Safety -> Hazard warning lamps for Your Peugeot 3008 SUV 2020

Safety  
PEUGEOT dealers or qualified workshops,  
equipped with the special tools required (risk  
of malfunctions of the vehicle's electronic  
systems that could cause breakdowns or  
serious accidents). The Manufacturer cannot  
be held responsible if this advice is not  
followed.  
– Any modification or adaptation not intended  
or authorised by PEUGEOT or carried out  
without meeting the technical requirements  
defined by the Manufacturer will result in the  
suspension of the commercial warranty.  
General safety  
recommendations  
Hazard warning lamps  
Do not remove the labels attached in  
different places on your vehicle. They  
include safety warnings as well as  
identification information for the vehicle.  
For all work on your vehicle, use a  
qualified workshop that has the technical  
information, skills and equipment required, all  
of which a PEUGEOT dealer is able to  
provide.  
► Pressing this red button causes all the  
direction indicators to flash.  
They can work with the ignition switched off.  
Installation of accessory radio  
communication transmitters  
Automatic operation of  
hazard warning lamps  
When braking in an emergency, depending on  
the rate of deceleration, the hazard warning  
lamps come on automatically. They switch off  
automatically when you next accelerate.  
They can be turned off by pressing the button  
again.  
Depending on country regulations,  
certain safety equipment may be  
mandatory: high visibility safety vests,  
warning triangles, breathalysers, spare bulbs,  
spare fuses, fire extinguisher, first aid kit, mud  
flaps at the rear of the vehicle, etc.  
Before installing a radio communication  
transmitter with an external aerial, you must  
without fail contact a PEUGEOT dealer for  
the specification of transmitters which can  
be fitted (frequency, maximum power, aerial  
position, specific installation requirements),  
in line with the Vehicle Electromagnetic  
Compatibility Directive (2004/104/EC).  
Installing electrical accessories:  
– The fitting of electrical equipment or  
accessories not approved by PEUGEOT may  
cause excessive current consumption and  
faults and failures with the electrical system  
of your vehicle. Contact a PEUGEOT dealer  
for information on the range of approved  
accessories.  
Declarations of conformity for radio  
equipment  
The relevant certificates are available on the  
website.  
– As a safety measure, access to the  
diagnostic socket, used for the vehicle's  
electronic systems, is reserved strictly for  
84