2020 Peugeot 3008 SUV PEUGEOT Connect Radio User Manual

MY CAR USER MANUAL

PEUGEOT Connect Radio for Your Peugeot 3008 SUV 2020

PEUGEOT Connect Radio  
– Connecting to the CarPlay® or Android  
Auto applications (certain applications stop  
displaying when the vehicle is moving).  
– Changing the system settings and  
configuration.  
access the menus, then press the virtual buttons  
on the touch screen.  
At all times it is possible to display the rolling  
menus by pressing the screen briefly with three  
fingers.  
PEUGEOT Connect  
Radio  
10  
All touch-sensitive areas on the screen are  
white.  
The system is protected so that it only  
operates in the vehicle.  
The message Energy economy mode is  
displayed when the system is about to go into  
standby.  
On pages with multiple tabs at the bottom of the  
screen, you can switch between pages either  
by tapping the tab for the desired page or by  
swiping the pages to the left or right with your  
finger.  
Press in the shaded area to go back up a level  
or confirm.  
Press the back arrow to go back a level or  
confirm.  
The system’s Open Source Software  
(OSS) source codes are available at the  
following addresses:  
https://www.groupe-psa.com/fr/oss/  
https://www.groupe-psa.com/en/oss/  
Multimedia audio system -  
Applications - Bluetooth®  
telephone  
The touch screen is of the "capacitive"  
type.  
To clean the screen, use a soft, non-abrasive  
cloth (e.g. spectacles cloth) with no additional  
product.  
Do not use sharp objects on the screen.  
Do not touch the screen with wet hands.  
The functions and settings described  
vary according to the vehicle version and  
configuration, as well as the country of sale.  
First steps  
With the engine running, a press mutes  
the sound.  
With the ignition off, a press turns the system on.  
Increase or decrease the volume using  
the wheel or the "plus" or "minus" buttons  
(depending on the equipment).  
Use the buttons on either side of or below the  
touch screen to access the menus, then press  
the virtual buttons on the touch screen.  
Depending on the model, use the "Source" and  
"Menu" buttons on the left of the touch screen to  
For safety reasons and because they  
require sustained attention by the driver,  
the following operations must be carried out  
with the vehicle stationary and the ignition  
on:  
– Pairing the smartphone with the system via  
Bluetooth.  
– Using the smartphone.  
Certain information is displayed permanently in  
the upper bar of the touch screen:  
– Air conditioning status information (depending  
on version), and direct access to the  
corresponding menu.  
– Radio Media and Telephone menu status  
information.  
– Privacy status information.  
223  
PEUGEOT Connect Radio  
– Access to the touch screen and digital  
instrument panel settings.  
Audio source selection (depending on  
equipment):  
– FM/DAB/AM radio stations (depending on  
equipment).  
enter standby mode (with the screen and  
sound off) for 5 minutes or more.  
The system will resume normal operation  
when the temperature in the passenger  
compartment has dropped.  
Increase volume.  
Decrease volume.  
Mute/restore sound by simultaneously  
pressing the increase and decrease  
– Telephone connected via Bluetooth and  
Bluetooth multimedia broadcast (streaming).  
– USB Memory stick.  
– Media player connected via the auxiliary  
socket (depending on equipment).  
volume buttons.  
Steering mounted controls  
Steering mounted controls -  
Type 2  
Steering mounted controls -  
Type 1  
Voice commands:  
This control is located on the steering  
wheel or at the end of the lighting control stalk  
(depending on equipment).  
Short press, smartphone voice commands via  
the system.  
Radio:  
Select the previous/next preset radio  
station.  
Select the previous/next item in a menu or a list.  
Media:  
Select the previous/next track.  
Select the previous/next item in a menu or a list.  
Radio:  
Short press: display the list of radio  
stations.  
Increase volume.  
Decrease volume.  
Mute by pressing the volume increase  
and decrease buttons simultaneously  
(depending on equipment).  
Restore the sound by pressing one of the two  
volume buttons.  
In the "Settings" menu, it is possible to  
create a profile for an individual or for a  
group of people with shared interests, and  
configure a wide range of settings (radio  
presets, audio settings, ambiences, etc.).  
Settings are applied automatically.  
Long press: update the list.  
Media:  
Short press: display the list of folders.  
Long press: display the available sorting options.  
Change audio source (radio; USB; AUX if  
equipment connected; CD; streaming).  
Confirm a selection.  
Media (short press): change the  
multimedia source.  
Telephone (short press): start telephone  
call.  
In very hot conditions, the volume may  
be limited to protect the system. It may  
Call in progress (short press): access  
telephone menu.  
224  
PEUGEOT Connect Radio  
Telephone (long press): reject an incoming call,  
end call; when no call is in progress, access  
telephone menu.  
Radio Media  
Settings  
10  
Radio (rotate): automatic search for the  
previous/next station.  
Media (rotate): previous/next track, move in a  
list.  
Short press: confirm a selection; if nothing  
selected, access to presets.  
Radio: display the list of stations.  
Media: display the list of tracks.  
Radio (press and hold): update the list of  
stations received.  
Select an audio source or radio station.  
Configure a personal profile and/or  
configure the sound (balance, ambience,  
etc.) and the display (language, units, date, time,  
etc.).  
Menus  
Telephone  
Applications  
Driving  
Connect a mobile phone via Bluetooth®.  
Run certain applications from a  
smartphone connected via CarPlay® or Android  
Auto.  
Access configurable equipment.  
Activate, deactivate or configure certain  
vehicle functions.  
225  
PEUGEOT Connect Radio  
Press this button to search and select a  
recipient.  
Navigation  
Applications  
Select the "Quick messages” tab.  
Viewing photos  
Insert a USB memory stick in the USB port.  
Press this button to select the display  
settings for messages.  
Press this button to write a new message.  
To protect the system, do not use a USB  
hub.  
The system can read folders and image files in  
the formats: .tiff; .gif; .jpg/jpeg; .bmp and .png.  
Press Applications to display the main  
page.  
Press the bin alongside the selected  
message to delete it.  
Press this button alongside the selected  
message to display the secondary page.  
Press this button to edit and modify the  
existing text.  
Configure the navigation and select your  
destination via CarPlay® or Android Auto.  
Press "Photos".  
Select a folder.  
Press this button to write a new message.  
Air conditioning  
Select an image to view.  
Press the bin to delete the message.  
Press this button to display the details of  
the photo.  
Press the back arrow to go back a level.  
Radio  
18,5  
21,5  
Selecting a station  
Managing messages  
Press Radio Media to display the main  
page.  
Press Applications to display the main  
Press one of the buttons to perform an  
automatic search for radio stations.  
Or  
page.  
Press "SMS".  
Manage various temperature and air flow  
settings.  
Move the slider to manually search for  
frequencies up or down.  
Or  
Select the "SMS” tab.  
Press this button to select the display  
settings for messages.  
Press the frequency.  
226  
PEUGEOT Connect Radio  
Enter the FM and AM waveband values  
using the virtual keypad.  
Press "OK" to confirm.  
Or  
Press the "OPTIONS" button to access the  
secondary page.  
10  
Select a radio station or frequency.  
Press "Preset".  
Activate/deactivate "News".  
Make a long press on one of the buttons  
to preset the station.  
Press in the shaded area to confirm.  
Radio reception may be affected by the  
use of electrical equipment not approved  
by the Brand, such as a USB charger  
connected to the 12 V socket.  
The exterior environment (hills, buildings,  
tunnels, basement car parks, etc.) may  
block reception, including in RDS mode.  
This phenomenon is perfectly normal in the  
context of radio wave transmission, and  
in no way indicative of an audio system  
malfunction.  
Activating/Deactivating RDS  
Playing TA messages  
RDS, if activated, allows you to continue  
listening to the same station by automatically  
retuning to alternative frequencies.  
Press Radio Media to display the main  
page.  
The TA (Traffic Announcement) function gives  
priority to TA alert messages. To operate, this  
function needs good reception of a radio station  
that transmits this type of message. While traffic  
information is being broadcast, the current  
media is automatically interrupted so that the  
TA message can be heard. Normal play of the  
previously playing media resumes at the end of  
the message.  
Press the "OPTIONS" button to access the  
secondary page.  
Activate/deactivate "RDS".  
Press in the shaded area to confirm.  
Changing the waveband  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
Press Radio Media to display the main  
page.  
RDS station tracking may not be  
available nationwide, as many radio  
stations do not cover 100 % of the country.  
This explains the loss of reception of the  
station during a journey.  
Press the "OPTIONS" button to access the  
secondary page.  
Activate/deactivate "TA".  
Press "Band" to change waveband.  
Press in the shaded area to confirm.  
Press in the shaded area to confirm.  
Displaying text information  
Audio settings  
The "Radio Text" function displays information  
transmitted by the radio station relating to the  
station or the currently playing song.  
Press Radio Media to display the main  
page.  
Presetting a station  
Press Radio Media to display the main  
page.  
Select a radio station or frequency.  
Make a short press on the star outline. If  
the star is solid, the radio station is  
already preset.  
Press the "OPTIONS" button to access the  
secondary page.  
Press "Audio settings".  
227  
PEUGEOT Connect Radio  
Select the "Tone", "Balance", "Sound",  
"Voice" or "Ringtones" tab to configure  
the sound settings.  
Press in the shaded area to confirm.  
DAB (Digital Audio  
Broadcasting) radio  
If "FM-DAB Follow-up" is activated, there  
may be a time offset of a few seconds  
when the system switches to "FM" analogue  
radio, and in some cases a change in volume.  
When the digital signal quality is restored, the  
system automatically changes back to "DAB".  
Press the back arrow to confirm.  
Terrestrial Digital Radio  
Digital radio provides higher quality sound.  
The various "multiplexes/ensembles" offer a  
choice of radio stations organised in alphabetical  
order.  
In the "Tone" tab, the Ambience, Bass,  
Medium and Treble sound settings are  
different and independent for each audio  
source.  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
In the "Balance” tab, the All passengers,  
Driver and Front only settings are common  
to all sources.  
In the "Sound” tab, activate or deactivate  
"Volume linked to speed", "Auxiliary input"  
and "Touch tones".  
If the "DAB" station being listened to is  
not available on "FM", or if "FM-DAB  
Follow-up" is not activated, the sound will cut  
out while the digital signal is too weak.  
Press "Band" to select "DAB band".  
Press in the shaded area to confirm.  
Media  
The balance/distribution (or spatialisation  
with the Arkamys© system) uses audio  
processing to adjust the sound quality  
according to the number of passengers in the  
vehicle.  
FM-DAB Follow-up  
USB port  
"DAB" does not cover 100 % of the country.  
When the digital radio signal is poor, the  
"FM-DAB Follow-up" enables you to continue  
listening to the same station by automatically  
switching to the corresponding "FM" analogue  
station (if there is one).  
Insert the USB memory stick into the USB  
port or connect the USB device to the  
USB port using a suitable cable (not supplied).  
Onboard audio: Arkamys Sound Staging©  
optimises the sound distribution inside  
the passenger compartment.  
To protect the system, do not use a USB  
hub.  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
The system builds playlists (in temporary  
memory); this operation can take from a  
few seconds to several minutes at the first  
connection.  
Activate/deactivate "FM-DAB Follow-up".  
Reduce the number of non-music files and the  
number of folders to reduce the waiting time.  
228  
PEUGEOT Connect Radio  
Playlists are updated whenever the ignition  
is switched off or a USB memory stick is  
connected. The audio system memorises these  
lists, which will subsequently load faster if they  
have not been changed.  
If play does not start automatically, it may be  
necessary to start the audio playback from the  
smartphone.  
Control is from the portable device or by using  
the system's touch buttons.  
Information and advice  
10  
The system supports USB mass storage  
devices, BlackBerry® devices or Apple® players  
via the USB ports. The adapter cable is not  
supplied.  
Devices are managed using the audio system  
controls.  
Other devices, not recognised on connection,  
must be connected to the auxiliary socket using  
a jack cable (not supplied) or via Bluetooth  
streaming, if compatible.  
Once connected in Streaming mode, the  
smartphone is considered to be a media  
source.  
Auxiliary (AUX) jack socket  
Depending on equipment  
Connect a portable device (MP3 player,  
etc.) to the auxiliary jack socket using an  
audio cable (not supplied).  
This source is only available if "Auxiliary input"  
has been selected in the audio settings.  
First adjust the volume on the portable device  
(to a high level). Then adjust the volume of the  
audio system.  
Connecting Apple® players  
Connect the Apple® player to the USB socket  
using a suitable cable (not supplied).  
Play starts automatically.  
To protect the system, do not use a USB  
hub.  
Control is via the audio system.  
The audio system will only play audio files with  
".wav", ".wma", ".aac", ".ogg" and ".mp3" file  
extensions, at bit rates between 32 Kbps and  
320 Kbps.  
It also supports VBR (Variable Bit Rate) mode.  
No other file types (".mp4", etc.) can be read.  
All ".wma" files must be standard WMA 9 files.  
The supported sampling rates are 11, 22, 44 and  
48 KHz.  
To avoid reading and display problems, we  
recommend choosing file names less than 20  
characters long that do not contain any special  
characters (e.g. “ ? . ; ù).  
Use only USB memory sticks in FAT32 format  
(File Allocation Table).  
The classifications available are those of  
the portable device connected (artists/  
albums/genres/playlists/audio books/  
podcasts). It is also possible to use a  
classification structured in the form of a  
library.  
The default classification used is by artist. To  
modify the classification used, return to the  
first level of the menu then select the desired  
classification (playlists for example) and  
confirm to go down through the menu to the  
desired track.  
Controls are managed via the portable device.  
Selecting the source  
Press Radio Media to display the main  
page.  
Press the "SOURCES" button.  
Select the source.  
Bluetooth Streaming®  
Streaming allows you to listen to the audio feed  
from your smartphone.  
The Bluetooth profile must be activated.  
First adjust the volume on the portable device  
(to a high level). Then adjust the volume of the  
system.  
The version of software in the audio system may  
not be compatible with the generation of the  
Apple® player.  
We recommend using the original USB  
cable for the portable device.  
229  
PEUGEOT Connect Radio  
On connecting the USB cable, the  
CarPlay® function deactivates the  
system's Bluetooth® mode.  
The "CarPlay" function requires the use of  
a compatible smartphone and compatible  
applications.  
Android Auto smartphone  
connection  
Telephone  
USB sockets  
Depending on country.  
Depending on equipment, for more information  
on the USB sockets compatible with CarPlay® or  
Android Auto applications, refer to the "Ease of  
use and comfort" section.  
On the smartphone, download the  
Android Auto application.  
The "Android Auto" function requires the  
use of a compatible smartphone and  
applications.  
Connect the USB cable. The smartphone  
charges when connected by the USB  
cable.  
From the system, press Telephone to  
display the CarPlay® interface.  
Or  
If the smartphone has already connected  
by Bluetooth®.  
Connect the USB cable. The smartphone  
charges when connected by the USB  
cable.  
For the list of compatible smartphones,  
visit the Manufacturer's website in your  
country.  
Telephone not connected by  
Bluetooth®  
Synchronising a smartphone enables  
users to display applications that support  
the smartphone’s CarPlay® or Android Auto  
technology on the vehicle’s screen. For  
CarPlay® technology, the CarPlay® function  
must first be activated on the smartphone.  
Unlock the smartphone for the communication  
process between the smartphone and the  
system to work.  
As principles and standards are constantly  
changing, we recommend keeping the  
smartphone's operating system up-to-  
date, together with the date and time on  
the smartphone and the system.  
Connect a USB cable. The smartphone  
charges when connected by a USB cable.  
From the system, press "Telephone" to  
display the main page.  
Press "Android Auto" to start the  
application in the system.  
From the system, press "Telephone" to  
display the main page.  
Press the "PHONE" button to go to the  
secondary page.  
Depending on the smartphone, it may be  
necessary to activate the "Android Auto"  
function.  
During the procedure, several screen  
pages relating to certain features are  
displayed.  
Accept to start and complete the connection.  
When connecting a smartphone to the  
system, we recommend enabling  
Bluetooth® on the smartphone.  
Press "CarPlay" to display the CarPlay®  
interface.  
When the USB cable is disconnected  
and the ignition is switched off then back  
on, the system will not automatically switch to  
Radio Media mode; the source must be  
changed manually.  
CarPlay® smartphone  
connection  
Depending on country.  
The CarPlay® navigation can be accessed Telephone connected by Bluetooth®  
at any time by pressing the system's  
From the system, press "Telephone" to  
Navigation button.  
display the main page.  
230  
PEUGEOT Connect Radio  
Press the "PHONE" button to display the  
secondary page.  
If the pairing procedure fails, we  
recommend deactivating and then  
reactivating the Bluetooth function on the  
telephone.  
Depending on the type of telephone, you may by  
prompted to accept the transfer of contacts and  
messages.  
10  
Press "Android Auto" to start the  
application in the system.  
Access to the different audio sources remains  
available in the margin of the Android Auto  
display, using the touch buttons located in the  
upper bar.  
The ability of the system to connect just  
one profile depends on the telephone.  
All three profiles may connect by default.  
Procedure from the telephone  
Select the name of the system in the list  
of detected devices.  
In the system, accept the connection request  
from the telephone.  
The profiles compatible with the system  
are: HFP, OPP, PBAP, A2DP, AVRCP,  
MAP and PAN.  
Access to the menus for the system is possible  
at any time using the dedicated buttons.  
There may be a pause before  
applications become available,  
depending on the quality of the network.  
Visit the Brand's website for more information  
(compatibility, additional help, etc.).  
Procedure from the system  
Press Telephone to display the main  
page.  
Press "Bluetooth search".  
The list of detected telephones is  
displayed.  
Automatic reconnection  
Pairing a Bluetooth®  
telephone  
On returning to the vehicle, if the last telephone  
connected is present again, it is automatically  
recognised and within about 30 seconds  
after switching on the ignition, the pairing is  
established automatically (Bluetooth activated).  
To modify the connection profile:  
Press Telephone to display the main  
page.  
Select the name of the chosen telephone  
in the list.  
The services available depend on the  
network, the SIM card and the  
compatibility of the Bluetooth devices used.  
Consult the telephone user guide and the  
service provider to check which services are  
available.  
Connection sharing  
The system offers to connect the telephone with  
3 profiles:  
– "Telephone" (hands-free kit, telephone only),  
– “Streaming" (streaming: wireless playing of  
audio files on the telephone),  
Press the "PHONE" button to access the  
secondary page.  
The Bluetooth function must be activated  
and the telephone configured as "Visible  
to all” (in the telphone settings).  
Press "Bluetooth connection" to  
display the list of paired devices.  
Press the "Details" button for a paired  
device.  
– "Mobile internet data".  
Select one or more profiles.  
To complete the pairing, whichever procedure is  
used (from the telephone or from the system),  
ensure that the code is the same in the system  
and in the telephone.  
Select one or more profiles.  
Press "OK" to confirm.  
231  
PEUGEOT Connect Radio  
Press "OK" to confirm.  
on the steering mounted PHONE button  
Press "Call".  
to reject the call.  
Or  
Managing paired telephones  
Calling a recently used  
number  
Press "End call".  
This function lets you connect or disconnect a  
device or delete a pairing.  
Press Telephone to display the main  
page.  
Press the "PHONE" button to access the  
secondary page.  
Press "Bluetooth connection" to  
display the list of paired devices.  
Press on the name of the telephone  
selected in the list to disconnect it.  
Press again to connect it.  
Press Telephone to display the main  
Making a call  
page.  
Or  
Using the telephone is not recommended  
while driving.  
Parking the vehicle.  
Make the call using the steering mounted  
controls.  
Press and hold  
the steering mounted button.  
Press "Recent calls".  
Select the desired contact from the displayed list.  
Calling a new number  
It is always possible to make a call  
directly from the telephone; as a safety  
measure, first park the vehicle.  
Press Telephone to display the main  
page.  
Enter the phone number using the digital  
keypad.  
Deleting a telephone  
Press the basket at the top right of the  
screen to display a basket alongside the  
telephone chosen.  
Press "Call" to start the call.  
Setting the ringtone  
Press the basket alongside the telephone  
chosen to delete it.  
Press Telephone to display the main  
page.  
Calling a contact  
Press the "OPTIONS" button to access the  
secondary page.  
Receiving a call  
Press Telephone to display the main  
page.  
An incoming call is announced by a ring and a  
superimposed display in the screen.  
Make a short press on the steering  
mounted PHONE button to accept an  
incoming call.  
Press "Ring volume" to display the  
volume bar.  
Press the arrows or move the slider to set  
the ring volume.  
Or press and hold  
the steering mounted PHONE button.  
And  
Press "Contacts".  
Select the desired contact from the displayed list.  
Make a long press  
232  
PEUGEOT Connect Radio  
Press Settings to display the main page.  
Modifying system settings  
Settings  
10  
Press Settings to display the main page.  
Press "Configuration" to access the  
secondary page.  
Press "Screen configuration".  
Configuring profiles  
Press "Configuration" to access the  
secondary page.  
Press Settings to display the main page.  
Press "System configuration".  
Press "Profiles".  
Press "Brightness".  
Move the slider to adjust the brightness of  
the screen and/or the instrument panel  
(depending on version).  
Press the back arrow to confirm.  
Press the "Units" tab to change the units of  
distance, fuel consumption and temperature.  
Press the "Factory settings" tab to restore the  
initial settings.  
Select "Profile 1", "Profile 2", "Profile 3” or  
"Common profile".  
Press this button to enter a name for the  
profile using the virtual keypad.  
Press "OK" to save.  
Returning the system to factory settings  
activates the English language by default  
(depending on version).  
Press "Animation".  
Activate or deactivate: “Automatic  
scrolling”.  
Press the back arrow to confirm.  
Select "Animated transitions".  
Press the "System info" tab to display the  
versions of the various modules installed in the  
system.  
Press this button to activate the profile.  
Press the back arrow again to confirm.  
Press the back arrow to confirm.  
Press the "Privacy" tab,  
or  
Press this button to reset the selected  
profile.  
Selecting the language  
Press Settings to display the main page.  
Press Settings to display the main page.  
Press "Privacy" to activate or deactivate  
the private data mode.  
Activate or deactivate:  
Adjusting the brightness  
Press "Configuration" to access the  
secondary page.  
Select "Language" to change the  
language.  
Press Settings to display the main page.  
Press Brightness.  
– "No sharing (data, vehicle position)".  
– "Only data sharing”  
– "Data and vehicle position sharing"  
Press the back arrow to confirm.  
Press the back arrow to confirm.  
Move the slider to adjust the brightness of  
the screen and/or the instrument panel  
(depending on version).  
Setting the time  
Press in the shaded area to confirm.  
Press Settings to display the main page.  
233  
PEUGEOT Connect Radio  
Press "Configuration" to access the  
Press this button to set the date.  
The environment (hills, buildings, tunnels,  
basement car parks, etc.) is blocking reception,  
including in RDS mode.  
This is a perfectly normal phenomenon, and is  
not indicative of an audio system malfunction.  
The aerial is missing or has been damaged  
(for example while entering a car wash or  
underground car park).  
secondary page.  
Press "Date and time".  
Press the back arrow to save the date.  
Select the display format for the date.  
Press the back arrow again to confirm.  
Select "Time".  
Press this button to set the time using the  
virtual keypad.  
Press "OK" to save the time.  
► Have the aerial checked by a dealer.  
I cannot find some radio stations in the list of  
received stations.  
Time and date setting is only available if  
"GPS Synchronisation:" is deactivated.  
Press this button to set the time zone.  
Select the display format for the time  
(12h/24h).  
Activate or deactivate summer time (+1  
hour).  
Activate or deactivate GPS  
synchronisation (UTC).  
Press the back arrow to save the settings.  
The name of the radio station changes.  
The station is no longer received or its name has  
changed in the list.  
► Press the round arrow on the "List" tab on the  
"Radio" page.  
Some radio stations send other information  
in place of their name (the title of the song for  
example).  
Frequently asked  
questions  
The following information groups together the  
answers to the most frequently asked questions  
concerning the system.  
The system interprets these details as the station  
name.  
► Press the round arrow on the "List" tab on the  
"Radio" page.  
The system may not automatically  
manage the change between winter and  
summer time (depending on the country of  
sale).  
Radio  
The reception quality of the tuned radio  
station gradually deteriorates or the station  
presets are not working (no sound, 87.5 MHz  
is displayed, etc.).  
Media  
The vehicle is too far from the selected station’s  
transmitter, or no transmitter is present in the  
geographical area.  
► Activate the "RDS" function in the upper bar  
to enable the system to check whether there is  
a more powerful transmitter in the geographical  
area.  
Setting the date  
Playback of my USB memory stick starts only  
after a very long wait (around 2 to 3 minutes).  
Some files supplied with the memory stick may  
greatly slow down access to reading the memory  
stick (multiplication by 10 of the cataloguing  
time).  
Press Settings to display the main page.  
Press "Configuration" to access the  
secondary page.  
Press "Date and time".  
Select "Date".  
234  

Popular Manuals

2023 Ford Focus 4 Door
2017-2023 Honda Civic 4 Door
2023 Toyota Corolla 4 Door
2023 Ford Fiesta 4 Door
2023 Honda CR-V SUV
2023 Volkswagen Golf 4 Door
2023 Honda Accord 4 Door
2022 BMW 5 Series 4 Door
2024 Audi A3 4 Door
2024 BMW X5 SUV
2022 BMW 3 Series 4 Door
2023 Kia Sorento SUV
2022 Mercedes E Class 4 Door
2023 Mercedes C Class 4 Door
2023 Volkswagen Tiguan 4 Door
2024 Subaru Forester SUV
2023 Mazda Cx-5 SUV
2023 Hyundai Santa Fe SUV
2020 Nissan Qashqai SUV
2020 Ford Kuga SUV
2020 Kia Sportage SUV
2020 Audi Q3 SUV
2020 Audi Q5 SUV
2020 Land Rover Evoque SUV
2020 Nissan Juke SUV
2020 Hyundai Tucson SUV
2020 Peugeot 3008 SUV
2020 Volvo XC40 SUV
2020 Land Rover Discovery Sport SUV