Lighting and visibility -> Guide-me-home and welcome lighting for Your Peugeot 3008 SUV 2020

Lighting and visibility  
– If the windscreen is dirty, misted-up or  
masked (e.g. sticker) in front of the camera.  
– If the vehicle is facing highly reflective signs  
or safety barrier reflectors.  
The system is not able to detect:  
– Road users that do not have their own  
lighting, such as pedestrians.  
– Vehicles with hidden lighting (e.g. travelling  
behind a safety barrier on the motorway).  
– Vehicles at the top or bottom of a steep  
slope, on winding roads, on crossroads.  
reason, the lighting will not come on  
automatically.  
You can activate/deactivate this function  
and adjust the welcome lighting duration  
in the Driving / Vehicle touch screen menu.  
4
The inner surface of the windscreen may  
become misted up and affect the proper  
operation of the rain/sunshine sensor.  
In humid and cold weather, demist the  
windscreen regularly.  
Door mirror spotlamps  
These spotlamps facilitate access to the vehicle  
by lighting the ground near the front doors.  
When the front courtesy lamp switch is in  
this position, the spotlamps come on  
automatically:  
– when the vehicle is unlocked.  
– when a door is opened.  
Guide-me-home and  
welcome lighting  
– when a request to locate the vehicle is  
received from the remote control.  
Whatever the position of the front courtesy lamp  
switch, they also come on with the welcome  
lighting and guide-me-home lighting functions.  
They go off automatically after 30 seconds.  
Maintenance  
Clean the windscreen regularly,  
particularly the area in front of the camera.  
The internal surface of the windscreen can  
also become misted around the camera.  
In humid and cold weather, demist the  
windscreen regularly.  
Guide-me-home lighting  
With the ring of the lighting control stalk in the  
"AUTO" position and when the light is poor, the  
dipped beam headlamps come on automatically  
when the ignition is switched off.  
Do not allow snow to accumulate on the  
bonnet or roof of the vehicle as this could  
obstruct the camera.  
You can activate/deactivate this function  
and adjust the guide-me-home lighting  
duration in the Driving/Vehicle touch screen  
menu.  
Automatic lighting  
systems - General  
recommendations  
The automatic lighting systems use a detection  
camera, located at the top of the windscreen.  
Welcome lighting  
Automatic headlamp  
dipping  
When the vehicle is unlocked, if the ambient  
light is low and the "Automatic illumination of  
headlamps" function is activated, this system  
automatically turns on certain exterior lamps  
as well as certain lamps in the passenger  
compartment.  
Operating limits  
The system may be disrupted or not work  
correctly:  
– When visibility conditions are poor  
(e.g. snowfall, heavy rain).  
For more information, refer to the  
General recommendations for  
automatic lighting systems.  
77