Get Practical information -> Advice on care and maintenance Guide for Peugeot 3008 SUV 2020

Practical information

► While depressing the brake pedal, switch oﬀ

the ignition.

► Release the brake pedal, then switch on the

ignition again.

► While depressing the brake pedal, press the

control lever to release the parking brake.

► Release the brake pedal, then switch oﬀ the

ignition.

If the 5-second time limit is exceeded, the

gearbox engages mode P; it is then necessary to

restart the procedure.

move the electronic key away and deactivate

the “hands-free” function (Hands-Free

Access).

When using a pressure washer, hold the

lance at least 30 cm from the vehicle

(particularly when cleaning areas containing

chipped paint, sensors or seals).

Promptly clean up any stains containing

chemicals liable to damage the vehicle's paint

(including tree resin, bird droppings, insect

secretions, pollen and tar).

If justiﬁed by the environment, clean the

vehicle frequently to remove salty deposits (in

coastal areas), soot (in industrial areas) and

mud (in wet or cold areas). These substances

can be highly corrosive.

Contact a PEUGEOT dealer or a qualiﬁed

workshop for advice on removing stubborn

stains requiring special products (such as tar

or insect removers).

Preferably, have paint touch-ups performed

by a PEUGEOT dealer or a qualiﬁed

workshop.

Reverting to normal operation

► While depressing the brake pedal, restart the

engine.

Keyless Entry and Starting

You must not depress the brake pedal

while switching the ignition on again, then

switching it oﬀ. If you do, the engine will start,

requiring you to restart the procedure.

Reverting to normal operation

► While depressing the brake pedal, restart the

engine.

With an automatic gearbox

and electric parking brake

Advice on care and

maintenance

Release procedure

General recommendations

Observe the following recommendations to avoid

damaging the vehicle.

► With the vehicle stationary and the engine

running, select mode N and switch oﬀ the

ignition.

Exterior

Within 5 seconds:

► Switch on the ignition again.

► While depressing the brake pedal, move the

push selector forwards or backwards to conﬁrm

mode N.

► While depressing the brake pedal, press the

control lever to release the parking brake.

► Release the brake pedal, switch oﬀ the

ignition.

Never use a high-pressure jet wash in

the engine compartment - risk of

damaging the electrical components!

Do not wash the vehicle in bright sunshine or

extremely cold conditions.

Interior

When washing the vehicle, never use a

water hose or high-pressure jet to clean

the interior.

Liquids carried in cups or other open

containers can spill, presenting a risk of

damage to the instruments and controls and

When washing the vehicle in an

automatic roller-brush car wash, be sure

to lock the doors and, depending on version,

187

Practical information

the controls located on the centre console. Be

vigilant!

Never attempt to clean without water.

Never clean your vehicle in an automatic

roller-brush car wash.

Never select the programme with hot wax

ﬁnish.

Use a high-ﬂow hose (temperature

between 25°C and 40°C).

Place the jet of water perpendicular to the

surface to be cleaned.

Bodywork

Rinse the vehicle with demineralised water.

Never use high-pressure lances equipped

with brushes - risk of scratching paint!

Never apply glossy polish or preservatives to

the bodywork or alloy wheels; these products

irreversibly reveal glossy or spotted areas.

High-gloss paint

Leather

Do not use abrasive products, solvents,

petrol or oil to clean the bodywork.

Never use an abrasive sponge to clean

stubborn stains - risk of scratching the

paintwork!

Leather is a natural product. Appropriate regular

care is essential for its durability.

It must be protected and nourished using a

speciﬁc leather product, to keep it supple and

preserve its original appearance.

Choose high-pressure wash, or at least

high-ﬂow water jet.

Rinse the vehicle with demineralised water.

Only a clean microﬁbre cloth is recommended

for wiping the vehicle; pass it over the vehicle

without rubbing.

Carefully wipe oﬀ any fuel spilt on the

bodywork using a soft cloth, then allow to dry.

Clean oﬀ minor marks (for example, ﬁnger

marks), using a maintenance product

recommended by PEUGEOT.

Do not apply polish in strong sunshine, or to

plastic or rubber parts.

Do not clean leather using unsuitable

cleaning agents such as solvents,

detergents, petrol or pure alcohol.

When cleaning items partly made from

leather, take care not to damage the other

materials with the speciﬁc leather product.

Use a soft cloth and soapy water or a pH

neutral product.

Gently wipe the bodywork with a clean

microﬁbre cloth.

Apply polish with the vehicle clean and dry.

Comply with the instructions for use stated on

the product.

Before cleaning greasy stains or liquids,

quickly mop up any surplus.

Before cleaning, wipe oﬀ any residues liable

to scuﬀ the leather, using a cloth that has

been dampened with demineralised water

and thoroughly wrung out.

Clean leather using a soft cloth moistened

with soapy water or a pH-neutral product.

Dry with a soft, dry cloth.

Textured paint

Decals

This type of paint reacts under the eﬀect of

light, through variations in appearance and

ﬁnish that highlight the lines and contours of the

vehicle. Its varnish is enriched with particles that

remain visible and create a unique satin eﬀect

with relief. Its slightly granular texture gives it a

surprising touch.

(Depending on version)

Do not use a high-pressure washer to

clean the vehicle - risk of damaging or

detaching the decals!

188

Practical information -> Advice on care and maintenance for Your Peugeot 3008 SUV 2020

Popular Manuals