Get Instruments -> Indicators Guide for Peugeot 208 4 Door 2020

Instruments

Have your vehicle serviced very soon.

Retrieving the service information

Indicators

The service information can be accessed

via the "Check/Diagnostics" button in the

Driving/Vehicle menu of the touch screen.

Service spanner ﬂashing

Flashing then ﬁxed, when the

ignition is switched on.

(With BlueHDi Diesel engines, combined with the

Service warning lamp.)

The servicing interval has been exceeded.

Have your vehicle serviced as soon as possible.

Service indicator

The servicing information is expressed in terms

of distance (kilometres or miles) and time

(months or days).

The alert is given at whichever of these two

terms is reached ﬁrst.

The servicing information is displayed in the

instrument panel. Depending on the version of

the vehicle:

– The distance recorder display line indicates

the distance remaining before the next service

is due, or the distance travelled since it was due

preceded by the "-" sign.

Engine oil level indicator

(Depending on version.)

On versions ﬁtted with an electric oil level

indicator, the engine oil level status is displayed

on the instrument panel for a few seconds upon

switching the ignition on, after the servicing

information.

Resetting the service indicator

The service indicator must be reset after each

service.

If you have serviced your vehicle yourself:

► Switch oﬀ the ignition.

The level read will only be correct if the

vehicle is on level ground and the engine

has been oﬀ for more than 30 minutes.

– An alert message indicates the distance

remaining, as well as the period before the next

service is due or how long it is overdue.

Oil level incorrect

This is indicated, depending on the instrument

panel, by the display of "OIL" or by the message

"Oil level incorrect", accompanied by the

lighting of the Service warning lamp and an

audible signal.

If the low oil level is conﬁrmed by a check using

the dipstick, the level must be topped up to avoid

damage to the engine.

The value indicated is calculated

according to the distance covered and

the time elapsed since the last service.

The alert may also be triggered close to a

due date.

► Press and hold the button located on the end

of the lighting control stalk.

► With no action on the brake pedal, press the

START/STOP button once; a temporary display

window appears and a countdown begins.

► When the display indicates =0, release the

lighting control stalk button; the spanner symbol

disappears.

Service spanner

For more information on Checking levels, refer

to the corresponding section.

On temporarily when the ignition is

switched on.

Between 620 and 1,860 miles (1,000 and 3,000

km) remain before the next service is due.

Fixed, when the ignition is switched on.

The next service is due in less than 620

miles (1,000 km).

Oil level indicator fault

If you disconnect the battery following

this operation, lock the vehicle and wait

at least 5 minutes for the reset to be

registered.

This is indicated, depending on the instrument

panel, by the display of "OIL_ _" or by the

message "Oil level measurement invalid",

Instruments

accompanied by the lighting of the Service

warning lamp and an audible signal.

Contact a PEUGEOT dealer or a qualiﬁed

workshop.

You must stop the vehicle as soon as it is

safe to do so.

Wait a few minutes before switching oﬀ the

engine.

It is then no longer possible to start the

engine until the minimum level of AdBlue^®has

been topped up.

In the event of a fault with the electric

indicator, the oil level is no longer

monitored.

If the system is faulty, you must check the

engine oil level using the manual dipstick

located under the bonnet.

After switching oﬀ the ignition, carefully

open the bonnet and check the coolant

level.

Manually displaying the driving range

While the driving range is greater than

1,500 miles (2,400 km), it is not displayed

automatically.

You can view the range information by

pressing the "Check / Diagnostic" button

in the touch screen’s Driving / Vehicle menu.

For more information on Checking

levels, refer to the corresponding

section.

For more information on Checking levels,

refer to the corresponding section.

Actions required related to a lack of

AdBlue^®

The following warning lamps light up when the

quantity of AdBlue^®is lower than the reserve

level corresponding to a range of 1,500 miles

(2,400 km).

Together with the warning lamps, messages

regularly remind you of the need to top up to

avoid engine starting being prevented. Refer to

the Warning and indicator lamps section for

details of the messages displayed.

AdBlue^®range indicators

(BlueHDi)

The Diesel BlueHDi engines are equipped with

a system that associates the SCR (Selective

Catalytic Reduction) emissions control system

and the Diesel particle ﬁlter (DPF) for the

treatment of exhaust gases. They cannot

function without AdBlue^®ﬂuid.

When the level of AdBlue^®falls below the

reserve level (between 1,500 and 0 miles (2,400

and 0 km)), a warning lamp lights up when

the ignition is switched on and an estimate

of the distance that can be travelled before

engine starting is prevented is displayed in the

instrument panel.

Engine coolant temperature

indicator

For more information on AdBlue^®

(BlueHDi engines), and in particular on

topping up, refer to the corresponding section.

With the engine running:

– In zone A, the temperature is correct.

– In zone B, the temperature is too high; the

associated warning lamp and the central STOP

warning lamp come on in red on the instrument

panel, accompanied by the display of a message

and an audible signal.

The engine starting prevention system

required by regulations is activated

automatically once the AdBlue^®tank is empty.

Instruments

Malfunction of the SCR emissions

control system

While driving, the message is displayed every 30

seconds. The alert is repeated when switching

on the ignition.

You can continue driving for up to 685 miles

(1,100 km) before the engine immobiliser

system is triggered.

Warning

lamps lit

Action

Remaining

driving

range

Malfunction detection

Top up.

Between

1,500 miles

and 500

miles (2,400

km and

If a malfunction is detected,

these warning lamps come on,

accompanied by an audible

signal and an "Emissions fault”

or “NO START IN” message.

Have the system checked by a

PEUGEOT dealer or a qualiﬁed

workshop as soon as possible.

800 km)

Top up as

soon as

possible.

Between

Starting prevented

The alert is triggered while driving, when the

fault is detected for the ﬁrst time, and thereafter

when switching on the ignition for subsequent

journeys, while the cause of the fault persists.

500 miles

and 62 miles

(800 km and

100 km)

Whenever the ignition is switched on, the

"Emissions fault: Starting prevented" or "NO

START IN" message is displayed.

To be able to restart the engine, contact

a PEUGEOT dealer or a qualiﬁed

workshop.

If the fault is temporary, the alert

disappears during the next journey, after

self-diagnostic checks of the SCR emissions

control system.

A top-up is

essential,

due to the

risk that the

engine will

be prevented

from starting.

Between

62 miles

and 0 miles

(100 km and

0 km)

Power indicator (Electric)

Malfunction conﬁrmed during the

permitted driving phase (between 685

miles and 0 miles (1,100 km and 0 km))

To be able

to restart

0 miles (km)

If the fault indication is still displayed

permanently after 31 miles (50 km) of driving, the

fault in the SCR system is conﬁrmed.

The AdBlue warning lamp ﬂashes, and an

"Emissions fault: Starting prevented in X

miles" or "NO START IN X miles" message is

displayed, indicating the driving range in miles or

kilometres.

the engine,

add at least

5 litres of

AdBlue^®to

its tank.

CHARGE

Traction battery charging during deceleration

and braking.

Instruments

ECO

With the ignition oﬀ, opening the driver's

door activates the indicator.

Thermal comfort

consumption indicator

(Electric)

Moderate energy consumption and optimised

driving range.

POWER

Energy consumption by the drive train during

acceleration.

NEUTRAL

On switching on the ignition, your vehicle’s

electric drive train neither consumes nor

generates energy: after sweeping over the

indicator, the needle or the cursor returns to its

"neutral" position.

Associated warning lamps

Two successive alert levels indicate that the

energy available has dropped to a low level:

1st level: Reserve

The state of charge of the traction battery

is low.

Fixed, accompanied by an audible signal.

► View the remaining range on the instrument

panel.

With the ignition oﬀ, opening the driver's

door activates the indicator, which moves

to the "neutral" position.

► Put the vehicle on charge as soon as

possible.

2nd level: Critical

The state of charge of the traction battery

is critical.

Fixed, together with the reserve warning lamp,

accompanied by an audible signal.

► You must put the vehicle on charge.

The gauge shows the consumption of electric

power for thermal comfort functions.

It concerns the following equipment and

systems:

– Heating.

– Air conditioning.

– Front demisting/defrosting.

– Rear screen demisting/defrosting.

– Heated seats.

The traction battery powers the heating and air

conditioning systems.

Charge level indicator

(Electric)

The remaining range is no longer

calculated. The drive train power

gradually decreases.

The heating and air conditioning are switched

oﬀ (even if the needle or cursor indicating

their consumption is not at the ECO position).

This equipment and these functions can be

used:

– If the vehicle is not plugged in, when the

READY lamp is lit.

– If the vehicle is plugged in, when the ignition is

switched on.

Selecting Eco mode limits the performance of

some equipment. The needle or cursor on the

The traction battery charge status and remaining

range are displayed continuously when the

vehicle is started.

Instruments

thermal comfort consumption indicator then

moves into the "ECO" zone.

This information is also displayed

automatically every time the ignition is

switched on.

With BLUETOOTH touch

screen audio system

To quickly heat or cool the passenger

compartment, feel free to temporarily

select the maximum heating or cooling

setting.

Excessive use of thermal comfort equipment,

particularly at low speed, can signiﬁcantly

decrease the vehicle's range.

Remember to optimise equipment settings

upon achieving the desired level of comfort,

and adjust them if necessary whenever you

start the vehicle.

After an extended period without using the

heating, you may notice a slight odour during

the ﬁrst few minutes of use.

► Press on the Settings menu.

► Select "Display".

Total distance recorder

The total distance recorder measures the total

distance travelled by the vehicle since its initial

registration.

With the ignition on, the total distance is

displayed at all times. It remains displayed for

30 seconds after switching oﬀ the ignition. It is

displayed when the driver's door is opened, and

when the vehicle is locked or unlocked.

► Adjust the brightness by

pressing the buttons.

You can also switch oﬀ the screen:

► Select "Turn oﬀ screen".

The screen goes oﬀ completely.

► Press the screen again (anywhere on its

surface) to activate it.

When travelling abroad, you may have to

change the distance units (km or miles):

the road speed must be displayed in the local

country’s oﬃcial unit (km/h or mph).

The unit is changed via the screen

conﬁguration menu, with the vehicle

stationary.

With PEUGEOT Connect

Radio

► Press this button to select the

Settings menu.

► Select "Brightness".

Manual test

This function allows you to check certain

indicators and display the alerts log.

It can be accessed via the "Diagnostic /

Check" button in the Driving / Vehicle

touch screen menu.

► Adjust the brightness by pressing the

arrows or moving the slider.

Lighting dimmer

This system allows the brightness of the

instruments and controls to be adjusted to suit

the ambient light level.

The settings are applied immediately.

► Press outside the settings window to exit.

You can also switch oﬀ the screen:

► Press this button to select the

Settings menu.

The following information is displayed on the

instrument panel:

– Engine oil level.

– Next service due.

– Tyre pressures.

► Select "Dark".

– Driving range associated with the AdBlue and

the SCR system (BlueHDi Diesel).

– Active alerts.

The screen goes oﬀ completely.

Instruments -> Indicators for Your Peugeot 208 4 Door 2020

Popular Manuals