Get Monitoring -> Distance recorders Guide for Peugeot 3008 SUV First Generation (2008-2015)

Monitoring

Distance recorders

The total and trip distances are displayed for

thirty seconds when the ignition is switched off,

when the driver's door is opened and when the

vehicle is locked or unlocked.

Trip distance recorder

It measures the distance travelled since it was

reset to zero by the driver.

Operation

When the vehicle lighting is on:

F

press the button to change the brightness

of the instrument panel,

F

when the lighting reaches the minimum

setting, release the button, then press

again to increase it,

When travelling abroad, you may

have to change the units of distance:

the display of road speed must be in

the official units (miles or km) for the

country. The change of units is done via

the screen configuration menu, with the

vehicle stationary.

or

F

when the lighting reaches the maximum

setting, release the button, then press

again to reduce it,

when the lighting reaches the level of

brightness required, release the button.

F

With the ignition on, press the button until

zeros appear.

F

Lighting dimmer

System for manual adjustment of the

brightness of the instrument panel in relation to

the exterior brightness.

When the vehicle lighting is on, you

cannot switch the instrument panel

lighting off but you can adjust it to

minimum.

Total distance recorder

It measures the total distance travelled by the

vehicle since its first registration.

Dimmer deactivated

When the lighting is off, or in day mode on

vehicles fitted with daytime running lamps,

pressing the button does not have any effect.

30

Monitoring

1

Monochrome screen A (without audio equipment)

Displays in the screen

Controls

Main menu

F

Press the "MENU" button to scroll through

the various menus of the main menu:

-

vehicle configuration,

options,

display settings,

languages,

units.

This displays the following information:

There are three display control buttons:

Press the "OK" button to select the menu

-

time,

date,

-

"ESC" to abandon the operation in

progress,

"MENU" to scroll through the menus or

sub-menus,

"OK" to select the menu or sub-menu

required.

ambient temperature* (this flashes if there

is a risk of ice),

alert messages,

trip computer (refer to the end of the

section).

-

Warning messages (e.g.: "Emission control

system faulty") or information messages

(e.g.: "Boot open") may appear temporarily.

Some can be cleared by pressing the "ESC"

button.

* With air conditioning only.

31

Monitoring

Options

Once the "Options" menu has been selected,

you can start diagnostics of the status of the

equipment (active, not active, faulty).

F

Wait for approximately ten seconds without

any action to allow the changed data to

be recorded or press the "ESC" button to

cancel.

Date and time

Once the "Display settings" menu has been

selected, you have access to the following settings:

The screen then returns to the normal display.

Vehicle conﬁguration

-

year,

month,

day,

hour,

minutes,

12 or 24 hour mode.

Languages

Once the "Languages" menu has been

selected, you can change the language used

by the display (Français, Italiano, Nederlands,

Portugues, Portugues-Brasil, Türkçe, Deutsch,

English, Espanol).

Once the "Vehicle configuration" menu has

been selected, you can activate or deactivate

the following equipment:

Units

-

wiper linked with reverse gear (refer to the

"Visibility" section),

selective unlocking (refer to the "Access"

section),

"guide-me-home" lighting (refer to the

"Visibility" section),

directional headlamps (refer to the

"Visibility" section),

automatic parking brake** (refer to the

"Driving" section),

parking space sensors (refer to the

"Driving" section),

Once the "Units" menu has been selected, you

can change the units for:

-

temperature (°C or °F),

fuel consumption (l/100 km, mpg or km/l).

F

Once you have selected a setting, press

the "OK" button to change its value.

As a safety measure, configuration of

the multifunction screen by the driver

must only be done when stationary.

** Depending on the country of sale.

...

32

Monitoring -> Distance recorders for Your Peugeot 3008 SUV First Generation (2008-2015)

Related Topics

Monitoring