Get Driving -> Head-up display Guide for Peugeot 3008 SUV First Generation (2008-2015)

Driving

Head-up display

Buttons

Displays during operation

System which projects various information onto

a transparent blade in the driver's field of vision

so that they do not have to take their eyes off

the road.

This system operates when the engine is

running and the settings are stored when the

ignition is switched off.

1. Head-up display on / off.

2. Brightness adjustment.

3. Display height adjustment.

Once the system has been activated, the

following information is grouped together in the

head-up display:

A. The speed of your vehicle.

8

B. Cruise control/speed limiter information.

C. "Distance alert" information (depending on

version).

The blade is activated by pressing one

of the buttons.

D. Navigation information (depending on

version).

For more information on the navigation

system, refer to the "Audio equipment and

telematics" section.

147

Driving

Activation / Deactivation

Brightness adjustment

We recommend that adjustments are

only made using these buttons when the

vehicle is stationary.

When stationary or while driving, no

objects should be placed around the

transparent blade (or on its cover) to avoid

interfering with the movement of the blade

and preventing its correct operation.

In certain extreme weather conditions

(rain and/or snow, bright sunshine, ...)

the head-up display may not be legible

or may suffer temporary interference.

Certain glasses (sunglasses,

spectacles or polarised lenses) may

hamper reading of the information.

To clean the transparent blade, which

is made of organic glass, use a clean,

soft cloth (such as a spectacles cloth

or microfibre cloth). Do not use a dry or

abrasive cloth or detergent or solvent

products as these could scratch the

blade or damage the anti-reflection

coating.

F

With the engine running, press button 1.

The activated/deactivated status when the

engine was switched off is retained when

the engine is switched on again.

F

With the engine running, adjust the

brightness of the information using

button 2:

-

up to increase the brightness,

down to decrease the brightness.

Height adjustment

F

With the engine running, adjust the display

to the required height using button 3:

-

up to move the display up,

down to move the display down.

148

Driving

Distance alert*

Driving aid which informs the driver of the time

interval (in seconds) separating them from the

vehicle in front when the driving conditions are

stable.

Buttons

Displays during operation

It does not detect stationary vehicles and does

not itself act on your vehicle's controls.

1. On / off.

2. Alert value increase (+) / decrease (-).

The information is grouped together in the

head-up display.

Once the system has been activated:

A. The speed of your vehicle is outside the

operating range.

B. Your vehicle is within the operating range

but no vehicle has been detected.

C. The vehicle in front of you has been

detected.

The current time separating you from this

vehicle is displayed permanently.

D. The time between your vehicle and

the vehicle in front is less than the

programmed alert value (it flashes).

8

For the safety time to be observed, refer

to the current legislation or highway code

recommendations in your country.

The system operates when the speed of your

vehicle is higher than 45 mph (70 km/h) and

below 90 mph (150 km/h).

It has a programmable visual alert which

remains in the memory when the ignition is

switched off.

This system is a driving aid and cannot, in any

circumstances, take the place of vigilance on

the part of the driver.

* Depending on version.

149

Driving

Activation

Programming the alert

value

Alert

F

Select the alert value required using

button 2, in steps of 0.1 second:

-

up to increase: "+",

down to decrease: "-".

When the time (in seconds) between your

vehicle and the vehicle in front is less than the

programmed time (alert value), a visual alert

flashes.

Example with a value of 2 seconds:

F

Press button 1, the indicator lamp

comes on.

A safety time of 2 seconds is

recommended in normal driving

conditions (correct traction and speed)

to avoid a collision in the event of

emergency braking.

The system is activated but will only operate

from 45 mph (70 km/h).

The alert value can be programmed to

between 0.9 second and 2.5 seconds.

The visual alert can be deactivated by

programming a value of 0 second.

150

Driving

Deactivation

Operating limits

The system switches to standby automatically

if the sensor does not detect the vehicle in front

correctly (very difficult weather conditions,

sensor out of adjustment, ...). A message is

displayed in the multifunction screen.

If the indicator lamp in button 1

flashes, have the system checked

by a PEUGEOT dealer or a qualified

workshop.

This system is not an anti-collision radar

and it does not act on the movement

of your vehicle. It provides information

but cannot, in any circumstances, take

the place of vigilance on the part of the

driver.

The vehicle being followed may not be detected

in certain conditions such as, for example:

-

when turning,

when changing lane,

when the vehicle in front is either too far

ahead (maximum range of the sensor:

100 m) or stationary (in a traffic jam, ...).

F

Press button 1 to deactivate the system,

the indicator lamp goes off.

When the vehicle being followed is much

too near (time between the two vehicles less

than 0.5 seconds), the display remains fixed

at 0.5 seconds.

8

Reactivation

F

Press button 1 again to reactivate the

system.

The last value programmed is retained and

the indicator lamp comes on.

151

Driving -> Head-up display for Your Peugeot 3008 SUV First Generation (2008-2015)

Related Topics

Driving