Monitoring -> Service indicator for Your Peugeot 3008 SUV First Generation (2008-2015)

Monitoring  
Service indicator  
1
System which informs the driver when the  
next service is due, in accordance with the  
manufacturer's servicing schedule.  
The point at which the service is due is  
calculated from the last indicator zero reset,  
according to the mileage covered since the last  
service.  
For BlueHDi Diesel versions, depending on the  
country of sale, the level of deterioration of the  
engine oil may also be taken into account.  
More than 1 800 miles (3 000 km)  
Less than 600 miles (1 000 km)  
remain before the next service is due  
remain before the next service is due  
When the ignition is switched on, no service  
information appears in the screen.  
Example: 400 miles (900 km) remain before  
the next service is due.  
For 5 seconds after the ignition is switched on,  
the screen indicates:  
Between 600 miles (1 000 km)  
and 1 800 miles (3 000 km) remain  
before the next service is due  
For 5 seconds after the ignition is switched on, the  
spanner symbolising the service operations comes  
on. The distance recorder display line indicates the  
distance remaining before the next service is due.  
Example: 1 700 miles (2 800 km) remain before  
the next service is due.  
5 seconds after the ignition is switched on,  
the distance recorder resumes its normal  
operation. The spanner remains on to  
indicate that a service must be carried out  
soon.  
For 5 seconds after the ignition is switched on, the  
screen indicates:  
5 seconds after the ignition is switched on,  
the spanner goes off; the distance recorder  
resumes its normal operation. The screen then  
indicates the total and trip distances.  
27  
Monitoring  
Service overdue  
For 5 seconds after the ignition is switched on,  
the spanner flashes to indicate that the service  
must be carried out as soon as possible.  
Example: the service is overdue by 180 miles  
(300 km).  
If you have carried out the service on your  
vehicle yourself:  
For BlueHDi versions, the spanner may  
also come on early, according to the  
level of deterioration of the engine oil,  
which depends on the driving conditions  
in which the vehicle is used.  
F
F
switch off the ignition,  
press and hold the trip distance recorder  
zero reset button,  
F
F
switch on the ignition; the distance recorder  
display begins a countdown,  
when the display indicates "=0", release  
the button; the spanner disappears.  
For 5 seconds after the ignition is switched on,  
the screen indicates:  
Resetting the service  
indicator  
If you have to disconnect the battery  
following this operation, lock the vehicle  
and wait at least five minutes for the  
reset to be registered.  
5 seconds after the ignition is switched on,  
the distance recorder resumes its normal  
operation. The spanner remains on.  
Retrieving the service  
information  
You can access the service information at any  
time.  
With BlueHDi Diesel versions, the  
Service warning lamp also comes on  
when the ignition is switched on.  
F
Press the trip distance recorder zero reset  
button.  
The service information is displayed for a  
few seconds, then disappears.  
After each service, the service indicator must  
be reset to zero.  
28  
Monitoring  
Engine oil level indicator*  
1
On versions fitted with an electric oil level  
indicator, the state of the engine oil level  
is displayed in the instrument panel for a  
few seconds when the ignition is switched on,  
after the service information.  
Oil level indicator fault  
The level shown will only be correct  
if the vehicle is on level ground and  
the engine has been off for more than  
30 minutes.  
Oil level correct  
This is signalled by the flashing of "OIL--" or the  
display of a message "Oil level measurement  
invalid" in the instrument panel. Contact a  
PEUGEOT dealer or a qualified workshop.  
In the event of a fault with the electric indicator,  
the engine oil level is no longer monitored.  
When the system has a fault, you should check  
the engine oil level using the manual dipstick  
(located under the bonnet).  
Oil level low  
This is signalled by the flashing of "OIL", or the  
display of a message "Oil level incorrect" in the  
instrument panel, accompanied by illumination  
of the service warning lamp and an audible  
signal.  
Refer to the "Checking levels" section.  
If the low oil level is confirmed by a check using  
the dipstick, the level must be topped up to  
prevent damage to the engine.  
Refer to the "Checking levels" section.  
* Depending on version.  
29