Get Driving -> Speed Limit Recognition and Recommendation Guide for Peugeot 3008 SUV 2020

Driving

If this is not the case, when the vehicle is

stationary, set the display to the required

units of speed so that it complies with what is

authorised locally.

In case of doubt, contact a PEUGEOT dealer

or a qualiﬁed workshop.

This system displays the maximum speed

authorised locally on the instrument panel, using:

– Speed limit signs detected by the camera.

– Speed limit information from the navigation

system’s mapping.

"MEM" button

– Signs indicating a shared traﬃc zone detected

by the camera.

Sign detected

Suggested speed

(calculated)

Memorising speeds

With this button, you can select a memorised

speed setting to use with the speed limiter or the

programmable cruise control.

For more information on the Speed limiter

or Cruise control, refer to the corresponding

section.

This function, used only for the speed limiter

and programmable cruise control, lets you

save speed settings that will subsequently be

proposed for the purpose of conﬁguring these

two systems.

Entry into a shared

traﬃc zone

Without PEUGEOT

Connect Nav

10 mph or 20 km/h

(depending on

Example:

the units on the

You can memorise multiple speed settings for

each of the two systems.

By default, some speed settings are already

memorised.

instrument panel)

With PEUGEOT

Connect Nav

Display of the speed

in force in the country

you are driving in.

Speed Limit Recognition

and Recommendation

As a safety measure, the driver must only

change speed settings when stationary.

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

– Some supplementary traﬃc signs detected by

the camera.

Changing a speed setting

Speed settings can be activated,

deactivated, selected and changed in the

Driving / Vehicle touch screen menu.

128

Driving

The units for the speed limit (mph or

km/h) depend on the country you are

driving in.

This should be taken into account to ensure

you observe the speed limit.

For the system to work properly when

changing countries, the speed unit of the

instrument panel must match that of the

country you are driving in.

Supplementary

traﬃc sign detected

Display of

the speed

associated with

the supplementary

traﬃc sign

Supplementary

traﬃc sign detected

Display of

the speed

associated with

the supplementary

traﬃc sign

Speed limit when

raining

If the wiper control

stalk is in the

Speed limit for

vehicles with a

gross vehicle

weight or gross

train weight less

than 3.5 tonnes

56 mph (90 km/h)

(for example)

Examples:

"intermittent wipe"

or "automatic wipe"

position (in order

to activate the rain

sensor):

Automatic sign reading is a driving aid

system and does not always display the

correct speed limits.

68 mph (110 km/h)

(for example)

The speed limit signs present on the road

always take priority over those displayed by

the system.

The system is designed to detect signs that

conform to the Vienna Convention on road

signs.

Speed limit in case

of snow

If the outside

temperature is below

3°C:

19 mph (30 km/h)

(for example)

with a "snowﬂake"

symbol

Speed limit when

towing

If an approved towing

device is ﬁxed to the

vehicle:

56 mph (90 km/h)

(for example)

Example:

Speciﬁc speed limits, such as those for

heavy goods vehicles, are not displayed.

The display of the speed limit on the

instrument panel is updated when passing

a speed limit sign intended for cars (light

vehicles).

Speed limit

applicable over a

certain distance

Example:

43 mph (70 km/h)

(for example)

Speed limit at

certain times of the

day

19 mph (30 km/h)

(for example)

with a "clock" symbol

Example:

Activation/Deactivation

By default, the system is automatically activated

at every engine start.

Navigation mapping should be regularly

updated in order to receive accurate

speed limit information from the system.

The settings are changed via the

Driving/Vehicle touch screen menu.

129

Driving

Information displayed on

the instrument panel

Recommendation

For a suggested maximum speed, the ﬁrst time

that the vehicle exceeds it by more than 3 mph

(5 km/h) (e.g. 59 mph (95 km/h)), the speed is

displayed and ﬂashes for 10 seconds (depending

on version).

In addition to Speed Limit Recognition and

Recommendation, the driver can select the

speed displayed as a speed setting for the speed

limiter or cruise control using the speed limiter or

cruise control 'store' button.

Operating limits

The system does not take account of reduced

speed limits, especially those imposed in the

following cases:

– Poor weather (rain, snow).

– Atmospheric pollution.

For more information on the Speed

limiter, Cruise control or Adaptive

cruise control, refer to the corresponding

sections.

1. Detected speed limit indication

2. End of speed limit indication

– Towing.

– Driving with a space-saver type spare wheel

or snow chains ﬁtted.

Steering-mounted controls

– Tyre repaired using the temporary puncture

repair kit.

– Young drivers.

The system may not display the speed limit if it

does not detect a speed limit sign within a preset

period and in the following situations:

– Road signs that are obstructed, non-standard,

damaged or bent.

The system is active but is not detecting speed

limit information.

1. Speed limiter/cruise control mode selection

2. Memorise the speed setting

– Obsolete or incorrect maps.

On detecting speed limit information, the system

displays the value.

130

Driving

Information displayed on the

instrument panel

Extended Traﬃc Sign

Recognition

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

3. Speed limit indication

4. Speed memorisation prompt

5. Current speed setting

Storing the speed setting

► Press button 2once to save the suggested

speed value.

This additional system recognises these road

signs and displays them on the instrument panel

if the appropriate display mode is selected:

– No entry: when entering a lane in the wrong

direction, an alert message, including the symbol

of this sign, is displayed on the instrument panel

(request to check the direction of traﬃc).

– Other signs: as you approach it, the symbol

of the corresponding sign is displayed on the

instrument panel.

A message is displayed, conﬁrming the request.

► Switch on the speed limiter/cruise control.

The speed limiter/cruise control information is

displayed.

Upon detecting a sign suggesting a new speed

setting, the system displays the value and

"MEM" ﬂashes for a few seconds, prompting you

to save it as a new speed setting.

The actual road signs always take priority

over the display from the system.

The signs must comply with the Vienna

Convention on road signs.

If there is a diﬀerence of less than 6 mph

(9 km/h) between the speed setting and

the speed displayed by the Speed Limit

Recognition and Recommendation, the

"MEM" symbol is not displayed.

► Press button 2again to conﬁrm and save the

new speed setting.

The display then reverts to its previous state.

Activation / Deactivation

It is set via the Driving / Vehicle touch

screen menu.

Depending on the road conditions, several

speeds may be displayed.

131

Driving -> Speed Limit Recognition and Recommendation for Your Peugeot 3008 SUV 2020

Popular Manuals