Lighting and visibility -> Headlamp beam height adjustment for Your Peugeot 208 4 Door 2020

Lighting and visibility  
the instrument panel, accompanied by an  
audible signal and/or the display of a message.  
Contact a PEUGEOT dealer or a qualified  
workshop.  
In the event of a malfunction, this warning  
lamp comes on on the instrument panel,  
accompanied by the display of a message and  
an audible signal.  
Headlamp beam height  
adjustment  
4
The system then places the headlamp beams in  
the lowest position.  
Have the system checked by a PEUGEOT  
dealer or a qualified workshop.  
Manual headlamp  
adjustment  
Do not cover the rain/sunshine sensor  
located at the top centre of the  
windscreen behind the interior rear view  
mirror; the associated functions would no  
longer be controlled.  
Do not touch the "Full LED" technology  
headlamps - risk of electrocution!  
In fog or snow, the rain/sunshine sensor  
may detect sufficient light. In this case,  
the lighting will not come on automatically.  
Automatic illumination of  
headlamps  
To avoid causing a nuisance to other road users,  
the height of these headlamp beams should be  
adjusted according to the load in the vehicle.  
When the ring is at the "AUTO" position and  
a low level of ambient light is detected by  
the rain/sunshine sensor, the number plate  
lamps, sidelamps and dipped beam headlamps  
are switched on automatically, without any action  
on the part of the driver. They can also come on  
if rain is detected, at the same time as automatic  
operation of the windscreen wipers.  
Guide-me-home and  
welcome lighting  
0
(Initial setting)  
Driver only or driver + front passenger  
5 people  
5 people + load in the boot  
Driver only + load in the boot  
Guide-me-home lighting  
Automatic  
1
2
3
With the ring in the "AUTO" position, when the  
light is poor, the dipped beam headlamps come  
on automatically when the ignition is switched  
off.  
You can activate/deactivate this  
function and adjust the guide-me-  
home lighting duration in the Driving / Vehicle  
touch screen menu.  
4 5 6 Not used  
As soon as the brightness returns to a sufficient  
level or after the windscreen wipers are switched  
off, the lamps are switched off automatically.  
Automatic adjustment of  
the Full LED technology  
headlamps  
This system automatically adjusts the height of  
the headlamp beams according to the load in the  
vehicle.  
Malfunction  
In the event of a malfunction of the rain/  
sunshine sensor, the vehicle’s lighting  
comes on and this warning lamp is displayed in  
59