Ease of use and comfort -> Mirrors for Your Peugeot 3008 SUV 2020

Ease of use and comfort  
To modify the settings:  
► Adjust the height and reach to suit your  
driving position.  
► Push the control to lock the steering wheel.  
Adjustment  
3
► Begin with the driver’s seat.  
► Select a massage intensity from the three  
levels offered: "1" (Low), "2" (Normal) or "3"  
(High).  
► Select another type of massage from those  
offered.  
For safety reasons, these adjustments  
must only be carried out with the vehicle  
stationary.  
► Wait for the driver's seat settings page to  
disappear.  
► Next, proceed with the passenger's seat in  
the same way.  
Mirrors  
The changes are applied immediately.  
Once activated, the system starts a one hour  
massage cycle, made up of sequences of 6  
minutes of massage followed by 3 minutes at  
rest.  
Door mirrors  
► Move control A to the right or to the left to  
select the corresponding mirror.  
► Move control B in any of the four directions  
to adjust.  
As a safety measure, the mirrors should  
be adjusted to reduce the "blind spots".  
The objects that you see in the mirrors are  
in fact closer than they appear. Take this  
into account in order to correctly judge the  
distance of vehicles approaching from behind.  
The system automatically stops at the end of the  
cycle; the indicator lamp for the button goes off.  
► Return control A to its central position.  
Manual folding  
Steering wheel  
adjustment  
The mirrors can be folded manually (parking  
obstruction, narrow garage, etc.).  
► Turn the mirror towards the vehicle.  
Demisting/Defrosting  
The demisting/defrosting of the door  
mirrors works with the demisting/  
defrosting of the rear screen.  
Electric folding  
For more information on Rear screen  
demisting/defrosting, refer to the  
corresponding section.  
Depending on equipment, the door mirrors can  
be folded electrically.  
► From the inside, with the  
ignition on, place control A in the  
central position.  
► When stationary, pull the control to release  
the steering wheel.  
► Pull control A backwards.  
► Lock the vehicle from the outside.  
47  
Ease of use and comfort  
If the mirrors are folded using control A,  
they will not unfold when the vehicle is  
unlocked.  
Interior rear view mirror  
Rear head restraints  
Electric unfolding  
► From outside: unlock the vehicle.  
► From inside: with the ignition on, place  
control A in the central position and then pull it  
rearwards.  
Depending on version, the automatic  
door mirror folding/unfolding function is  
configured via the Driving / Vehicle touch  
screen menu.  
Otherwise, this setting can be carried out at a  
PEUGEOT dealer or a qualified workshop.  
The electrochrome system uses a sensor that  
detects the level of exterior brightness and that  
coming from the rear of the vehicle, in order to  
automatically and gradually switch between day  
and night usage.  
Automatic tilting in reverse gear  
Depending on version, this function allows to  
automatically tilt the mirrors downwards to assist  
with parking manoeuvres in reverse gear.  
With the engine running, on engaging reverse  
gear, the mirror glasses tilt downwards.  
They return to their initial position:  
– A few seconds after coming out of reverse  
gear.  
To ensure optimum visibility while  
manoeuvring, the mirror automatically  
brightens when reverse gear is engaged.  
The system is deactivated if the load in the  
boot exceeds the height of the load space  
cover or if the load space cover has items  
placed on it.  
High position (use):  
– Once the vehicle speed exceeds 6 mph  
(10 km/h).  
– When the engine is switched off.  
This function is set via the Driving/  
Vehicle touch screen menu.  
► Pull the head restraint fully up.  
Low position (stowing; when the seats are not  
in use):  
► Press the lugs A to release the head restraint  
and push it down.  
48  
Ease of use and comfort  
The rear head restraints can be removed.  
► Check that the centre seat belt buckle is  
stored in its housing.  
Folding the backrests  
3
Removing a head restraint  
The folding of the backrest is  
accompanied by a slight lowering of the  
corresponding cushion.  
► Pull the head restraint fully up.  
► Press the lugs A to release the head restraint  
and remove it completely.  
To obtain a flat surface, it is necessary to  
place the adjustable boot floor in the high  
position.  
When the backrest is released, the red  
indicator in the release grip is visible.  
► Store the head restraint.  
Refitting a head restraint  
► Insert the head restraint rods into the guides  
in the corresponding seat backrest.  
► Push the head restraint down as far as it will  
go.  
Folding from the passenger  
compartment  
► Press the lugs A to release the head restraint  
and push it down.  
Each section of the backrest has two release  
controls:  
– A grip 1 on the outer edge of the backrest.  
– A lever 2 on the boot side trim (depending on  
version).  
Never drive with passengers seated at  
the rear when the head restraints are  
removed; the head restraints should be in  
place and in the high position.  
The backrests should only be  
manoeuvred when the vehicle is  
stationary.  
The head restraint for the central  
seat and those for the side seats  
are not interchangeable.  
First steps:  
► Lower the head restraints.  
► Lift up the rear armrest.  
► If necessary, move the front seats forward.  
► Check that no person or object might interfere  
with the folding of the backrests (e.g. clothing,  
luggage).  
Rear bench seat  
► Press the backrest release grip 1.  
► Guide the backrest 3 down to the horizontal  
position.  
► Check that the outer seat belts are lying flat  
on the backrests.  
Bench seat with fixed cushions and split folding  
backrests (2/3-1/3) to adapt the boot load space.  
49