Get PEUGEOT Connect Radio Guide for Peugeot 208 4 Door 2020

PEUGEOT Connect Radio

applications interrupt their display while the

vehicle is moving).

– Changing the system settings and

conﬁguration.

At all times it is possible to display the rolling

menus by pressing the screen brieﬂy with three

ﬁngers.

All of the touch areas of the screen are white.

For pages with multiple tabs at the bottom of the

screen, it is possible to switch between pages

either by tapping the tab for the desired page, or

by using a ﬁnger, sliding the pages to the left or

to the right.

PEUGEOT Connect

Radio

11

The system is protected in such a way

that it will only operate in the vehicle.

The Energy Economy Mode message is

displayed when the system is about to enter

the corresponding mode.

Press in the grey zone to go back up a level or

to conﬁrm.

Press the back arrow to go back a level or

conﬁrm.

The system’s Open Source Software

(OSS) source codes are available at the

following addresses:

https://www.groupe-psa.com/fr/oss/

https://www.groupe-psa.com/en/oss/

The touch screen is of the "capacitive"

type.

To clean the screen, use a soft, non-abrasive

cloth (e.g. spectacles cloth) with no additional

product.

Multimedia audio system -

Applications - Bluetooth^®

telephone

Do not use sharp objects on the screen.

Do not touch the screen with wet hands.

First steps

The functions and settings described

vary according to the vehicle version and

conﬁguration.

With the engine running, a press mutes

the sound.

Certain information is displayed permanently in

the upper bar of the touch screen:

– Air conditioning status information (depending

on version), and direct access to the

corresponding menu.

– Radio Media and Telephone menu status

information.

– Privacy status information.

– Access to the touch screen and digital

instrument panel settings.

Audio source selection (depending on

equipment):

With the ignition oﬀ, a press turns the system on.

Increase or decrease the volume using

the wheel or the "plus" or "minus" buttons

(depending on the equipment).

Use the buttons on either side of or below the

touch screen for access to the menus, then

press the virtual buttons in the touch screen.

Depending on the model, use the "Source" or

"Menu" buttons on the left of the touch screen

for access to the menus, then press the virtual

buttons in the touch screen.

For safety reasons and because they

require sustained attention by the driver,

the following operations must be carried out

with the vehicle stationary and the ignition

on:

– Pairing the smartphone with the system in

Bluetooth mode.

– Using the smartphone.

– Connection to the CarPlay^®, MirrorLink^TM

or Android Auto applications (certain

199

PEUGEOT Connect Radio

– FM/DAB/AM radio stations (depending on

equipment).

– Telephone connected via Bluetooth and

Bluetooth multimedia broadcast (streaming).

– USB Memory stick.

Steering mounted controls -

Type 2

Steering mounted controls

Steering mounted controls -

Type 1

– Media player connected via the auxiliary

socket (depending on equipment).

Voice commands:

This control is located on the steering

wheel or at the end of the lighting control stalk

(depending on equipment).

Short press, smartphone voice commands via

the system.

Radio:

Select the previous/next preset radio

station.

Select the previous/next item in a menu or a list.

Media:

Increase volume.

Select the previous/next track.

Select the previous/next item in a menu or a list.

Radio:

Short press: display the list of radio

stations.

Decrease volume.

Mute by pressing the volume increase

and decrease buttons simultaneously

(depending on equipment).

Restore the sound by pressing one of the two

volume buttons.

Long press: update the list.

Media:

In the "Settings" menu, it is possible to

create a proﬁle for an individual or for a

group of people with shared interests, and

conﬁgure a wide range of settings (radio

presets, audio settings, ambiences, etc.).

Settings are applied automatically.

Media (short press): change the

multimedia source.

Telephone (short press): start telephone

call.

Short press: display the list of folders.

Long press: display the available sorting options.

Change audio source (radio; USB; AUX if

equipment connected; CD; streaming).

Conﬁrm a selection.

Call in progress (short press): access

telephone menu.

Telephone (long press): reject an incoming call,

end call; when no call is in progress, access

telephone menu.

Radio (rotate): automatic search for the

previous/next station.

Media (rotate): previous/next track, move in a

list.

In very hot conditions, the volume may

be limited to protect the system. It may

enter standby mode (with the screen and

sound oﬀ) for 5 minutes or more.

The system will resume normal operation

when the temperature in the passenger

compartment has dropped.

Increase volume.

Decrease volume.

Mute/restore sound by simultaneously

pressing the increase and decrease

volume buttons.

200

PEUGEOT Connect Radio

Short press: conﬁrm a selection; if nothing

selected, access to presets.

Radio: display the list of stations.

Media: display the list of tracks.

Radio (press and hold): update the list of

stations received.

Radio Media

Settings

11

Menus

Applications

Select an audio source or radio station.

Conﬁgure a personal proﬁle and/or

conﬁgure the sound (balance, ambience,

etc.) and the display (language, units, date, time,

etc.).

Telephone

Driving

Access conﬁgurable equipment.

Connect a mobile phone via Bluetooth^®.

Run certain applications on a smartphone

connected via MirrorLink^TM, CarPlay^®or Android

Auto.

Activate, deactivate or conﬁgure certain

vehicle functions.

201

PEUGEOT Connect Radio

Press this button to search and select a

recipient.

Navigation

Applications

Select the "Quick messages” tab.

Viewing photos

Insert a USB memory stick in the USB port.

Press this button to select the display

settings for messages.

Press this button to write a new message.

To protect the system, do not use a USB

hub.

The system can read folders and image ﬁles in

the formats: .tiﬀ; .gif; .jpg/jpeg; .bmp and .png.

Press Applications to display the main

page.

Press the bin alongside the selected

message to delete it.

Press this button alongside the selected

message to display the secondary page.

Press this button to edit and modify the

existing text.

Conﬁgure the navigation and select your

destination via MirrorLink^TM, CarPlay^®or

Android Auto.

Press "Photos".

Select a folder.

Press this button to write a new message.

Air conditioning

Select an image to view.

Press the bin to delete the message.

Press this button to display the details of

the photo.

Press the back arrow to go back a level.

Radio

18,5

21,5

Selecting a station

Managing messages

Press Radio Media to display the main

page.

Press Applications to display the main

Press one of the buttons to perform an

automatic search for radio stations.

Or

page.

Press "SMS".

Manage various temperature and air ﬂow

Move the slider to manually search for

frequencies up or down.

Or

Select the "SMS” tab.

settings.

Press this button to select the display

settings for messages.

Press the frequency.

202

PEUGEOT Connect Radio

Enter the FM and AM waveband values

using the virtual keypad.

Press "OK" to conﬁrm.

Or

Press the "OPTIONS" button to access the

secondary page.

11

Select a radio station or frequency.

Press "Preset".

Activate/deactivate "News".

Make a long press on one of the buttons

to preset the station.

Press in the shaded area to conﬁrm.

Radio reception may be aﬀected by the

use of electrical equipment not approved

by the Brand, such as a USB charger

connected to the 12 V socket.

The exterior environment (hills, buildings,

tunnels, basement car parks, etc.) may

block reception, including in RDS mode.

This phenomenon is perfectly normal in the

context of radio wave transmission, and

in no way indicative of an audio system

malfunction.

Activating/Deactivating RDS

Playing TA messages

RDS, if activated, allows you to continue

listening to the same station by automatically

retuning to alternative frequencies.

Press Radio Media to display the main

page.

The TA (Traﬃc Announcement) function gives

priority to TA alert messages. To operate, this

function needs good reception of a radio station

that transmits this type of message. While traﬃc

information is being broadcast, the current

media is automatically interrupted so that the

TA message can be heard. Normal play of the

previously playing media resumes at the end of

the message.

Press the "OPTIONS" button to access the

secondary page.

Activate/deactivate "RDS".

Press in the shaded area to conﬁrm.

Changing the waveband

Press Radio Media to display the main

page.

Press the "OPTIONS" button to access the

secondary page.

Press Radio Media to display the main

page.

RDS station tracking may not be

available nationwide, as many radio

stations do not cover 100 % of the country.

This explains the loss of reception of the

station during a journey.

Press the "OPTIONS" button to access the

secondary page.

Activate/deactivate "TA".

Press "Band" to change waveband.

Press in the shaded area to conﬁrm.

Displaying text information

Audio settings

The "Radio Text" function displays information

transmitted by the radio station relating to the

station or the currently playing song.

Press Radio Media to display the main

page.

Presetting a station

Press Radio Media to display the main

page.

Select a radio station or frequency.

Make a short press on the star outline. If

the star is solid, the radio station is

already preset.

Press the "OPTIONS" button to access the

secondary page.

Press "Audio settings".

203

PEUGEOT Connect Radio

Select the "Tone", "Balance", "Sound",

"Voice" or "Ringtones" tab to conﬁgure

the sound settings.

Press in the shaded area to conﬁrm.

DAB (Digital Audio

Broadcasting) radio

Terrestrial Digital Radio

If "FM-DAB Follow-up" is activated, there

may be a time oﬀset of a few seconds

Press the back arrow to conﬁrm.

when the system switches to "FM" analogue

radio, and in some cases a change in volume.

When the digital signal quality is restored, the

system automatically changes back to "DAB".

In the "Tone" tab, the Ambience, Bass,

Medium and Treble sound settings are

diﬀerent and independent for each audio

source.

In the "Balance” tab, the All passengers,

Driver and Front only settings are common

to all sources.

In the "Sound” tab, activate or deactivate

"Volume linked to speed", "Auxiliary input"

and "Touch tones".

Terrestrial Digital Radio

Digital radio provides higher quality sound.

The various "multiplexes/ensembles" oﬀer a

choice of radio stations organised in alphabetical

order.

If the "DAB" station being listened to is

not available on "FM", or if "FM-DAB

Follow-up" is not activated, the sound will cut

out while the digital signal is too weak.

Press Radio Media to display the main

page.

Press the "OPTIONS" button to access the

secondary page.

Press "Band" to select "DAB band".

Media

The balance/distribution (or spatialisation

with the Arkamys^©system) uses audio

processing to adjust the sound quality

according to the number of passengers in the

vehicle.

Press in the shaded area to conﬁrm.

USB port

Insert the USB memory stick into the USB

port or connect the USB device to the

FM-DAB Follow-up

"DAB" does not cover 100 % of the country.

When the digital radio signal is poor, the

"FM-DAB Follow-up" enables you to continue

listening to the same station by automatically

switching to the corresponding "FM" analogue

station (if there is one).

USB port using a suitable cable (not supplied).

Onboard audio: Arkamys Sound Staging^©

optimises the sound distribution inside

the passenger compartment.

To protect the system, do not use a USB

hub.

The system builds playlists (in temporary

memory); this operation can take from a

few seconds to several minutes at the ﬁrst

connection.

Reduce the number of non-music ﬁles and the

number of folders to reduce the waiting time.

Press Radio Media to display the main

page.

Press the "OPTIONS" button to access the

secondary page.

Activate/deactivate "FM-DAB Follow-up".

204

PEUGEOT Connect Radio

Playlists are updated whenever the ignition

is switched oﬀ or a USB memory stick is

connected. The audio system memorises these

lists, which will subsequently load faster if they

have not been changed.

If play does not start automatically, it may be

necessary to start the audio playback from the

smartphone.

Control is from the portable device or by using

the system's touch buttons.

Information and advice

11

The system supports USB mass storage

devices, BlackBerry^®devices or Apple^®players

via the USB ports. The adapter cable is not

supplied.

Devices are managed using the audio system

controls.

Other devices, not recognised on connection,

must be connected to the auxiliary socket using

a jack cable (not supplied) or via Bluetooth

streaming, if compatible.

Once connected in Streaming mode, the

smartphone is considered to be a media

source.

Auxiliary (AUX) jack socket

Depending on equipment

Connect a portable device (MP3 player,

etc.) to the auxiliary jack socket using an

audio cable (not supplied).

This source is only available if "Auxiliary input"

has been selected in the audio settings.

First adjust the volume on the portable device

(to a high level). Then adjust the volume of the

audio system.

Connecting Apple^®players

Connect the Apple^®player to the USB socket

using a suitable cable (not supplied).

Play starts automatically.

To protect the system, do not use a USB

hub.

Control is via the audio system.

The audio system will only play audio ﬁles with

".wav", ".wma", ".aac", ".ogg" and ".mp3" ﬁle

extensions, at bit rates between 32 Kbps and

320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other ﬁle types (".mp4", etc.) can be read.

All ".wma" ﬁles must be standard WMA 9 ﬁles.

The supported sampling rates are 11, 22, 44 and

48 KHz.

To avoid reading and display problems, we

recommend choosing ﬁle names less than 20

characters long that do not contain any special

characters (e.g. “ ? . ; ù).

Use only USB memory sticks in FAT32 format

(File Allocation Table).

The classiﬁcations available are those of

the portable device connected (artists/

albums/genres/playlists/audio books/

podcasts). It is also possible to use a

classiﬁcation structured in the form of a

library.

The default classiﬁcation used is by artist. To

modify the classiﬁcation used, return to the

ﬁrst level of the menu then select the desired

classiﬁcation (playlists for example) and

conﬁrm to go down through the menu to the

desired track.

Controls are managed via the portable device.

Selecting the source

Press Radio Media to display the main

page.

Press the "SOURCES" button.

Select the source.

BluetoothStreaming^®

Streaming allows you to listen to the audio feed

from your smartphone.

The Bluetooth proﬁle must be activated.

First adjust the volume on the portable device

(to a high level). Then adjust the volume of the

system.

The version of software in the audio system may

not be compatible with the generation of the

Apple^®player.

We recommend using the original USB

cable for the portable device.

205

PEUGEOT Connect Radio

Press "MirrorLink^TM" to start the

application in the system.

MirrorLink^TMsmartphone

connection

Telephone

USB sockets

Once the connection is established, a page is

displayed, showing the applications already

downloaded to the smartphone that are

compatible with MirrorLink^TMtechnology.

Access to the diﬀerent audio sources remains

available in the margin of the MirrorLink^TM

display, using the touch buttons located in the

upper bar.

The "MirrorLink^TM" function requires a

compatible smartphone and applications.

Depending on equipment, for more information

on the USB sockets compatible with the

CarPlay^®, MirrorLink^TMor Android Auto

applications, refer to the "Ease of use and

comfort" section.

Telephone not connected by

Bluetooth^®

When connecting a smartphone to the

system, we recommend enabling

Bluetooth^®on the smartphone.

The synchronisation of a smartphone

allows users to display applications

Access to the menus for the system is possible

at any time using the dedicated buttons.

adapted to the CarPlay^®, MirrorLink^TMor

Android Auto technology of the smartphone

on the vehicle screen. For the CarPlay^®

technology, the CarPlay^®function must be

activated on the smartphone beforehand.

For the communication process between

the smartphone and the system to work, it is

essential in all cases that the smartphone is

unlocked.

Connect a USB cable. The smartphone

charges when connected by a USB cable.

From the system, press "Telephone" to

display the main page.

Press "MirrorLink^TM" to start the

application in the system.

There may be a pause before

applications become available,

depending on the quality of the network.

CarPlay^®smartphone

connection

Connect a USB cable. The smartphone

charges when connected by a USB cable.

From the system, press Telephone to

display the CarPlay^®interface.

Or

Depending on the smartphone, it may be

necessary to activate the "MirrorLink^TM

"

As the principles and standards are

function.

constantly changing, it is recommended

that you keep the smartphone's operating

system up-to-date, as well as the date and

time of the smartphone and of the system.

For the list of eligible smartphones, go to the

Brand's national website.

During the procedure, several screen

pages relating to certain features are

displayed.

Accept to start and complete the connection.

If the smartphone has already connected

by Bluetooth^®.

Connect a USB cable. The smartphone

charges when connected by a USB cable.

From the system, press "Telephone" to

display the main page.

Telephone connected by Bluetooth^®

Connect a USB cable. The smartphone

charges when connected by a USB cable.

From the system, press "Telephone" to

display the main page.

Press the "PHONE" button to access the

secondary page.

Press the "PHONE" button to display the

secondary page.

206

PEUGEOT Connect Radio

Press "CarPlay" to display the CarPlay^®

interface.

Press "Android Auto" to start the

application in the system.

Depending on the smartphone, it may be

necessary to activate the "Android Auto"

function.

During the procedure, several screen

pages relating to certain features are

displayed.

Accept to start and complete the connection.

When connecting a smartphone to the

system, we recommend enabling

Bluetooth^®on the smartphone.

Pairing a Bluetooth^®

telephone

11

On connecting the USB cable, the

CarPlay^®function deactivates the

system's Bluetooth^®mode.

The services available depend on the

network, the SIM card and the

compatibility of the Bluetooth devices used.

Consult the telephone user guide and the

service provider to check which services are

available.

When the USB cable is disconnected

and the ignition is switched oﬀ then back

on, the system will not automatically switch to

Radio Media mode; the source must be

changed manually.

The Bluetooth function must be activated

and the telephone conﬁgured as "Visible

to all” (in the telphone settings).

The CarPlay^®navigation can be accessed

at any time by pressing the system's

Navigation button.

Telephone connected by Bluetooth^®

From the system, press "Telephone" to

display the main page.

Press the "PHONE" button to display the

secondary page.

Press "Android Auto" to start the

application in the system.

Access to the diﬀerent audio sources remains

available in the margin of the Android Auto

display, using the touch buttons located in the

upper bar.

To complete the pairing, whichever procedure is

used (from the telephone or from the system),

ensure that the code is the same in the system

and in the telephone.

Android Auto smartphone

connection

If the pairing procedure fails, we

recommend deactivating and then

reactivating the Bluetooth function on the

telephone.

On the smartphone, download the

Android Auto application.

The "Android Auto" function requires the

use of a compatible smartphone and

applications.

Access to the menus for the system is possible

at any time using the dedicated buttons.

Procedure from the telephone

Select the name of the system in the list

of detected devices.

In the system, accept the connection request

from the telephone.

Telephone not connected by

Bluetooth^®

There may be a pause before

applications become available,

depending on the quality of the network.

Connect a USB cable. The smartphone

charges when connected by a USB cable.

From the system, press "Telephone" to

display the main page.

207

PEUGEOT Connect Radio

Procedure from the system

Visit the Brand's website for more information

(compatibility, additional help, etc.).

Press on the name of the telephone

selected in the list to disconnect it.

Press again to connect it.

Press Telephone to display the main

page.

Press "Bluetooth search".

The list of detected telephones is

displayed.

Automatic reconnection

Deleting a telephone

On returning to the vehicle, if the last telephone

connected is present again, it is automatically

recognised and within about 30 seconds

after switching on the ignition, the pairing is

established automatically (Bluetooth activated).

To modify the connection proﬁle:

Press Telephone to display the main

page.

Press the basket at the top right of the

screen to display a basket alongside the

telephone chosen.

Select the name of the chosen telephone

in the list.

Press the basket alongside the telephone

chosen to delete it.

Connection sharing

The system oﬀers to connect the telephone with

3 proﬁles:

– "Telephone" (hands-free kit, telephone only),

– “Streaming" (streaming: wireless playing of

audio ﬁles on the telephone),

Receiving a call

Press the "PHONE" button to access the

secondary page.

An incoming call is announced by a ring and a

superimposed display in the screen.

Make a short press on the steering

mounted PHONE button to accept an

incoming call.

Press "Bluetooth connection" to

display the list of paired devices.

Press the "Details" button for a paired

device.

– "Mobile internet data".

Select one or more proﬁles.

And

Select one or more proﬁles.

Make a long press

Press "OK" to conﬁrm.

on the steering mounted PHONE button

to reject the call.

Or

Depending on the type of telephone, you may by

prompted to accept the transfer of contacts and

messages.

Managing paired telephones

This function lets you connect or disconnect a

device or delete a pairing.

Press Telephone to display the main

page.

Press the "PHONE" button to access the

secondary page.

Press "End call".

The ability of the system to connect just

one proﬁle depends on the telephone.

All three proﬁles may connect by default.

Making a call

Using the telephone is not recommended

while driving.

Parking the vehicle.

Make the call using the steering mounted

controls.

The proﬁles compatible with the system

are: HFP, OPP, PBAP, A2DP, AVRCP,

MAP and PAN.

Press "Bluetooth connection" to

display the list of paired devices.

208

PEUGEOT Connect Radio

Calling a new number

It is always possible to make a call

directly from the telephone; as a safety

measure, ﬁrst park the vehicle.

Press the back arrow again to conﬁrm.

11

Press Telephone to display the main

page.

Enter the phone number using the digital

keypad.

Press this button to reset the selected

proﬁle.

Setting the ringtone

Adjusting the brightness

Press "Call" to start the call.

Press Telephone to display the main

page.

Press Settings to display the main page.

Press the "OPTIONS" button to access the

secondary page.

Calling a contact

Press Brightness.

Press Telephone to display the main

page.

Press "Ring volume" to display the

volume bar.

Press the arrows or move the slider to set

the ring volume.

Move the slider to adjust the brightness of

the screen and/or the instrument panel

(depending on version).

Or press and hold

Press in the shaded area to conﬁrm.

the steering mounted PHONE button.

Press "Contacts".

Select the desired contact from the displayed list.

Press "Call".

Settings

Modifying system settings

Press Settings to display the main page.

Conﬁguring proﬁles

Press Settings to display the main page.

Press "Conﬁguration" to access the

secondary page.

Press "System conﬁguration".

Calling a recently used

number

Press "Proﬁles".

Press Telephone to display the main

Select "Proﬁle 1", "Proﬁle 2", "Proﬁle 3” or

"Common proﬁle".

Press the "Units" tab to change the units of

distance, fuel consumption and temperature.

Press the "Factory settings" tab to restore the

initial settings.

page.

Or

Press this button to enter a name for the

proﬁle using the virtual keypad.

Press "OK" to save.

Press and hold

Returning the system to factory settings

activates the English language by default

(depending on version).

the steering mounted button.

Press the back arrow to conﬁrm.

Press "Recent calls".

Select the desired contact from the displayed list.

Press this button to activate the proﬁle.

209

PEUGEOT Connect Radio

Press the "System info" tab to display the

versions of the various modules installed in the

system.

Press the "Privacy" tab,

or

Press the back arrow to conﬁrm.

Press the back arrow to save the settings.

The system may not automatically

manage the change between winter and

summer time (depending on the country of

sale).

Selecting the language

Press Settings to display the main page.

Press "Conﬁguration" to access the

secondary page.

Select "Language" to change the

language.

Press "Privacy" to activate or deactivate

the private data mode.

Activate or deactivate:

Setting the date

Press Settings to display the main page.

Press the back arrow to conﬁrm.

– "No sharing (data, vehicle position)".

– "Only data sharing”

– "Data and vehicle position sharing"

Press the back arrow to conﬁrm.

Press "Conﬁguration" to access the

secondary page.

Press "Date and time".

Setting the time

Press Settings to display the main page.

Select "Date".

Press Settings to display the main page.

Press "Conﬁguration" to access the

secondary page.

Press this button to set the date.

Press "Conﬁguration" to access the

secondary page.

Press "Screen conﬁguration".

Press "Date and time".

Press the back arrow to save the date.

Select the display format for the date.

Press the back arrow again to conﬁrm.

Select "Time".

Press this button to set the time using the

virtual keypad.

Press "Brightness".

Move the slider to adjust the brightness of

the screen and/or the instrument panel

(depending on version).

Press "OK" to save the time.

Time and date setting is only available if

"GPS Synchronisation:" is deactivated.

Press this button to set the time zone.

Press the back arrow to conﬁrm.

Select the display format for the time

(12h/24h).

Activate or deactivate summer time (+1

hour).

Press "Animation".

Activate or deactivate: “Automatic

scrolling”.

Select "Animated transitions".

Activate or deactivate GPS

synchronisation (UTC).

210

PEUGEOT Connect Radio

► Press the round arrow on the "List" tab on the

"Radio" page.

Some radio stations send other information

in place of their name (the title of the song for

example).

The system interprets these details as the station

name.

► Press the round arrow on the "List" tab on the

"Radio" page.

The Bluetooth proﬁle does not allow the transfer

of this information.

Frequently asked

questions

11

Telephone

The following information groups together the

answers to the most frequently asked questions

concerning the system.

I cannot connect my Bluetooth telephone.

The telephone's Bluetooth function may be

switched oﬀ or the telephone may not be visible.

► Check that the telephone has Bluetooth

switched on.

Radio

The reception quality of the tuned radio

station gradually deteriorates or the station

presets are not working (no sound, 87.5 MHz

is displayed, etc.).

► Check in the telephone settings that it is

"visible to all".

The Bluetooth telephone is not compatible with

the system.

► Check the compatibility of the telephone on

the Brand's website (services).

Android Auto and CarPlay do not work.

Android Auto and CarPlay may not activate if the

USB cables are of poor quality.

► Use genuine USB cables to ensure

compatibility.

The volume of the telephone connected in

Bluetooth mode is inaudible.

The volume depends on both the system and the

telephone.

► Increase the volume of the audio system, to

maximum if required, and increase the volume of

the telephone if necessary.

Media

Playback of my USB memory stick starts only

after a very long wait (around 2 to 3 minutes).

Some ﬁles supplied with the memory stick may

greatly slow down access to reading the memory

stick (multiplication by 10 of the cataloguing

time).

The vehicle is too far from the selected station’s

transmitter, or no transmitter is present in the

geographical area.

► Activate the "RDS" function in the upper bar

to enable the system to check whether there is

a more powerful transmitter in the geographical

area.

The environment (hills, buildings, tunnels,

basement car parks, etc.) is blocking reception,

including in RDS mode.

This is a perfectly normal phenomenon, and is

not indicative of an audio system malfunction.

The aerial is missing or has been damaged

(for example while entering a car wash or

underground car park).

► Delete the ﬁles supplied with the memory

stick and limit the number of sub-folders in the

ﬁle structure on the memory stick.

Some characters in information about the

currently playing media are not displayed

correctly.

The audio system is unable to process certain

types of character.

► Use standard characters to name tracks and

folders.

Playback of streaming ﬁles does not start.

The connected device does not automatically

launch playback.

► Start playback from the device.

Track names and playing times are not

displayed on the audio streaming screen.

Ambient noise aﬀects the quality of the

telephone call.

► Reduce ambient noise (close windows,

reduce ventilation, slow down, etc.).

The contacts are not listed in alphabetical

order.

► Have the aerial checked by a dealer.

I cannot ﬁnd some radio stations in the list of

received stations.

The name of the radio station changes.

The station is no longer received or its name has

changed in the list.

211

PEUGEOT Connect Radio

Some telephones oﬀer display options.

Depending on the settings chosen, contacts can

be transferred in a speciﬁc order.

► Modify the telephone directory display

settings.

When the engine is oﬀ, the system switches

oﬀ after several minutes of use.

When the engine is switched oﬀ, the system's

operating time depends on the state of charge of

the battery.

The switch-oﬀ is normal: the system

automatically goes into energy economy mode

and switches oﬀ to maintain an adequate charge

in the battery.

► Start the vehicle’s engine to increase the

charge of the battery.

Settings

When the treble and bass settings are

changed, the ambience is deselected.

When the ambience is changed, the treble

and bass settings are reset.

Selecting an ambience imposes the treble and

bass settings, and vice versa.

► Modify the treble and bass or ambience

settings to obtain the desired musical ambience.

When the balance settings are changed, the

distribution is deselected.

When the distribution setting is changed, the

balance settings are deselected.

Selecting a distribution setting imposes the

balance settings, and vice versa.

► Modify the balance setting or the distribution

setting to obtain the desired sound quality.

There is a diﬀerence in sound quality

between audio sources.

To allow for optimal listening quality, the sound

settings can be tailored to diﬀerent audio

sources, which can generate audible diﬀerences

when changing source.

► Check that the sound settings are appropriate

to the sources listened to. Adjust the sound

functions to the middle position.

212

PEUGEOT Connect Radio for Your Peugeot 208 4 Door 2020

Popular Manuals