PEUGEOT Connect Radio -> Media for Your Peugeot 3008 SUV 2020

PEUGEOT Connect Radio  
Select the "Tone", "Balance", "Sound",  
"Voice" or "Ringtones" tab to configure  
the sound settings.  
Press in the shaded area to confirm.  
DAB (Digital Audio  
Broadcasting) radio  
If "FM-DAB Follow-up" is activated, there  
may be a time offset of a few seconds  
when the system switches to "FM" analogue  
radio, and in some cases a change in volume.  
When the digital signal quality is restored, the  
system automatically changes back to "DAB".  
Press the back arrow to confirm.  
Terrestrial Digital Radio  
Digital radio provides higher quality sound.  
The various "multiplexes/ensembles" offer a  
choice of radio stations organised in alphabetical  
order.  
In the "Tone" tab, the Ambience, Bass,  
Medium and Treble sound settings are  
different and independent for each audio  
source.  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
In the "Balance” tab, the All passengers,  
Driver and Front only settings are common  
to all sources.  
In the "Sound” tab, activate or deactivate  
"Volume linked to speed", "Auxiliary input"  
and "Touch tones".  
If the "DAB" station being listened to is  
not available on "FM", or if "FM-DAB  
Follow-up" is not activated, the sound will cut  
out while the digital signal is too weak.  
Press "Band" to select "DAB band".  
Press in the shaded area to confirm.  
Media  
The balance/distribution (or spatialisation  
with the Arkamys© system) uses audio  
processing to adjust the sound quality  
according to the number of passengers in the  
vehicle.  
FM-DAB Follow-up  
USB port  
"DAB" does not cover 100 % of the country.  
When the digital radio signal is poor, the  
"FM-DAB Follow-up" enables you to continue  
listening to the same station by automatically  
switching to the corresponding "FM" analogue  
station (if there is one).  
Insert the USB memory stick into the USB  
port or connect the USB device to the  
USB port using a suitable cable (not supplied).  
Onboard audio: Arkamys Sound Staging©  
optimises the sound distribution inside  
the passenger compartment.  
To protect the system, do not use a USB  
hub.  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
The system builds playlists (in temporary  
memory); this operation can take from a  
few seconds to several minutes at the first  
connection.  
Activate/deactivate "FM-DAB Follow-up".  
Reduce the number of non-music files and the  
number of folders to reduce the waiting time.  
228  
PEUGEOT Connect Radio  
Playlists are updated whenever the ignition  
is switched off or a USB memory stick is  
connected. The audio system memorises these  
lists, which will subsequently load faster if they  
have not been changed.  
If play does not start automatically, it may be  
necessary to start the audio playback from the  
smartphone.  
Control is from the portable device or by using  
the system's touch buttons.  
Information and advice  
10  
The system supports USB mass storage  
devices, BlackBerry® devices or Apple® players  
via the USB ports. The adapter cable is not  
supplied.  
Devices are managed using the audio system  
controls.  
Other devices, not recognised on connection,  
must be connected to the auxiliary socket using  
a jack cable (not supplied) or via Bluetooth  
streaming, if compatible.  
Once connected in Streaming mode, the  
smartphone is considered to be a media  
source.  
Auxiliary (AUX) jack socket  
Depending on equipment  
Connect a portable device (MP3 player,  
etc.) to the auxiliary jack socket using an  
audio cable (not supplied).  
This source is only available if "Auxiliary input"  
has been selected in the audio settings.  
First adjust the volume on the portable device  
(to a high level). Then adjust the volume of the  
audio system.  
Connecting Apple® players  
Connect the Apple® player to the USB socket  
using a suitable cable (not supplied).  
Play starts automatically.  
To protect the system, do not use a USB  
hub.  
Control is via the audio system.  
The audio system will only play audio files with  
".wav", ".wma", ".aac", ".ogg" and ".mp3" file  
extensions, at bit rates between 32 Kbps and  
320 Kbps.  
It also supports VBR (Variable Bit Rate) mode.  
No other file types (".mp4", etc.) can be read.  
All ".wma" files must be standard WMA 9 files.  
The supported sampling rates are 11, 22, 44 and  
48 KHz.  
To avoid reading and display problems, we  
recommend choosing file names less than 20  
characters long that do not contain any special  
characters (e.g. “ ? . ; ù).  
Use only USB memory sticks in FAT32 format  
(File Allocation Table).  
The classifications available are those of  
the portable device connected (artists/  
albums/genres/playlists/audio books/  
podcasts). It is also possible to use a  
classification structured in the form of a  
library.  
The default classification used is by artist. To  
modify the classification used, return to the  
first level of the menu then select the desired  
classification (playlists for example) and  
confirm to go down through the menu to the  
desired track.  
Controls are managed via the portable device.  
Selecting the source  
Press Radio Media to display the main  
page.  
Press the "SOURCES" button.  
Select the source.  
Bluetooth Streaming®  
Streaming allows you to listen to the audio feed  
from your smartphone.  
The Bluetooth profile must be activated.  
First adjust the volume on the portable device  
(to a high level). Then adjust the volume of the  
system.  
The version of software in the audio system may  
not be compatible with the generation of the  
Apple® player.  
We recommend using the original USB  
cable for the portable device.  
229  
PEUGEOT Connect Radio  
On connecting the USB cable, the  
CarPlay® function deactivates the  
system's Bluetooth® mode.  
The "CarPlay" function requires the use of  
a compatible smartphone and compatible  
applications.  
Android Auto smartphone  
connection  
Telephone  
USB sockets  
Depending on country.  
Depending on equipment, for more information  
on the USB sockets compatible with CarPlay® or  
Android Auto applications, refer to the "Ease of  
use and comfort" section.  
On the smartphone, download the  
Android Auto application.  
The "Android Auto" function requires the  
use of a compatible smartphone and  
applications.  
Connect the USB cable. The smartphone  
charges when connected by the USB  
cable.  
From the system, press Telephone to  
display the CarPlay® interface.  
Or  
If the smartphone has already connected  
by Bluetooth®.  
Connect the USB cable. The smartphone  
charges when connected by the USB  
cable.  
For the list of compatible smartphones,  
visit the Manufacturer's website in your  
country.  
Telephone not connected by  
Bluetooth®  
Synchronising a smartphone enables  
users to display applications that support  
the smartphone’s CarPlay® or Android Auto  
technology on the vehicle’s screen. For  
CarPlay® technology, the CarPlay® function  
must first be activated on the smartphone.  
Unlock the smartphone for the communication  
process between the smartphone and the  
system to work.  
As principles and standards are constantly  
changing, we recommend keeping the  
smartphone's operating system up-to-  
date, together with the date and time on  
the smartphone and the system.  
Connect a USB cable. The smartphone  
charges when connected by a USB cable.  
From the system, press "Telephone" to  
display the main page.  
Press "Android Auto" to start the  
application in the system.  
From the system, press "Telephone" to  
display the main page.  
Press the "PHONE" button to go to the  
secondary page.  
Depending on the smartphone, it may be  
necessary to activate the "Android Auto"  
function.  
During the procedure, several screen  
pages relating to certain features are  
displayed.  
Accept to start and complete the connection.  
When connecting a smartphone to the  
system, we recommend enabling  
Bluetooth® on the smartphone.  
Press "CarPlay" to display the CarPlay®  
interface.  
When the USB cable is disconnected  
and the ignition is switched off then back  
on, the system will not automatically switch to  
Radio Media mode; the source must be  
changed manually.  
CarPlay® smartphone  
connection  
Depending on country.  
The CarPlay® navigation can be accessed Telephone connected by Bluetooth®  
at any time by pressing the system's  
From the system, press "Telephone" to  
Navigation button.  
display the main page.  
230