Ease of use and comfort -> Heating and Ventilation for Your Peugeot 3008 SUV 2020

Ease of use and comfort  
a continuous storage floor through to the back  
of the front seats.  
Air distribution  
regulate the automatic air conditioning  
system.  
By placing the front passenger seat in the  
table position, you obtain a continuous  
storage floor through to the dashboard.  
► Operate the air conditioning system for at  
least 5 to 10 minutes once or twice a month to  
keep it in good working order.  
► If the system does not produce cold air,  
switch it off and contact a PEUGEOT dealer  
or a qualified workshop.  
Operations on the seats must only be  
done when the vehicle is stationary.  
When towing a large load on a steep gradient  
in high temperatures, switching off the air  
conditioning increases the available engine  
power, enhancing the towing capacity.  
Heating and Ventilation  
Air intake  
1. Windscreen demisting/de-icing vents  
2. Front side window demisting/de-icing vents  
3. Adjustable and closable side air vents  
4. Adjustable and closable central air vents  
5. Air outlets to the front footwells  
6. Air outlets to the rear footwells  
7. Adjustable and closable air vents, with blower  
(depending on version)  
Avoid driving for too long with the  
ventilation off or with prolonged operation  
of interior air recirculation. Risk of misting and  
deterioration of the air quality!  
The air circulating in the passenger compartment  
is filtered and originates either from the  
exterior, via the grille located at the base of the  
windscreen, or from the inside in air recirculation  
mode.  
If the interior temperature is very high  
after the vehicle has stood for a long  
time in the sunshine, air the passenger  
compartment for a few moments.  
Put the air flow control at a setting high  
enough to quickly change the air in the  
passenger compartment.  
Controls  
Depending on version, the controls are  
accessible in the Climate touch screen menu  
or are grouped together on the centre console  
panel.  
Advice  
Using the ventilation and air  
conditioning system  
To ensure that air is distributed evenly,  
keep the external air intake grilles at the base  
of the windscreen, the nozzles, the vents, the  
air outlets and the air extractor in the boot  
free from obstructions.  
Condensation created by the air  
conditioning results in a discharge of  
water underneath the vehicle. This is perfectly  
normal.  
► Do not cover the sunshine sensor located  
on the dashboard; this sensor is used to  
56  
Ease of use and comfort  
Servicing the ventilation and air  
conditioning system  
► Ensure that the passenger compartment  
filter is in good condition and have the filter  
elements replaced regularly.  
This system works with the engine running, but  
access to the ventilation and its controls remains  
possible with the ignition on.  
3
Press the Climate menu button to display  
the system controls page.  
We recommend using a composite passenger  
compartment filter. Its specific active additive  
helps protect against polluting gases and bad  
smells.  
To ensure correct operation of the  
air conditioning system, have it checked  
according to the recommendations in the  
Manufacturer’s service schedule.  
Stop & Start  
1. Temperature adjustment  
The heating and air conditioning systems  
only operate when the engine is running.  
Temporarily deactivate the Stop & Start  
system to maintain a comfortable temperature  
in the passenger compartment.  
For more information on the Stop &  
Start system, refer to the corresponding  
section.  
2. Air flow adjustment  
3. Air distribution adjustment  
4. Interior air recirculation  
5. Air conditioning on/off  
6. Maximum air conditioning  
7. Switching the system off  
8. Automatic visibility programme  
9. Automatic comfort programme on/off  
10. Access to the secondary page  
11. Selection of settings for the Automatic  
comfort programme (Soft/Normal/Fast)  
12. "AQS (Air Quality System)" function (with  
pollution sensor) (depending on version)  
13. Mono-zone/Dual-zone  
Dual-zone automatic air  
conditioning  
This system automatically controls the activation  
of the air conditioning system, regulating the  
temperature, air flow and air distribution inside  
the passenger compartment.  
14. Temperature conditioning (depending on  
version)  
"REAR" function (depending on version)  
57