used

identically.

WithPEUGEOT Connect Nav

► Press this button to select the

Settings menu.

► Select "OPTIONS".

► Select "Screen conﬁguration".

Deﬁnitions

► Select the "Brightness" tab.

► Adjust the brightness by pressing the

arrows or moving the slider.

Range

(miles or km)

The distance which can still be travelled

with the fuel remaining in the tank

(depending on the average fuel consumption

over the last few miles (kilometres) travelled).

This value may vary following a change in

the style of driving or the terrain, resulting

in a signiﬁcant change in the current fuel

consumption.

When the range falls below 19 miles (30 km),

dashes are displayed.

After ﬁlling with at least 5 litres of fuel, the range

is recalculated and is displayed if it exceeds 62

miles (100 km).

► Press this button to save and exit.

You can also switch oﬀ the screen:

► Press this button to select the

Settings menu.

► Select "Turn oﬀ screen".

► Pressing the button located on the end of the

wiper control stalk displays the following tabs

in turn:

The screen goes oﬀ completely.

► Press the screen again (anywhere on its

surface) to activate it.

– Current information:

• Driving range (Petrol or Diesel).

• Current fuel consumption.

• Stop & Start time counter (Petrol or Diesel).

• Total mileage (Electric).

Trip computer

Information displayed about the current journey

(range, fuel consumption, average speed, etc.).

If dashes instead of ﬁgures continue to be

displayed when driving, contact a PEUGEOT

dealer or a qualiﬁed workshop.

– Trips "1" then "2":

Data displayed on the

instrument panel

With instrument panels with dials

• Average speed.

• Average fuel consumption.

• Distance travelled.

Current fuel consumption

(mpg or l/100 km or km/l)

(miles/kWh or kWh/100 km or km/kWh)

24

Instruments

Calculated based on the past few

seconds.

This function is only displayed at speeds above

19 mph (30 km/h).

Right thumbwheel: air ﬂow adjustment (rotation)/

direct access to the Climate menu (press).

Access to menus.

5-inch touch screen

1

This system gives access to the following

elements:

– Audio system and telephone controls and

display of related information.

Return to the previous screen or conﬁrm.

Average fuel consumption

– Vehicle function and equipment setting menus.

– Air conditioning system controls (depending

on version).

(mpg or l/100 km or km/l)

(miles/kWh or kWh/100 km or km/kWh)

Calculated since the last trip

computer reset.

After a few moments with no action on

the second page, the ﬁrst page is

displayed automatically.

For safety reasons, always stop the

vehicle before performing operations

that require sustained attention.

Some functions are not accessible while

driving.

Average speed

(mph or km/h)

Menus

Radio

Calculated since the last trip computer

reset.

See "Audio equipment and telematics"

section.

Media

Distance travelled

(miles or km)

Recommendations

Do not use pointed objects on the touch screen.

Do not touch the touch screen with wet hands.

Use a soft, clean cloth to clean the touch screen.

See "Audio equipment and telematics"

section.

Calculated since the last trip computer

reset.

Climate

Settings for temperature, air ﬂow, etc.

For more information on Manual air

conditioning, refer to the corresponding section.

Telephone

Stop & Start time counter

Main controls

(minutes/seconds or hours/minutes)

See "Audio equipment and telematics"

section.

If your vehicle is equipped with Stop & Start, a

time counter calculates the time spent in STOP

mode during a journey.

It resets to zero every time the ignition is

switched on.

Driving

Activation, deactivation and settings for

certain functions.

With the ignition oﬀ: system start-up.

With the engine running: mute.

Left thumbwheel: volume adjustment

(rotation)/direct access to the Media

menu (press).

Settings

Main system settings.

25

Instruments

Use a soft, clean cloth to clean the touch screen.

Main controls

For more information on Manual air

conditioning and Automatic dual-zone air

conditioning, refer to the corresponding section.

7-inch or 10-inch touch

screen

This system gives access to the following

elements:

With 7-inch touch screen

With All-In-One

– Permanent display of the time and the exterior

temperature (a blue warning lamp appears if

there is a risk of ice).

– Heating/air conditioning controls.

– Vehicle functions and equipment setting

menus.

– Audio system and telephone controls and

display of related information.

– Display of visual manoeuvring aid functions

(visual parking sensor information, Park Assist,

etc.).

– Internet services and display of related

information.

– Navigation system controls and

display of related information (depending on

version).

Use the buttons arranged around the touch

screen to access the menus, then press the

virtual buttons on the touch screen.

Audio system on/oﬀ.

Volume control / mute.

See "Audio equipment and

telematics" section.

With 10-inch touch screen

For safety reasons, always stop the

vehicle before performing operations

that require sustained attention.

Some functions are not accessible while

driving.

Access to the rolling menu display.

► Press this button located on the side of the

touch screen, then press the virtual buttons on

the touch screen.

Access to the air conditioning settings.

► Press this button located below the

touch screen.

Recommendations

This screen is of the capacitive type.

Use the buttons arranged below the touch

screen to access the menus, then press the

virtual buttons on the touch screen.

Do not use pointed objects on the touch screen.

Do not touch the touch screen with wet hands.

26

Instruments

For more information on Manual air

conditioning and Automatic dual-zone air

conditioning, refer to the corresponding section.

Connected Navigation*

See "Audio equipment and

telematics" section.

Principles

Some menus may display across two pages:

press the "OPTIONS" button to access the

second page.

Information banner(s)

1

Certain information is displayed permanently in

the touch screen banner(s).

7-inch touch screen upper banner

If no action is performed on the second

page, the ﬁrst page is displayed

automatically.

– Time and exterior temperature (a blue warning

lamp appears if there is a risk of ice).

– Reminder of the air conditioning information,

and direct access to the corresponding menu.

– Reminder of the information in the

Radio Media and Telephone menus.

– Notiﬁcations.

Driving or Vehicle**

Activation, deactivation and

settings for certain functions.

The functions are organised in 2 tabs : "Driving

functions" and "Vehicle settings".

Telephone

To deactivate/activate a function, select "OFF"

or "ON".

Conﬁgure a function.

– Access to the Settings for the touch screen

and the digital instrument panel (date/time,

languages, units, etc.).

See "Audio equipment and

telematics" section..

Applications

Access to certain conﬁgurable

equipment.

Access additional information on the

function.

Conﬁrm.

10-inch HD touch screen side banners

– Exterior temperature (a blue warning lamp

appears if there is a risk of ice).

– Access to the Settings for the touch screen

and the digital instrument panel (date/time,

languages, units, etc.).

Return to the previous page or conﬁrm.

Electric / Energy

Access the speciﬁc Electric functions

(energy ﬂow, consumption statistics, deferred

charge) organised in the corresponding 3 tabs.

or

Menus

Press with three ﬁngers on the touch

screen to show all menu buttons.

– Notiﬁcations.

Settings

– Reminder of the air conditioning information,

and direct access to the corresponding menu.

– Time.

Main settings for the audio system,

touch screen and digital instrument panel.

Volume adjustment/mute.

See "Audio equipment and telematics"

section.

Radio / Media

See "Audio equipment and

telematics" section..

Electric / Energy menu

Depending on version, this is accessible either:

Climate

Settings for temperature, air ﬂow, etc.

* The TomTom Traﬃc logo displayed on the map conﬁrms the availability of connected navigation services. For more information, refer to the connected

navigation section.

** Depending on equipment.

27

Instruments

– directly, by pressing the button near the

touch screen.

– via the Applications menu.

Activation

► Connect the vehicle to the desired charging

equipment.

► Press this button within one minute to

activate the system (conﬁrmed by the

charging indicator lamp coming on in blue).

Energy ﬂows

The Flow tab provides a real-time representation

of the electric drive train’s operation.

– Blue bar chart: directly consumed energy

supplied by the traction battery.

– Green bar chart: energy recovered during

deceleration and braking, used to recharge the

battery.

Remotely operable

features (Electric)

The average result for the current trip is stated in

kWh/100 km.

► You can change the displayed time scale by

pressing the - or + buttons.

These features are accessible

using a smartphone, via the

MyPeugeot application:

Deferred charge

1. Active driving mode

2. Electric motor

3. Traction battery charge level

4. Energy ﬂows

By default, charging begins immediately when

the nozzle is plugged in. The system can be

programmed to defer charging.

– Battery charge management.

– Programmed heating management.

– Consumption, charge status and driving range

statistics.

Settings

The energy ﬂows have a speciﬁc colour for each

type of driving:

► In the Electric / Energy touch screen menu,

select the Charge tab.

► Set the charging start time.

Installation procedure

A. Blue: energy consumption

B. Green: energy recovery

► Download the MyPeugeot app from the

appropriate online store for your smartphone.

► Create your user account.

► Enter your vehicle’s VIN number (code

beginning with "VF" on the vehicle registration

document).

► Press OK.

The settings are saved in the system.

You can also program the deferred charge

function using a smartphone, via the

MyPeugeot application.

Consumption statistics

The Statistics tab shows electrical energy

consumption statistics.

For more information on Identiﬁcation

markings, refer to the corresponding section.

For more information on Remotely operable

features, refer to the corresponding section.

28

Instruments

Network coverage

1

In order to be able to use the various

remotely operable features, ensure that your

vehicle is located in an area covered by the

mobile network.

A lack of network coverage may prevent

communication with the vehicle (for example,

if it is in an underground car park). In such

cases, the application will display a message

indicating that the connection with the vehicle

could not be established.

29

Instruments for Your Peugeot 208 4 Door 2020

Popular Manuals