Visibility -> Wiper controls for Your Peugeot 3008 SUV First Generation (2008-2015)

Visibility  
Wiper controls  
Manual controls  
The vehicle's front and rear wipers are  
designed to improve the driver's visibility  
progressively according to the weather  
conditions.  
Windscreen wipers  
A. Wiping speed selection stalk.  
Fast (heavy rain).  
Normal (moderate rain).  
Intermittent (proportional to the speed  
of the vehicle).  
Off.  
Model with intermittent wiping  
Programming  
Single wipe (press down and release).  
or  
You can modify the settings for the following  
functions:  
-
-
automatic rain sensitive windscreen wipers,  
rear wiping on engaging reverse gear.  
Automatic, then single wipe.  
Refer to the corresponding  
section.  
Model with AUTO wiping  
86  
Visibility  
Rear wiper  
B. Rear wiper selection ring:  
Reverse gear  
When reverse gear is engaged, the rear wiper  
will come into operation automatically if the  
windscreen wipers are on.  
4
Park.  
Programming  
Switching the automatic  
operation of the rear wiper in  
reverse on or off is done via the  
vehicle configuration menu.  
This function is activated by  
default.  
Intermittent wipe.  
Wash-wipe (set duration).  
If a significant accumulation of snow or  
ice is present, or when using a bicycle  
carrier on the boot, remember to  
deactivate the automatic rear wiper.  
87  
Visibility  
Screenwash/headlamp wash low  
level  
In the case of vehicles fitted with  
headlamp washers, when the  
minimum level of the reservoir  
is reached, this warning lamp is  
displayed in the instrument panel, accompanied  
by an audible signal and a message.  
The warning lamp is displayed when the  
ignition is switched on, or every time the stalk is  
operated, until the reservoir is refilled.  
Next time you stop, refill the screenwash /  
headlamp wash reservoir.  
Windscreen wash  
Pull the wiper stalk towards you.  
The windscreen wash then the wipers operate  
for a set time.  
The headlamp wash is also activated if the  
dipped beam headlamps are on.  
Headlamp wash  
Press the end of the lighting stalk to activate  
the headlamp wash, when the dipped beam  
headlamps are on.  
88