Lighting and visibility -> Automatic illumination of headlamps for Your Peugeot 3008 SUV 2020

Lighting and visibility  
Headlamp beam height  
adjustment  
Automatic illumination of  
lamps  
0 (Initial setting)  
With the lighting control stalk in the “AUTO”  
position and if a low level of exterior brightness  
is detected by the rain/sunshine sensor, the  
sidelamps and dipped beam headlamps are  
switched on automatically, without any action on  
the part of the driver. They may also come on if  
rain is detected, at the same time as automatic  
operation of the windscreen wipers.  
Driver only or driver + front passenger  
1 Driver only or driver + front passenger + row 3  
2 7 people  
3 7 people + load in the boot  
4 Not used  
Manual adjustment of LED  
technology headlamps  
5 Driver only + load in the boot  
6 Not used  
As soon as the brightness returns to a sufficient  
level or after the windscreen wipers are switched  
off, the lamps are switched off automatically.  
Automatic adjustment of  
the Full LED technology  
headlamps  
This system automatically adjusts the height of  
the headlamp beams according to the load in the  
vehicle.  
In the event of a malfunction, this warning  
lamp comes on on the instrument panel,  
accompanied by the display of a message and  
an audible signal.  
Malfunction  
To avoid dazzling other road users, the height  
of these headlamp beams must be adjusted  
according to the load in the vehicle.  
In the event of a malfunction of the rain/  
sunshine sensor, the vehicle’s lamps  
come on and this warning lamp is displayed on  
the instrument panel, accompanied by an  
audible signal and/or the display of a message.  
Have it checked by a PEUGEOT dealer or a  
qualified workshop.  
0 (Initial setting)  
Driver only or driver + front passenger  
1 5 people  
2 Not used  
3 5 people + load in the boot  
4 Not used  
5 Driver only + load in the boot  
6 Not used  
The system places the headlamp beams in the  
lowest position.  
Have it checked by a PEUGEOT dealer or a  
qualified workshop.  
Do not cover the rain/sunshine sensor  
located at the top centre of the  
windscreen behind the interior rear view  
mirror; the associated functions would no  
longer be controlled.  
Do not touch the "Full LED" technology  
headlamps - risk of electrocution!  
In fog or snow, the rain/sunshine sensor  
may detect sufficient light. For this  
76  
Lighting and visibility  
– If the windscreen is dirty, misted-up or  
masked (e.g. sticker) in front of the camera.  
– If the vehicle is facing highly reflective signs  
or safety barrier reflectors.  
The system is not able to detect:  
– Road users that do not have their own  
lighting, such as pedestrians.  
– Vehicles with hidden lighting (e.g. travelling  
behind a safety barrier on the motorway).  
– Vehicles at the top or bottom of a steep  
slope, on winding roads, on crossroads.  
reason, the lighting will not come on  
automatically.  
You can activate/deactivate this function  
and adjust the welcome lighting duration  
in the Driving / Vehicle touch screen menu.  
4
The inner surface of the windscreen may  
become misted up and affect the proper  
operation of the rain/sunshine sensor.  
In humid and cold weather, demist the  
windscreen regularly.  
Door mirror spotlamps  
These spotlamps facilitate access to the vehicle  
by lighting the ground near the front doors.  
When the front courtesy lamp switch is in  
this position, the spotlamps come on  
automatically:  
– when the vehicle is unlocked.  
– when a door is opened.  
Guide-me-home and  
welcome lighting  
– when a request to locate the vehicle is  
received from the remote control.  
Whatever the position of the front courtesy lamp  
switch, they also come on with the welcome  
lighting and guide-me-home lighting functions.  
They go off automatically after 30 seconds.  
Maintenance  
Clean the windscreen regularly,  
particularly the area in front of the camera.  
The internal surface of the windscreen can  
also become misted around the camera.  
In humid and cold weather, demist the  
windscreen regularly.  
Guide-me-home lighting  
With the ring of the lighting control stalk in the  
"AUTO" position and when the light is poor, the  
dipped beam headlamps come on automatically  
when the ignition is switched off.  
Do not allow snow to accumulate on the  
bonnet or roof of the vehicle as this could  
obstruct the camera.  
You can activate/deactivate this function  
and adjust the guide-me-home lighting  
duration in the Driving/Vehicle touch screen  
menu.  
Automatic lighting  
systems - General  
recommendations  
The automatic lighting systems use a detection  
camera, located at the top of the windscreen.  
Welcome lighting  
Automatic headlamp  
dipping  
When the vehicle is unlocked, if the ambient  
light is low and the "Automatic illumination of  
headlamps" function is activated, this system  
automatically turns on certain exterior lamps  
as well as certain lamps in the passenger  
compartment.  
Operating limits  
The system may be disrupted or not work  
correctly:  
– When visibility conditions are poor  
(e.g. snowfall, heavy rain).  
For more information, refer to the  
General recommendations for  
automatic lighting systems.  
77