Lighting and visibility -> Night Vision for Your Peugeot 3008 SUV 2020

Lighting and visibility  
not available (in "Night Vision" mode), the  
conditions are met, an alert is triggered if there is  
a risk of collision.  
The permanent display disappears upon  
switching off the ignition or if the conditions are  
not met.  
Activation / Deactivation  
4
indicator lamp comes on in grey.  
It is set via the Driving / Vehicle touch  
If all operating conditions are met, the  
indicator lamp comes on in green: the  
display in the instrument panel (with "Night  
Vision" mode selected) and the triggering of  
alerts are available.  
If certain operating conditions (speed or  
temperature) are not met, the  
indicator lamp comes on in orange: only the  
display in the instrument panel is available (in  
"Night Vision" mode).  
screen menu.  
Switching on / off  
This system operates from a certain angle of  
rotation of the steering wheel.  
The system does not operate:  
– below a certain angle of rotation of the  
steering wheel.  
Night Vision is a driving aid system that  
cannot, under any circumstances,  
replace the personal assessment of  
night-time visibility and traffic conditions. .  
In some conditions, the contrasts in  
temperature are insufficient and the system  
may not detect all dangers or, conversely,  
it may give false warnings (e.g. engines of  
lorries parked on the edge of the road).  
– above 56 mph (90 km/h),  
– when reverse gear is engaged.  
Whilst the exterior light is too bright or the dipped  
beam headlamps have not been switched on,  
the alerts are not available.  
Night Vision  
Activation/Deactivation  
This function is set via the Driving/  
Vehicle touch screen menu.  
Conditions for operation  
– With the engine running and in Stop mode  
of Stop & Start.  
– Very low light conditions with dipped beam  
headlamps on and in good working order.  
Temperature between -30°C and +28°C.  
– Speed below 99 mph (160 km/h).  
– Detection of animals taller than 0.50 m.  
This system identifies and signals the presence  
of pedestrians and animals in the driver's field  
of vision, in low exterior light conditions, using  
an infrared camera located at the front of the  
vehicle.  
Operation  
Select the "Night vision" display mode for  
the infrared camera image to be displayed  
constantly on the instrument panel. When the  
If the function is selected but the display  
on the instrument panel and the alerts are  
79  
Lighting and visibility  
– Camera masked by snow, mud or dust.  
– Camera scratched after going through roller  
car washes repeatedly.  
– Very high outside temperature.  
– At the top or bottom of a steep slope.  
– On a very winding road.  
Wiper control stalk  
Before operating the wipers in wintry  
conditions, clear any snow, ice or frost  
from the windscreen and around the wiper  
arms and blades.  
– In a bend.  
– After an impact which may have impaired the  
camera settings or damaged it.  
– After repainting of the grille outside of the  
PEUGEOT dealer network or a qualified  
workshop.  
Do not operate the wipers on a dry  
windscreen. In extremely hot or cold  
weather, check that the wiper blades are not  
stuck to the windscreen before operating the  
wipers.  
The camera detection range is between 15 m  
(for pedestrians) and 200 m, depending on  
visibility conditions.  
The image provided by the camera is displayed  
in shades of grey in the instrument panel; warm  
objects appear brighter than cold objects.  
If pedestrians or animals are detected, they  
appear in yellow frames.  
Maintenance  
recommendations  
The infrared camera has a wash nozzle  
connected to the vehicle’s front screenwash  
system.  
This nozzle operates every 5th use of the  
screenwash.  
Regularly check that the camera is clean.  
In bad weather, or in wintry conditions, ensure  
that the camera is not covered with mud, ice or  
snow.  
After using an automatic car wash, you  
may temporarily notice abnormal noises  
and poorer wiping performance. You do not  
need to replace the wiper blades.  
If the system detects a risk of  
collision with pedestrians or  
animals, it triggers an alert: one of these symbols  
appears on the instrument panel. The  
corresponding silhouette is framed in red.  
If the "Night Vision" display mode has not been  
selected, the alert is triggered in the form of a  
temporary window.  
Windscreen wipers  
In the event of an alert, the driver may act by  
making an avoiding manoeuvre or by braking.  
Malfunction  
Operating limits  
The following situations may interfere with  
the operation of the system or prevent it from  
working:  
If the event of a malfunction, this warning  
lamp comes on in orange on the  
instrument panel, accompanied by the display of  
a message.  
To select the wiping speed: raise or lower the  
stalk to the desired position.  
– Poor visibility conditions (falling snow, heavy  
rain, thick fog).  
Have it checked by a PEUGEOT dealer or a  
qualified workshop.  
80