Get Ease of use and comfort -> Seat modularity Guide for Peugeot 3008 SUV 2020

Ease of use and comfort

► While holding it by the sides at the plastic

covers, tilt the seat forwards.

► Simultaneously place both hooks located at

the front of the seat onto the coloured securing

lugs on the right and left at the bottom of the seat

well.

Seat modularity

Conﬁguration examples

Check that the front hooks of the seat are

positioned correctly on the two lugs.

If they are not, you must remove the seat and

start the procedure again.

► Once the rear part of the seat has been

raised, take hold of each side of the seat

cushion, at the plastic covers, then bring the seat

towards you, keeping it at the same angle.

Repositioning the seats

These operations must be performed from the

boot sill.

7 seats

5 seats

Transport of

objects

As long as the seat is not in the correct

position, it must be held with both hands

by the sides, keeping it folded.

► Release the rear part of the seat which will

lock in place under its own weight.

The yellow lever G folds back automatically.

► Check in advance that the seat storage well

is empty and that the removable support is

properly secured against the front wall.

If the seat is not perfectly horizontal, do

not press on the backrest and do not try

to unfold it - risk of damaging the mechanism!

Take out the seat and start the operation

again.

6 seats

4 seats

By folding the second row seats and

retracting the third row seats, you obtain

Ease of use and comfort

a continuous storage ﬂoor through to the back

of the front seats.

Air distribution

regulate the automatic air conditioning

system.

By placing the front passenger seat in the

table position, you obtain a continuous

storage ﬂoor through to the dashboard.

► Operate the air conditioning system for at

least 5 to 10 minutes once or twice a month to

keep it in good working order.

► If the system does not produce cold air,

switch it oﬀ and contact a PEUGEOT dealer

or a qualiﬁed workshop.

Operations on the seats must only be

done when the vehicle is stationary.

When towing a large load on a steep gradient

in high temperatures, switching oﬀ the air

conditioning increases the available engine

power, enhancing the towing capacity.

Heating and Ventilation

Air intake

1. Windscreen demisting/de-icing vents

2. Front side window demisting/de-icing vents

3. Adjustable and closable side air vents

4. Adjustable and closable central air vents

5. Air outlets to the front footwells

6. Air outlets to the rear footwells

7. Adjustable and closable air vents, with blower

(depending on version)

Avoid driving for too long with the

ventilation oﬀ or with prolonged operation

of interior air recirculation. Risk of misting and

deterioration of the air quality!

The air circulating in the passenger compartment

is ﬁltered and originates either from the

exterior, via the grille located at the base of the

windscreen, or from the inside in air recirculation

mode.

If the interior temperature is very high

after the vehicle has stood for a long

time in the sunshine, air the passenger

compartment for a few moments.

Put the air ﬂow control at a setting high

enough to quickly change the air in the

passenger compartment.

Controls

Depending on version, the controls are

accessible in the Climate touch screen menu

or are grouped together on the centre console

panel.

Advice

Using the ventilation and air

conditioning system

► To ensure that air is distributed evenly,

keep the external air intake grilles at the base

of the windscreen, the nozzles, the vents, the

air outlets and the air extractor in the boot

free from obstructions.

Condensation created by the air

conditioning results in a discharge of

water underneath the vehicle. This is perfectly

normal.

► Do not cover the sunshine sensor located

on the dashboard; this sensor is used to

Ease of use and comfort -> Seat modularity for Your Peugeot 3008 SUV 2020

Popular Manuals