Instruments -> Indicators for Your Peugeot 3008 SUV 2020

Instruments  
Black/white warning lamps  
The value indicated is calculated  
according to the distance covered and  
the time elapsed since the last service.  
The alert may also be triggered close to a  
due date.  
1
Automatic gearbox or Electric automatic  
gearbox (e-EAT8) (Rechargeable hybrid)  
Fixed.  
The automatic gearbox is locked.  
You must press the Unlock button to unlock it.  
Service spanner  
eSave function (Rechargeable hybrid)  
Fixed, accompanied by the reserved  
electric range.  
On temporarily when the ignition is  
switched on.  
Between 620 and 1,860 miles (1,000 and 3,000  
km) remain before the next service is due.  
Fixed, when the ignition is switched on.  
The next service is due in less than 620  
miles (1,000 km).  
► Press and hold the button located on the end  
of the wiper control stalk.  
► Switch on the ignition; a temporary display  
window appears and a countdown begins.  
► When the display indicates =0, release the  
button; the spanner disappears.  
The eSave function is activated.  
Indicators  
Have your vehicle serviced very soon.  
Service indicator  
The servicing information is expressed in terms  
of distance (miles or kilometres) and time  
(months or days).  
The alert is given at whichever of these two  
terms is reached first.  
The servicing information is displayed in the  
instrument panel. Depending on the version of  
the vehicle:  
– The distance recorder display line indicates  
the distance remaining before the next service  
is due, or the distance travelled since it was due  
preceded by the "-" sign.  
– An alert message indicates the distance  
remaining, as well as the period before the next  
service is due or how long it is overdue.  
Service spanner flashing  
If you have to disconnect the battery  
following this operation, lock the vehicle  
and wait at least 5 minutes for the reset to be  
registered.  
Flashing then fixed, when the  
ignition is switched on.  
(With BlueHDi Diesel engines, associated with  
the Service warning lamp.)  
The servicing interval has been exceeded.  
Have your vehicle serviced as soon as possible.  
Reminder of the servicing information  
You can access the servicing information at any  
time.  
Resetting the service indicator  
The service indicator must be reset after each  
service.  
If you have serviced your vehicle yourself:  
► Switch off the ignition.  
► Press the trip distance recorder reset button.  
The servicing information is displayed for a few  
seconds, then disappears.  
Engine oil level indicator  
(Depending on version)  
17  
Instruments  
On versions fitted with an electric gauge, the  
engine oil level status is displayed on the  
instrument panel for a few seconds when  
the ignition is switched on, after the servicing  
information, in the form of messages.  
For more information on Checking levels,  
refer to the corresponding section.  
For more information on Checking  
levels, refer to the corresponding  
section.  
Coolant temperature  
indicator  
AdBlue® range indicators  
(BlueHDi)  
The Diesel BlueHDi engines are equipped with  
a system that associates the SCR (Selective  
Catalytic Reduction) emissions control system  
and the Diesel particle filter (DPF) for the  
treatment of exhaust gases. They cannot  
function without AdBlue® fluid.  
When the level of AdBlue® falls below the  
reserve level (between 1,500 and 0 miles (2,400  
and 0 km)), a warning lamp lights up when  
the ignition is switched on and an estimate  
of the distance that can be travelled before  
engine starting is prevented is displayed in the  
instrument panel.  
The level read will only be correct if the  
vehicle is on level ground and the engine  
has been off for more than 30 minutes.  
Low oil level  
This is indicated by the message "Oil  
level incorrect" on the instrument panel,  
accompanied by the lighting of the Service  
warning lamp and an audible signal.  
If a low oil level is confirmed by a check using  
the dipstick, the level must be topped up to avoid  
damage to the engine.  
With the engine running:  
For more information on Checking levels, refer  
to the corresponding section.  
– In zone A, the temperature is correct.  
– In zone B, the temperature is too high.  
The associated warning lamp and the  
STOP warning lamp light up in red on the  
instrument panel, accompanied by the display of  
a message and an audible signal.  
You must stop the vehicle as soon as it is  
safe to do so.  
Oil gauge malfunction  
The engine starting prevention system  
required by regulations is activated  
automatically once the AdBlue® tank is empty.  
It is then no longer possible to start the  
engine until the minimum level of AdBlue® has  
been topped up.  
This is indicated by the message "Oil level  
measurement invalid" on the instrument panel.  
Consult a PEUGEOT dealer or a qualified  
workshop.  
In the event of a malfunction of the  
electric gauge, the oil level is no longer  
monitored.  
If the system is faulty, you must check the  
engine oil level using the manual dipstick  
located in the engine compartment.  
Wait a few minutes before switching off the  
engine.  
Manual display of driving range  
After switching off the ignition, carefully  
open the bonnet and check the coolant  
level.  
While the driving range is greater than  
1,500 miles (2,400 km), it is not displayed  
automatically.  
18  
Instruments  
Malfunction of the SCR emissions  
control system  
Warning/  
indicator  
lamps on  
Action  
Remaining  
range  
1
► Press this button to temporarily display the  
driving range.  
Malfunction detection  
Top up as  
soon as  
possible.  
Between  
500 miles  
and 62  
miles (800  
km and  
If a malfunction is detected,  
Actions required related to a lack of  
AdBlue®  
these warning lamps come  
on, accompanied by an  
audible signal and the  
display of an "Emissions  
control fault" message.  
The following warning lamps light up when the  
quantity of AdBlue® is below the reserve level:  
driving range of 1,500 miles (2,400 km).  
Together with the warning lamps, messages  
regularly remind you of the need to top up to  
avoid engine starting being prevented. Refer to  
the Warning and indicator lamps section for  
details of the messages displayed.  
100 km)  
A top-up is  
vital, there is  
a risk that the  
engine will  
be prevented  
from starting.  
Between 62  
miles and 0  
miles (100  
km and 0  
km)  
The alert is triggered while driving when the  
fault is detected for the first time, and thereafter  
when switching on the ignition for subsequent  
journeys, for as long as the cause of the fault  
persists.  
For more information on AdBlue®  
(BlueHDi) and in particular on topping  
up, refer to the corresponding section.  
If the fault is temporary, the alert  
disappears during the next journey, after  
self-diagnostic checks of the SCR emissions  
control system.  
To be able  
0 miles (km)  
to restart the  
engine, add at  
least 5 litres of  
AdBlue® to the  
tank.  
Warning/  
indicator  
lamps on  
Action  
Remaining  
range  
Malfunction confirmed during the  
permitted driving phase (between 685  
miles and 0 miles (1,100 km and 0 km))  
Top up.  
Between  
1,500 miles  
and 500  
If the fault indication is still displayed  
permanently after 31 miles (50 km) of driving, the  
fault in the SCR system is confirmed.  
The AdBlue warning lamp flashes and  
a message is displayed ("Emissions  
control fault: starting prevented in X miles  
(kms)"), indicating the driving range in miles or  
kilometres.  
miles (2,400  
km and 800  
km)  
19  
Instruments  
While driving, the message is displayed every 30  
seconds. The alert is repeated when switching  
on the ignition.  
You can continue driving for up to 685 miles  
(1,100 km) before the engine starting  
prevention system is triggered.  
CHARGE Energy recovery for partly  
recharging the traction battery.  
The slider is located in this zone  
during deceleration: taking your foot  
off the accelerator pedal or braking.  
Partial recharging of the battery by  
energy recovery has no effect on the  
charge level indicator.  
Have it checked by a PEUGEOT dealer  
or a qualified workshop.  
Starting prevented  
POWER High power demand, using the  
combined capabilities of the petrol  
engine and the electric motor(s)  
(depending on version).  
Every time the ignition is switched on, the  
message "Emissions control fault: Starting  
prevented" is displayed.  
Charge level indicator  
(Rechargeable hybrid)  
To restart the engine  
Contact a PEUGEOT dealer or a  
qualified workshop.  
The slider is located in this zone  
during more dynamic driving phases  
when high levels of performance are  
being demanded.  
ECO  
Optimal use of energy (internal  
combustion or electric).  
Power indicator  
(Rechargeable hybrid)  
The power indicator shows in real time the power  
demanded from the vehicle.  
The slider is located in this zone  
when driving under electric power  
and when optimal use is being made  
of the petrol engine, both accessible  
by adopting a suitable driving style.  
A symbol indicates the threshold at  
which the petrol engine will restart.  
The driver can therefore moderate  
their acceleration to remain in electric  
driving mode.  
The charge level of the traction battery and  
the remaining range in electric driving mode  
are permanently displayed when the vehicle is  
switched on.  
There are 3 zones:  
The range displayed depends on the use  
of the vehicle (type of driving and speed),  
the outside temperature and the activated  
comfort equipment.  
20