Access
Triggering
Locking the vehicle without
activating the alarm
Locking the vehicle with
2
This is indicated by sounding of the siren
and flashing of the direction indicators for
approximately thirty seconds.
After it has been triggered, the alarm is again
operational.
exterior protection alarm only
F
Lock or deadlock the vehicle using the key
in the driver's door lock.
Deactivation of the interior
volumetric protection
The direction indicators do not come on.
F
F
Switch off the ignition.
Within ten seconds, press button A until
the indicator lamp is on continuously.
Get out of the vehicle.
Lock or deadlock the vehicle using the
locking button on the remote control.
If the alarm is triggered ten times in
succession, the eleventh time will result
in it becoming inactive.
If the indicator lamp in button A flashes
rapidly, this indicates that the alarm was
triggered during your absence. When
the ignition is switched on, this flashing
stops immediately.
To avoid triggering the alarm when
washing your vehicle, lock it using the
key in the driver's door lock.
Do not activate the alarm before
disconnecting the battery, otherwise the
siren will sound.
Malfunction
F
F
When the ignition is switched on, illumination
the indicator lamp in button A for ten seconds
indicates a siren fault.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
The exterior protection alarm alone remains
activated; the indicator lamp in button A flashes
once per second.
Automatic operation*
Depending on the legislation in force in your
country, one of these cases may occur:
To be effective, this deactivation must
be carried out each time the ignition is
switched off.
-
45 seconds after the vehicle is locked
using the remote control, the alarm is
activated, regardless of the status of the
doors and boot.
Reactivation of the interior
volumetric protection
-
2 minutes after the last door or the boot is
closed, the alarm is activated.
F
Unlock the vehicle using the unlocking
button on the remote control.
F To avoid triggering the alarm on entering
the vehicle, first press the unlocking
button on the remote control.
Failure of the remote control
F
Relock the vehicle using the remote control.
F
Unlock the vehicle using the key in the
driver's door lock.
The alarm is activated again with both types
of protection; the indicator lamp in button A
switches off.
F
F
Open the door; the alarm is triggered.
Switch on the ignition; the alarm stops.
* Depending on the country of sale.
51
