Instruments
► Select "Screen configuration".
Definitions
► Select the "Brightness” tab.
► Adjust the instrument panel and
screen brightness by using the arrows or
moving the slider.
Range
(miles or km)
Distance that can still be travelled with the
fuel remaining in the tank (based on the
average fuel consumption over the last few miles
(kilometres) travelled).
This value may vary following a change in driving
style or terrain, leading to a significant change in
current fuel consumption.
When the range falls below 19 miles (30 km),
dashes are displayed.
After filling with at least 5 litres of fuel, the range
is recalculated and is displayed if it exceeds 62
miles (100 km).
► Press this button to save and exit.
You can also switch off the screen:
► Press this button to select the
Settings menu.
► Pressing the button located on the end of the
wiper control stalk displays the following tabs in
turn:
► Select "Turn off screen".
– Current information:
The screen goes off completely.
► Press the screen again (anywhere on its
surface) to turn it on.
• Total range (Petrol or Diesel).
• Current consumption (Petrol or Diesel).
• Stop & Start time counter (Petrol or Diesel).
• Percentage of the current journey travelled
in all-electric driving mode (Rechargeable
hybrid).
If dashes instead of figures continue to be
displayed while driving, contact a PEUGEOT
dealer or a qualified workshop.
Trip computer
Displays information related to the current trip
(range, fuel consumption, average speed, etc.).
– Trips "1" then "2":
• Average speed.
Current consumption
(mpg or l/100 km or km/l)
• Average fuel consumption.
• Distance travelled.
Data displayed on the
instrument panel
Trip computer data is displayed permanently
when the "TRIP COMPUTER" or "PERSONAL"
display mode is selected, depending on version.
In all other display modes, pressing the end of
the wiper control stalk will cause this data to
appear temporarily in a specific window.
Display of the different tabs
Calculated during the last few seconds.
Trip reset
This function is only displayed at speeds above
19 mph (30 km/h).
► When the desired trip is displayed,
press the button on the end of the wiper
control stalk for more than 2 seconds.
Trips "1" and "2" are independent and are used
in the same way.
Average consumption
(mpg or l/100 km or km/l)
Calculated since the last trip computer
reset.
22
