Fittings
Safety anti-pinch
If the blind opens on its own while
In automatic mode and at the end of its travel,
if the blind meets an obstacle while closing it
stops and moves back slightly.
closing, and immediately after it stops.
F
F
Operate the control until the blind is
fully open.
Operate the control until the blind is
fully closed.
Reinitialisation: after reconnecting the battery
or in the event of a fault while the blind is
moving, it may be necessary to reinitialise the
system:
The safety anti-pinch function is not
operational during these operations.
F
Operate the control until the blind is fully
closed or open.
F
Continue to press for at least 3 seconds.
A slight movement of the blind will then be
noticeable, confirming the reinitialisation.
If the blind meets an obstacle during
operation, you must reverse the
movement of the blind.
When the driver operates the blind
control, they must ensure that nothing
and no one is preventing the correct
closing of the blind.
The driver must ensure that passengers
use the blind correctly.
Be aware of children when operating
the blind.
102
