Visibility -> Front daytime running lamps for Your Peugeot 3008 SUV First Generation (2008-2015)

Visibility  
Front daytime running  
lamps  
(light-emitting diodes)  
Manual guide-me-home  
lighting  
The temporary illumination of the dipped beam  
headlamps after the vehicle's ignition has been  
switched off makes the driver's exit easier  
when the light is poor.  
4
They come on automatically when the engine  
is started, when the lighting control stalk is in  
position "0" or "AUTO".  
Switching on  
Switching off  
F
With the ignition off, "flash" the headlamps  
using the lighting stalk.  
The manual guide-me-home lighting switches  
off automatically after a set time.  
F
A further "headlamp flash" switches the  
function off.  
81  
Visibility  
Automatic illumination of headlamps  
When a low level of ambient light is detected by a sunshine sensor, the number plate lamps,  
sidelamps and dipped beam headlamps are switched on automatically, without any action on  
the part of the driver. They can also come on if rain is detected, at the same time as automatic  
operation of the windscreen wipers.  
Automatic guide-me-home  
lighting  
As soon as the ambient light returns to a sufficient level or after the windscreen wipers are switched  
off, the lamps are switched off automatically.  
When the automatic illumination of headlamps  
function is activated (lighting control stalk in  
the "AUTO" position), under low ambient light  
the dipped beam headlamps remain on when  
the ignition is switched off.  
Activation  
Operating fault  
In the event of a malfunction of the  
sunshine sensor, the lighting comes  
on, this warning lamp is displayed  
in the instrument panel and/or a  
message appears in the screen, accompanied  
by an audible signal.  
Programming  
Activation or deactivation,  
as well as the duration of the  
guide-me-home lighting, is set  
in the vehicle configuration  
menu.  
Contact a PEUGEOT dealer or a qualified  
workshop.  
In fog or snow, the sunshine sensor  
may detect sufficient light. In this  
case, the lighting will not come on  
automatically.  
Do not cover the sunshine sensor,  
coupled with the rain sensor and  
located in the centre of the windscreen  
behind the rear view mirror; the  
associated functions would no longer  
be controlled.  
F
Turn the ring to the "AUTO" position. The  
activation of the function is accompanied  
by the display of a message in the screen.  
Deactivation  
F
Turn the ring to another position.  
Deactivation of the function is accompanied  
by the display of a message in the screen.  
82  
Visibility  
Exterior welcome lighting  
The remote switching on of the lighting makes your approach to the vehicle easier in poor light. It is  
activated according to the level of light detected by the sunshine sensor.  
Switching on  
Switching off  
The exterior welcome lighting switches  
off automatically after a set time, when  
the ignition is switched on or on locking  
the vehicle.  
F
Press the open padlock on the  
remote control.  
4
The dipped beam headlamps and the  
sidelamps come on; your vehicle is also  
unlocked.  
The duration of the welcome lighting is  
associated with and identical to that of  
the automatic guide-me-home lighting.  
83  
Visibility  
Manual beam  
adjustment of  
Automatic beam  
adjustment with  
halogen headlamps xenon headlamps  
To avoid causing a nuisance to other road  
users, the beam height of the halogen  
headlamps should be adjusted according to the  
load in the vehicle.  
0. 1 or 2 people in the front seats.  
-. 3 people.  
In order to avoid causing a nuisance to other  
road users, this system corrects the height of the  
xenon headlamps beam automatically and when  
stationary, according to the load in the vehicle.  
1. 5 people.  
-. Intermediate setting.  
2. 5 people + maximum authorised load.  
-. Intermediate setting.  
3. Driver + maximum authorised load.  
If a fault occurs, this warning lamp is  
displayed on the instrument panel,  
accompanied by an audible signal  
and a message in the multifunction screen.  
The system then places your headlamps in the  
lowest position.  
If a fault occurs, do not touch the xenon  
bulbs. Contact a PEUGEOT dealer or a  
qualified workshop.  
The initial setting is position "0".  
84