Driving -> Gear shift indicator for Your Peugeot 3008 SUV 2020

Driving  
Sport  
Gear shift indicator  
Stop & Start  
6
To obtain more dynamic driving in order to  
benefit from the maximum performance of the  
vehicle.  
Electric power is used to supplement the petrol  
engine as long as there is energy left in the  
battery.  
(Depending on engine)  
The Stop & Start function puts the engine  
This system is designed to reduce fuel  
consumption by recommending the most suitable  
gear.  
temporarily into standby - STOP mode - during  
phases when the vehicle is stationary (e.g. red  
lights, traffic jams). The engine automatically  
restarts - START mode - as soon as the driver  
indicates the intention of moving off again.  
Primarily designed for urban use, the function  
is intended to reduce fuel consumption and  
exhaust emissions as well as the noise level  
when stationary.  
Operation  
4WD (4-wheel drive)  
Depending on the driving situation and  
the vehicle's equipment, the system may  
recommend skipping one or more gears.  
Gear engagement recommendations are  
not to be considered mandatory. Indeed, the  
configuration of the road, the traffic density and  
safety remain determining factors when choosing  
the best gear. Therefore, the driver remains  
responsible for deciding whether or not to follow  
the system’s advice.  
(Depending on version)  
Improves the vehicle's grip at low and moderate  
speeds by driving all 4 wheels continuously.  
4WD mode (4-wheel drive) is especially  
suited to driving on snow-covered roads and  
difficult terrain (e.g. mud, sand) as well as ford  
crossings, at moderate speed.  
Depending on the driving conditions and the  
battery charge level, 4WD mode may be 100%  
electric.  
The function does not affect the functionalities of  
the vehicle, in particular the braking.  
Deactivation/Reactivation  
The function is activated by default when the  
ignition is switched on.  
The settings are changed via the  
Driving/Vehicle touch screen menu.  
A message on the instrument panel confirms the  
change of status.  
The system cannot be deactivated.  
If the system does not detect a situation of wheel  
slipping or poor grip after 300 metres of driving, it  
switches to Hybrid mode.  
With an automatic gearbox, the system is  
only active in manual operation.  
When the function is deactivated, if the engine  
was in standby, it restarts immediately.  
The information appears on the  
instrument panel, in the form of an arrow  
and the recommended gear.  
This mode will be even more effective if  
the vehicle is fitted with suitable tyres,  
such as winter tyres.  
Associated indicator lamps  
Function activated.  
The system adapts the gear change  
instructions according to the driving  
conditions (e.g. slope, load) and driving style  
(e.g. power demand, acceleration, braking).  
The system never suggests:  
The grip can be improved up to 84 mph  
(135 km/h) using the electric motors; above this  
speed, the vehicle is driven by the front wheels  
only.  
Function deactivated or malfunction.  
Opening the bonnet  
Before doing anything under the bonnet,  
deactivate the Stop & Start system to avoid  
– engaging first gear;  
– engaging reverse gear.  
123