Get Access -> Back-up procedures Guide for Peugeot 3008 SUV 2020

Access

Electrical interference

The electronic key may not operate if

close to certain electronic devices such as

telephones (switched on or on standby) or

laptop computers, strong magnetic ﬁelds, etc.

► After normal locking, pull one of the

interior door controls to unlock the vehicle.

► After deadlocking, you must use the

remote control, the "Keyless Entry and

Starting" system or the built-in key to unlock

the vehicle.

Back-up procedures

Lost keys, remote control,

electronic key

Go to a PEUGEOT dealer with the vehicle's

registration certiﬁcate, your personal

identiﬁcation documents and if possible, the label

bearing the key code.

The PEUGEOT dealer will be able to retrieve the

key code and the transponder code, enabling a

new key to be ordered.

Central locking

Automatic (anti-intrusion

security)

The doors and boot lock automatically while

driving (speed above 6 mph (10 km/h)).

To deactivate/reactivate this function (activated

by default):

Complete unlocking/locking

of the vehicle with the key

► Press the button until an audible signal is

triggered and a conﬁrmation message appears.

Use this procedure in the following situations:

– Remote control battery discharged.

– Remote control malfunction.

– Vehicle battery discharged.

– Vehicle in an area subject to strong

electromagnetic interference.

In the ﬁrst case, change the remote control

battery.

Transporting long or voluminous

objects

Manual

Press the central locking control to drive

with the boot open and the doors locked.

Otherwise, every time the speed of the

vehicle exceeds 6 mph (10 km/h), the sound

of the locks rebounding will be heard and an

alert will be displayed.

► Press this button to lock/unlock the vehicle

(doors and boot) from inside the vehicle.

The indicator lamp comes on to conﬁrm the

central locking of the vehicle.

In the second case, reinitialise the remote

control.

Refer to the corresponding sections.

Central locking does not take place if any

of the doors are open.

When locking/deadlocking from the

outside

When the vehicle is locked or deadlocked

from the outside, the indicator lamp ﬂashes

and the button is deactivated.

► Insert the key in the door lock.

Access

► Turn the key towards the front/rear to unlock/

lock the vehicle.

► Turn the key towards the rear again within

5 seconds to deadlock the vehicle.

Locking

Battery type: CR2032/3 volts.

If the vehicle is ﬁtted with an alarm, it will

not be activated when locking with the

key.

If the alarm is activated, the siren sounds

when the door is opened; switch on the

ignition to stop it.

Central locking not

functioning

► Unclip the cover by inserting a small

screwdriver in the slot and lift the cover.

► Open the doors.

► For the rear doors, check that the child lock

is not on.

Refer to the corresponding section.

► Remove the black cap, located on the edge

of the door, using the key.

► Insert the key into the socket without forcing

it, then turn the latch towards the inside of the

door.

► Remove the ﬂat battery from its housing.

► Put the new battery in place, respecting the

polarity. Start by inserting it into the contacts

located in the corner, then clip the cover onto

the unit.

► Reinitialise the remote control.

For more information on Reinitialising the

remote control, refer to the corresponding

section.

Use these procedures in the following cases:

– Central locking malfunction.

– Battery disconnected or discharged.

In the event of a malfunction of the

central locking system, the battery must

be disconnected to ensure that the vehicle is

locked fully.

► Remove the key and reﬁt the black cap.

► Close the doors and check from the outside

that the vehicle is locked.

Driver's door

► Turn the key towards the rear of the vehicle

to lock it, or towards the front to unlock it.

Do not throw remote control batteries

away, as they contain metals that are

harmful to the environment. Take them to an

approved disposal point.

Changing the battery

A message is displayed on the instrument panel

when the battery needs changing.

Passenger doors

Unlocking

► Pull the interior door opening control.

Access

Reinitialising the remote

control

Following replacement of the battery or in

the event of a fault, it may be necessary to

reinitialise the remote control.

Doors

Boot

Opening

Opening the tailgate

From outside

► After unlocking the vehicle or with the

"Keyless Entry and Starting" system electronic

key in the recognition zone, pull the door handle.

When selective unlocking is activated,

the ﬁrst press of the remote control

unlocking button permits unlocking of the

driver's door only.

►

With the vehicle unlocked or with the

electronic key in the recognition zone, press the

central tailgate control.

► Raise the tailgate.

When selective unlocking is activated,

the electronic key must be close to the

rear of the vehicle.

From inside

► Pull the interior opening control of a door; this

unlocks the vehicle completely.

► Insert the mechanical key (incorporated into

the remote control) into the lock to open the

vehicle.

► Place the electronic key against the back-up

reader on the steering column and hold it there

until the ignition is switched on.

► With a manual gearbox, place the gear lever

in neutral then fully depress the clutch pedal.

► With an automatic gearbox, while in mode

P, depress the brake pedal.

The tailgate is not designed to hold a

bicycle carrier.

With selective unlocking activated:

– Opening the driver's door unlocks

the driver's door only (if the vehicle has not

already been completely unlocked).

– Opening one of the passenger doors

unlocks the rest of the vehicle.

Closing the tailgate

► Lower the tailgate using the interior grips.

► Release the grips and press down on the

outside of the tailgate to close it.

Closing

In the event of a malfunction or if you

experience diﬃculty opening or closing

the tailgate, have it checked by a PEUGEOT

dealer or a qualiﬁed workshop without delay,

to avoid the issue deteriorating and prevent

If a door is not properly closed, this

warning lamp comes on accompanied by

a message if the engine is running, and an

audible signal when the vehicle is travelling at

more than 6 mph (10 km/h).

► Switch on the ignition by pressing the

"START/STOP" button.

If the fault persists after reinitialisation, contact

a PEUGEOT dealer or a qualiﬁed workshop

without delay.

Access -> Back-up procedures for Your Peugeot 3008 SUV 2020

Popular Manuals