Get Ease of use and comfort -> Boot fittings Guide for Peugeot 3008 SUV 2020

Ease of use and comfort

Side blinds

2. 12V accessory socket (max. 120W)

3. Boot lamp

4. Rear seat folding controls

5. Hooks

6. Stowing rings

7. Boot ﬂoor

8. Storage well/Tool box under the ﬂoor

9. Open storage compartments

Depending on version, the storage boxes are

ﬁtted in the ﬂoor, at the foot of the side seats on

the second row.

On the left-hand side, it may also contain the

temporary puncture repair kit.

► To open them, lift the cover by the notch.

Boot ﬁttings

Fitted to the second row windows, they protect

the passenger compartment from the sun's rays.

► Pull the central tab to unroll the blind.

► Position the blind's clip on the hook.

Always guide the blind slowly, using the

tab, while raising or lowering it.

1. Load space cover roller

2. 12 V accessory socket (max. 120 W)

3. Boot lamp

Storage boxes

4. Luggage retaining strap

5. Storage brackets of the load space cover

roller

6. Armrest with cup holder and storage

compartment

7. Open storage compartment

1. Load space cover shelf

Ease of use and comfort

– a movable section which rises when the boot

is opened, with an open storage space.

In the 5-seat conﬁguration, it is installed behind

the second row seats, with the third row seats

stored folded away.

In the 7-seat conﬁguration, it is stored behind the

third row seats.

8. Concertina panels

9. Stowing rings

The stowing rings are designed to secure

luggage using diﬀerent types of retaining

nets.

These retaining nets are available as an

option or as an accessory.

In the event of sudden deceleration,

objects placed on the load space cover

roller can turn into projectiles.

For more information, contact a PEUGEOT

dealer or a qualiﬁed workshop.

For information on installing the High load

retaining net, refer to the corresponding

section.

Installation

To remove the load space cover shelf:

► Unhook the two cords.

► Raise the movable section slightly, then

unclip it on each side.

Load space cover shelf

► Unclip the ﬁxed section on each side, then

take out the load space cover shelf.

The load space cover shelf can be stowed under

the boot ﬂoor.

In the event of sudden deceleration,

objects placed on the load space cover

shelf can turn into projectiles.

► Position the left-hand and right-hand ends of

the roller in cut-outs A, with the moving ﬂap at

the front.

► Unwind the roller until it reaches the boot

Load space cover roller

pillars.

► Insert the roller guides into the rails in pillars

It consists of two sections:

– a ﬁxed section with an open storage space.

Ease of use and comfort

Removal

► Position the roller within the space located

above the armrest, one side after the other, tilting

it slightly.

► Slide the roller as far as possible, until it

reaches the notches at the back of the boot, with

the two hinges facing down.

► Unfold the 3^rdrow seats.

The folded concertina panels can be placed in

the horizontal or upright position.

To fold the 3^rdrow seats with the roller stored at

the back, it is necessary to raise the concertina

panels in order to give access to the seat

unlocking controls (red straps).

► Remove the roller guides from the rails in

pillars B.

► Guide the roller as it reels in.

► Unlock the roller by pressing one of the

handles located at the ends of the roller bracket.

High load retaining net

Storage behind the 3^rdrow seats

This removable net allows the entire loading

volume up to the roof to be used:

– behind the front seats (1^strow) when the rear

seats are folded down.

– behind the rear seats (2^ndrow) when the load

space cover is removed.

It protects the occupants in case of

sudden braking.

► Make sure that the 3^rdrow seats are folded.

► Fold the ﬁrst two concertina panels.

Ease of use and comfort

Behind the rear seats

Behind the front seats

(Depending on version)

Behind the front seats

► Remove the load space cover.

► Remove the trim covers on each side,

located in the upper section in the roof.

► Position the net's upper hooks in the roof.

► Attach the straps of the net to the lower rings,

located on each side trim of the boot.

► Pull on the straps to stretch the net.

► Fold down the rear seats.

► Insert the ends of the bar, one after the other,

into the ﬁxing points in the roof.

► Remove the caps from the Top Tether ﬁxings.

► Attach the net’s straps to the lower anchorage

points, located in the housing of the Top Tether

ﬁxings.

► Fold down the rear seats.

► Remove the trim covers on each side,

located in the upper section in the roof.

► Position the net's upper hooks in the roof.

► Attach the net’s straps to the lower anchorage

points, located directly below the ﬁxings of the

rear bench seat cushion.

► Pull on the straps to stretch the net.

Once ﬁtted, the net does not prevent

tipping of the rear backrests.

Ease of use and comfort

Behind the rear seats

On certain versions, the adjustable boot

ﬂoor cannot be ﬁtted in the low position.

To change the height:

► Lift and pull the ﬂoor towards you using its

central handle, then use the lateral stops to

move it.

► Push the ﬂoor all the way forwards to place it

in the desired position.

► Remove the load space cover roller.

► Insert the ends of the bar, one after the other,

into the ﬁxing points in the roof.

► Lift the boot ﬂoor as far as possible or lift the

articulated boot mat (depending on version) to

access the storage well.

► Attach the straps of the net to the lower rings,

located on each side trim of the boot.

► Pull on the straps to stretch the net.

Depending on version, it includes:

– A temporary puncture repair kit with the tool

kit.

– A spare wheel with the tool kit.

– The traction battery charging cable

(Rechargeable hybrid).

2-position boot ﬂoor

To keep it in the inclined position:

► From the high position, lift the ﬂoor towards

the load space cover.

► Take it past the retractable stops, then rest

the ﬂoor on these stops.

This two-position ﬂoor allows the boot volume to

be optimised using the lateral stops located on

the sides:

– High position (100 kg max.): to obtain a ﬂat

ﬂoor up to the front seats, when the rear seats

are folded down.

The load space cover can also be stored here

(depending on version).

Storage well

12 V accessory socket

► To connect a 12 V accessory (maximum

power: 120 W), lift the cover and plug in a

suitable adaptor.

– Low position (150 kg max.): maximum boot

volume.

► Switch on the ignition.

Ease of use and comfort

The connection of an electrical device

not approved by PEUGEOT, such as a

USB charger, may adversely aﬀect the

operation of vehicle electrical systems,

causing faults such as poor radio reception or

interference with displays in the screens.

Boot lamp

It comes on automatically when the boot is

opened and goes oﬀ automatically when the

boot is closed.

The lighting time varies according to the

circumstances:

– When the ignition is oﬀ, approximately 10

minutes.

– In energy saving mode, approximately 30

seconds.

– With the engine running, unlimited.

Ease of use and comfort -> Boot fittings for Your Peugeot 3008 SUV 2020

Popular Manuals