Monitoring
Indicator and warning lamps
Visual indicators informing the driver that a system is in operation (operation or deactivation indicator lamps) or of the occurrence of a fault (warning
lamp).
When the ignition is switched on
Associated warnings
The warning lamps may come on
continuously (fixed) or flash.
Certain warning lamps come on for a
few seconds when the vehicle's ignition is
switched on.
When the engine is started, these same
warning lamps should go off.
The illumination of certain warning lamps may
be accompanied by an audible signal and a
message in the multifunction screen.
Certain warning lamps may come on
in one of two different modes. Only by
relating the type of illumination to the
operating status of the vehicle can it
be ascertained whether the situation is
normal or whether a fault has occurred.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation.
Warning/indicator lamp
is on
Cause
Action / Observations
Left-hand
flashing with buzzer.
The lighting stalk is pushed down.
direction indicator
Right-hand
flashing with buzzer.
The lighting stalk is pushed up.
direction indicator
Sidelamps
fixed.
fixed.
fixed.
The lighting stalk is in the
"Sidelamps" position.
Dipped beam
headlamps
The lighting stalk is in the "Dipped
beam headlamps" position.
Main beam
headlamps
The lighting stalk is pulled towards
you.
Pull the stalk to return to dipped beam headlamps.
16