Get Driving -> Cruise control Guide for Peugeot 3008 SUV 2020

Driving

To return to the speed setting, release the

accelerator pedal (when the set speed is

reached again, the displayed speed stops

ﬂashing).

This system automatically maintains the

vehicle’s speed at the value programmed

by the driver (speed setting), without the use of

the accelerator pedal.

2. Activate cruise control at the current speed/

decrease speed setting

3. Activate cruise control at the current speed/

increase speed setting

Cruise control is switched on manually.

It requires a minimum vehicle speed of 25 mph

(40 km/h).

With a manual gearbox, third gear or higher must

be engaged.

4. Pause/resume cruise control with the speed

setting previously saved

5. Depending on version:

Operating limits

Never use the system in the following

situations:

Display the speed thresholds saved using the

Memorising speeds function

Use the speed suggested by the Speed Limit

Recognition and Recommendation (MEM

display)

– In an urban area with the risk of

pedestrians crossing the road.

– In heavy traﬃc (except versions with the

Stop & Go function).

– On winding or steep roads.

– On slippery or ﬂooded roads.

– In poor weather conditions.

– In the event of restricted visibility for the

driver.

– Driving on a speed circuit.

– Driving on a rolling road.

– When using a ‘space-saver’ type spare

wheel.

– When using snow chains, non-slip covers

or studded tyres.

With an automatic gearbox, mode D or second

gear or higher in mode M must be engaged.

Cruise control remains active after

changing gear on engines ﬁtted with a

manual gearbox and Stop & Start.

For more information on Memorising speeds

or the Speed Limit Recognition and

Recommendation, refer to the corresponding

sections.

Switching oﬀ the ignition cancels any

speed setting.

Information displayed on

the instrument panel

Steering-mounted control

Cruise control

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids and the

Cruise control - particular

6. Cruise control pause/resume

7. Cruise control mode selection

8. Speed setting value

1. ON (CRUISE position)/OFF

recommendations.

134

Driving

Cruise control can also be paused

temporarily:

– by pressing the brake pedal.

– automatically, if the electronic stability

control (ESC) system is triggered.

The selection screen closes after a few

moments.

9. Speed suggested by the Speed Limit

recognition and recommendation system

(depending on version)

This setting becomes the new cruise speed.

To modify the cruise speed setting using the

speed suggested by the Speed Limit Recognition

and Recommendation shown on the instrument

panel:

► Press button 5 once; a message is displayed

to conﬁrm the memorisation request.

► Press button 5 again to save the suggested

speed.

Switching on/pausing

Modifying the cruise speed

setting

Cruise control must be active.

To modify the cruise speed setting, based on the

current speed of the vehicle:

► Brieﬂy press button 2 or 3 to change the

value in steps of + or - 1 mph (km/h).

► Press and hold button 2 or 3 to change the

value in steps of + or - 5 mph (km/h).

► Turn thumbwheel 1 to the "CRUISE" position

to select cruise control mode; the function is

paused.

The speed is immediately shown on the

instrument panel as the new speed setting.

Switching oﬀ

► Turn the thumbwheel 1 to the "OFF" position:

the cruise control information disappears from

the screen.

Pressing and holding button 2 or

3 results in a rapid change in the speed

of the vehicle.

► Press button 2 or 3 to activate cruise control

and save a speed setting when the vehicle has

reached the desired speed; the vehicle’s current

speed is saved as the speed setting.

Malfunction

As a precaution, we recommend setting

a cruise speed fairly close to the current

speed of your vehicle, to avoid any sudden

acceleration or deceleration of the vehicle.

► Release the accelerator pedal.

Dashes are displayed (ﬂashing, initially, then

ﬁxed) in the event of a cruise control system

malfunction.

To change the cruise speed setting using

memorised speed settings and from the touch

screen:

► Press button 5 to display the memorised

speed settings.

Have the system checked by a PEUGEOT

dealer or a qualiﬁed workshop.

► Pressing button 4 temporarily pauses the

function.

► Pressing button 4 again restores operation of

the cruise control (ON).

Drive Assist Plus

Only available on versions with EAT8 automatic

gearbox.

► Press the touch screen button for the desired

speed setting.

135

Driving -> Cruise control for Your Peugeot 3008 SUV 2020

Popular Manuals