Lighting and visibility -> Automatic headlamp dipping for Your Peugeot 3008 SUV 2020

Lighting and visibility  
– If the windscreen is dirty, misted-up or  
masked (e.g. sticker) in front of the camera.  
– If the vehicle is facing highly reflective signs  
or safety barrier reflectors.  
The system is not able to detect:  
– Road users that do not have their own  
lighting, such as pedestrians.  
– Vehicles with hidden lighting (e.g. travelling  
behind a safety barrier on the motorway).  
– Vehicles at the top or bottom of a steep  
slope, on winding roads, on crossroads.  
reason, the lighting will not come on  
automatically.  
You can activate/deactivate this function  
and adjust the welcome lighting duration  
in the Driving / Vehicle touch screen menu.  
4
The inner surface of the windscreen may  
become misted up and affect the proper  
operation of the rain/sunshine sensor.  
In humid and cold weather, demist the  
windscreen regularly.  
Door mirror spotlamps  
These spotlamps facilitate access to the vehicle  
by lighting the ground near the front doors.  
When the front courtesy lamp switch is in  
this position, the spotlamps come on  
automatically:  
– when the vehicle is unlocked.  
– when a door is opened.  
Guide-me-home and  
welcome lighting  
– when a request to locate the vehicle is  
received from the remote control.  
Whatever the position of the front courtesy lamp  
switch, they also come on with the welcome  
lighting and guide-me-home lighting functions.  
They go off automatically after 30 seconds.  
Maintenance  
Clean the windscreen regularly,  
particularly the area in front of the camera.  
The internal surface of the windscreen can  
also become misted around the camera.  
In humid and cold weather, demist the  
windscreen regularly.  
Guide-me-home lighting  
With the ring of the lighting control stalk in the  
"AUTO" position and when the light is poor, the  
dipped beam headlamps come on automatically  
when the ignition is switched off.  
Do not allow snow to accumulate on the  
bonnet or roof of the vehicle as this could  
obstruct the camera.  
You can activate/deactivate this function  
and adjust the guide-me-home lighting  
duration in the Driving/Vehicle touch screen  
menu.  
Automatic lighting  
systems - General  
recommendations  
The automatic lighting systems use a detection  
camera, located at the top of the windscreen.  
Welcome lighting  
Automatic headlamp  
dipping  
When the vehicle is unlocked, if the ambient  
light is low and the "Automatic illumination of  
headlamps" function is activated, this system  
automatically turns on certain exterior lamps  
as well as certain lamps in the passenger  
compartment.  
Operating limits  
The system may be disrupted or not work  
correctly:  
– When visibility conditions are poor  
(e.g. snowfall, heavy rain).  
For more information, refer to the  
General recommendations for  
automatic lighting systems.  
77  
Lighting and visibility  
With the ring of the lighting control stalk in the  
"AUTO" position and the function activated on  
the touch screen, this system automatically  
switches between dipped and main beam  
headlamps, according to lighting and traffic  
conditions, using a camera located at the top of  
the windscreen.  
► Switch the headlamps manually between  
dipped and main beam to pause the function.  
If the "AUTO" and "Dipped beam" indicator  
lamps were on, the system changes to main  
beam.  
If the "AUTO" and "Main beam" indicator lamps  
were on, the system changes to dipped beam.  
To reactivate the function, once again switch  
the headlamps manually between dipped and  
main beam.  
Activation/Deactivation  
It is set via the Driving / Vehicle touch  
screen menu.  
The state of the system stays in the memory  
when switching off the ignition.  
Operation  
If the ambient light level is very low and traffic  
conditions permit:  
– The main beam headlamps  
come on automatically. These  
indicator lamps light up on the instrument panel. Static cornering lighting  
If the ambient light level is sufficient and/or the  
traffic conditions do not allow the main beam  
headlamps to be lit:  
– The dipped beam headlamps  
remain lit. These indicator lamps  
light up on the instrument panel.  
The function is deactivated if the foglamps  
are switched on or if the system detects poor  
visibility conditions (e.g. fog, heavy rain,  
snowfall).  
This system is a driving aid.  
The driver remains responsible for  
the vehicle's lighting, its correct use in the  
prevailing light, visibility and traffic conditions,  
and for compliance with driving and vehicle  
regulations.  
When the foglamps are switched off or when the  
With the dipped or main beam headlamps on,  
this function allows headlamps to illuminate  
the inside of a bend using light-emitting diodes  
(LEDs).  
The speed of the vehicle must be less than 56  
mph (90 km/h).  
visibility conditions become favourable again, the  
function is automatically reactivated.  
This indicator lamp goes out when the  
function is deactivated.  
The system becomes operational when  
the vehicle exceeds 16 mph (25 km/h).  
When the speed falls below 9 mph (15 km/h),  
the function is no longer operational.  
Pause  
This function is only available with the "Full LED"  
technology headlamps.  
If the situation requires a change of headlamp  
beam, the driver can take over at any time.  
78