PEUGEOT Connect Radio -> Media for Your Peugeot 208 4 Door 2020

PEUGEOT Connect Radio  
Select the "Tone", "Balance", "Sound",  
"Voice" or "Ringtones" tab to configure  
the sound settings.  
Press in the shaded area to confirm.  
DAB (Digital Audio  
Broadcasting) radio  
Terrestrial Digital Radio  
If "FM-DAB Follow-up" is activated, there  
may be a time offset of a few seconds  
Press the back arrow to confirm.  
when the system switches to "FM" analogue  
radio, and in some cases a change in volume.  
When the digital signal quality is restored, the  
system automatically changes back to "DAB".  
In the "Tone" tab, the Ambience, Bass,  
Medium and Treble sound settings are  
different and independent for each audio  
source.  
In the "Balance” tab, the All passengers,  
Driver and Front only settings are common  
to all sources.  
In the "Sound” tab, activate or deactivate  
"Volume linked to speed", "Auxiliary input"  
and "Touch tones".  
Terrestrial Digital Radio  
Digital radio provides higher quality sound.  
The various "multiplexes/ensembles" offer a  
choice of radio stations organised in alphabetical  
order.  
If the "DAB" station being listened to is  
not available on "FM", or if "FM-DAB  
Follow-up" is not activated, the sound will cut  
out while the digital signal is too weak.  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
Press "Band" to select "DAB band".  
Media  
The balance/distribution (or spatialisation  
with the Arkamys© system) uses audio  
processing to adjust the sound quality  
according to the number of passengers in the  
vehicle.  
Press in the shaded area to confirm.  
USB port  
Insert the USB memory stick into the USB  
port or connect the USB device to the  
FM-DAB Follow-up  
"DAB" does not cover 100 % of the country.  
When the digital radio signal is poor, the  
"FM-DAB Follow-up" enables you to continue  
listening to the same station by automatically  
switching to the corresponding "FM" analogue  
station (if there is one).  
USB port using a suitable cable (not supplied).  
Onboard audio: Arkamys Sound Staging©  
optimises the sound distribution inside  
the passenger compartment.  
To protect the system, do not use a USB  
hub.  
The system builds playlists (in temporary  
memory); this operation can take from a  
few seconds to several minutes at the first  
connection.  
Reduce the number of non-music files and the  
number of folders to reduce the waiting time.  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
Activate/deactivate "FM-DAB Follow-up".  
204  
PEUGEOT Connect Radio  
Playlists are updated whenever the ignition  
is switched off or a USB memory stick is  
connected. The audio system memorises these  
lists, which will subsequently load faster if they  
have not been changed.  
If play does not start automatically, it may be  
necessary to start the audio playback from the  
smartphone.  
Control is from the portable device or by using  
the system's touch buttons.  
Information and advice  
11  
The system supports USB mass storage  
devices, BlackBerry® devices or Apple® players  
via the USB ports. The adapter cable is not  
supplied.  
Devices are managed using the audio system  
controls.  
Other devices, not recognised on connection,  
must be connected to the auxiliary socket using  
a jack cable (not supplied) or via Bluetooth  
streaming, if compatible.  
Once connected in Streaming mode, the  
smartphone is considered to be a media  
source.  
Auxiliary (AUX) jack socket  
Depending on equipment  
Connect a portable device (MP3 player,  
etc.) to the auxiliary jack socket using an  
audio cable (not supplied).  
This source is only available if "Auxiliary input"  
has been selected in the audio settings.  
First adjust the volume on the portable device  
(to a high level). Then adjust the volume of the  
audio system.  
Connecting Apple® players  
Connect the Apple® player to the USB socket  
using a suitable cable (not supplied).  
Play starts automatically.  
To protect the system, do not use a USB  
hub.  
Control is via the audio system.  
The audio system will only play audio files with  
".wav", ".wma", ".aac", ".ogg" and ".mp3" file  
extensions, at bit rates between 32 Kbps and  
320 Kbps.  
It also supports VBR (Variable Bit Rate) mode.  
No other file types (".mp4", etc.) can be read.  
All ".wma" files must be standard WMA 9 files.  
The supported sampling rates are 11, 22, 44 and  
48 KHz.  
To avoid reading and display problems, we  
recommend choosing file names less than 20  
characters long that do not contain any special  
characters (e.g. “ ? . ; ù).  
Use only USB memory sticks in FAT32 format  
(File Allocation Table).  
The classifications available are those of  
the portable device connected (artists/  
albums/genres/playlists/audio books/  
podcasts). It is also possible to use a  
classification structured in the form of a  
library.  
The default classification used is by artist. To  
modify the classification used, return to the  
first level of the menu then select the desired  
classification (playlists for example) and  
confirm to go down through the menu to the  
desired track.  
Controls are managed via the portable device.  
Selecting the source  
Press Radio Media to display the main  
page.  
Press the "SOURCES" button.  
Select the source.  
BluetoothStreaming®  
Streaming allows you to listen to the audio feed  
from your smartphone.  
The Bluetooth profile must be activated.  
First adjust the volume on the portable device  
(to a high level). Then adjust the volume of the  
system.  
The version of software in the audio system may  
not be compatible with the generation of the  
Apple® player.  
We recommend using the original USB  
cable for the portable device.  
205