2024-2025 Peugeot 3008 SUV Dashboard instruments User Manual

MY CAR USER MANUAL

Dashboard instruments for Your Peugeot 3008 SUV Third Generation (2024-2025)

Dashboard instruments  
Matrix display  
3. Personalisable area:  
Matrix instrument panel  
– Digital speedometer (mph or km/h)  
– Display of driving aids  
– Trip computer information  
– Power flow / vehicle charge state (Electric)  
4. Service indicator, then total distance recorder  
(miles or km)  
Dials  
Remaining range (Electric)  
These functions are displayed in turn when  
the ignition is switched on.  
Petrol / Diesel  
Driving mode selected (other than "Normal"  
mode)  
Choosing the displayed  
page  
Electric  
1. Coolant temperature indicator (°C) (Petrol or  
Diesel)  
Thermal comfort consumption indicator  
(Electric)  
2. Analogue speedometer (mph or km/h)  
3. Matrix display  
The matrix display can be personalised using a  
system of pages.  
1. Cruise control / speed limiter settings  
Display of speed limit signs  
2. Gear shift indicator (arrow and recommended  
gear)  
4. Rev counter (x 1,000 rpm), graduation  
depends on the engine (Petrol or Diesel)  
Power indicator (Electric)  
5. Fuel gauge (Petrol or Diesel)  
Charge level indicator (Electric)  
Selector position and gear on automatic  
gearbox (Petrol or Diesel)  
Drive selector position (Electric)  
► Turn the thumbwheel on the left of the  
steering wheel to display and scroll through the  
various pages.  
► Press the thumbwheel to confirm.  
10  
CarManuals2.com  
Dashboard instruments  
If you do not press the thumbwheel, the selected  
page is automatically applied after a few  
moments.  
Display language and units  
These depend on the touch screen  
settings.  
When travelling abroad, the speed must be  
shown in the official units of the country you  
are driving in (mph, miles or km/h, km).  
4. Cruise control/speed limiter settings  
Display of speed limit signs  
5. Gear shift indicator (arrow and recommended  
gear)  
1
Selector position and gear on automatic  
gearbox (Petrol or Diesel)  
Digital instrument panels  
With PEUGEOT i-Connect Advanced -  
PEUGEOT i-Connect  
Drive selector position (Electric)  
Driving mode selected (other than "Normal"  
mode)  
Choice of the displayed page  
By default, pages are memorised in the  
instrument panel.  
This head-up 2D or 3D digital instrument panel  
can be personalised.  
Depending on the display mode selected, some  
information is hidden or presented differently.  
Example with the "Dials" display mode:  
6. Rev counter (x 1,000 rpm) (Petrol or Diesel)  
Power indicator (Electric)  
7. Total distance recorder (miles or km)  
8. Coolant temperature indicator (°C) (Petrol or  
Diesel)  
The default pages are as follows:  
– Dials.  
– Minimal.  
– Energy flows (Electric).  
– Driving aids.  
Petrol / Diesel  
– Navigation (depending on equipment).  
– Personal 1.  
► Turn the thumbwheel on the left of the  
steering wheel to display and scroll through the  
various pages on the instrument panel.  
► Press the thumbwheel to confirm the page.  
The new page is applied immediately.  
If there is no action on the thumbwheel, the  
selected display page is applied automatically  
after a few moments.  
– Personal 2.  
Information displayed on  
the instrument panel  
The information displayed on the instrument  
panel (e.g. warning lamps, indicators) may have  
a fixed or variable location depending on the  
page or the driving aid activated.  
For the functions that have indicator lamps for  
both operation and deactivation, there is only  
one dedicated location.  
Electric  
1. Remaining range (miles or km)  
2. Fuel gauge (Petrol or Diesel)  
Charge level indicator (Electric)  
3. Digital speedometer (mph or km/h)  
When a message is displayed in a  
temporary window, pressing this  
11  
CarManuals2.com  
Dashboard instruments  
thumbwheel will cause this window to  
disappear immediately.  
The settings are changed via the  
Settings > Customization touch screen  
For more information on a system or a function,  
refer to the corresponding section.  
application.  
Persistent warning lamp  
Settings for displayed pages  
For more information on Personalisation -  
Instrument Panel, refer to the corresponding  
section for the Audio equipment and telematics  
systems.  
If a red or orange warning lamp comes on, there  
may be fault which needs further investigation.  
The available settings operations are: addition,  
deletion and layout of pages.  
It is possible to memorise up to 5 pages.  
The colour can also be configured according to  
the selected driving mode.  
The settings are changed via the  
Settings > Customization touch screen  
application.  
If a lamp remains lit  
The references (1), (2) and (3) in the warning  
and indicator lamp description indicate whether  
you should contact a qualified professional in  
addition to the immediate recommended actions.  
(1): You must stop the vehicle.  
Stop as soon as it is safe to do so and switch off  
the ignition.  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
(3): Go to a PEUGEOT dealer or a qualified  
workshop.  
Warning and indicator  
lamps  
Displayed as symbols, the warning and indicator  
lamps inform the driver of the occurrence of a  
malfunction (warning lamps) or of the operating  
status of a system (operation or deactivation  
indicator lamps). Certain lamps light up in two  
ways (fixed or flashing) and/or in several colours.  
Settings for a "Personal" display page  
In the two additional personal pages, the types of  
information available are as follows:  
– Dynamic (Torque, Boost, Power).  
– G-metres.  
– Engine temperatures (Petrol or Diesel).  
– Rev counter (Petrol or Diesel).  
– Energy flows (Electric).  
– Power indicator (Electric).  
– Accessories consumption (Electric).  
– Media.  
Associated warnings  
The illumination of a lamp may be accompanied  
by an audible signal and/or a message displayed  
in a screen.  
Relating the type of alert to the operating status  
of the vehicle allows you to determine whether  
the situation is normal or whether a fault has  
occurred: refer to the description of each lamp  
for further information.  
List of warning and  
indicator lamps  
Red warning/indicator lamps  
– Trip computer.  
– Driving aids.  
– Navigation.  
STOP  
Fixed, associated with another warning  
lamp, accompanied by the display of a  
message and an audible signal.  
A serious fault with the engine, braking system,  
power steering or automatic gearbox or a major  
electrical fault has been detected.  
Carry out (1) and then (2).  
When the ignition is switched on  
The type of information selected in the  
"Personal 1" page is not available in the  
"Personal 2" page.  
Certain red or orange warning lamps come on  
for a few seconds when the ignition is switched  
on. These warning lamps should go off as soon  
as the engine is started.  
12  
CarManuals2.com  
Dashboard instruments  
Engine self-diagnostics system (Petrol or  
Diesel)  
Fixed when the ignition is switched on,  
accompanied by a message.  
It is not possible to start the vehicle while the  
charging cable is connected to the vehicle’s  
connector.  
► With the EAT6 automatic gearbox, move the  
gear selector to position P.  
1
Fixed.  
► With the EAT8 automatic gearbox or drive  
selector, fit the chock against one of the wheels.  
Clean and tighten the terminals. If the warning  
lamp does not go off when the engine is started,  
carry out (2).  
A major engine fault has been  
detected.  
Carry out (1) and then (2).  
Disconnect the charging cable and close the  
flap.  
Maximum coolant temperature (Petrol or  
Diesel)  
Fixed with display blocks lit in red  
(with matrix instrument panel).  
or  
Fixed (except on matrix instrument panel).  
The temperature of the cooling system is too  
high.  
Carry out (1), then wait until the engine has  
cooled down before topping up the level, if  
necessary. If the problem persists, carry out (2).  
Traction battery overheating (Electric)  
Fixed, combined with the STOP  
warning lamp, accompanied by the  
display of a message and an audible signal.  
The traction battery's temperature is too high.  
Carry out (1).  
Evacuate the vehicle as quickly as possible  
and move to a safe distance.  
Carry out (2).  
Door(s) open  
Fixed, associated with a message  
identifying the access.  
A door or the tailgate is not properly closed  
(speed less than 6 mph (10 km/h)).  
Fixed, associated with a message  
identifying the access, accompanied by  
an audible signal.  
A door or the tailgate is not properly closed  
(speed above 6 mph (10 km/h)).  
Traction battery malfunction (Electric)  
Fixed, combined with the Service  
warning lamp, accompanied by the  
display of a message.  
The traction battery has a fault.  
Carry out (2).  
Engine oil pressure (Petrol or Diesel)  
Fixed.  
There is a fault with the engine lubrication  
system.  
Seat belts not fastened/unfastened  
Fixed or flashing, accompanied by an  
increasing audible signal.  
A seat belt has not been fastened or has been  
unfastened.  
Carry out (1) and then (2).  
System malfunction (Electric)  
Fixed.  
12 V battery charge  
Manual parking brake  
Fixed.  
Fixed.  
A fault involving the electric motor or  
traction battery has been detected.  
Carry out (1) and then (2).  
The battery charging circuit is faulty  
(e.g. dirty terminals, loose or severed alternator  
belt).  
Carry out (1).  
If the electric parking brake stops working,  
immobilise the vehicle:  
The parking brake is applied or not  
properly released.  
Electric parking brake  
Fixed.  
Cable connected (Electric)  
Fixed when the ignition is switched on.  
The charging cable is connected to the  
vehicle's connector.  
The electric parking brake is applied.  
Flashing.  
Application/release is faulty.  
► With the manual gearbox, engage a gear.  
13  
CarManuals2.com  
Dashboard instruments  
Carry out (1): park on flat ground (on a level  
surface).  
With a manual gearbox, engage a gear.  
With an automatic gearbox or drive selector,  
select mode P.  
Fixed, accompanied by the display of a  
message.  
If the engine does not start, make the engine  
starting request again, while keeping your foot  
on the pedal.  
One or more major faults, for which there is/are  
no specific warning lamp(s), have been detected.  
Identify the cause of the fault using the message  
displayed on the instrument panel, then carry  
out (3).  
Fixed, accompanied by the message  
"Parking brake fault".  
Automatic release of the electric parking brake is  
unavailable.  
Particle filter (Diesel)  
Fixed, accompanied by an audible signal  
and a message about the risk of particle  
filter blockage.  
Switch off the ignition and carry out (2).  
Braking  
Fixed.  
The particle filter is nearing saturation.  
As soon as traffic conditions allow, regenerate  
the filter by driving at a speed of at least 37 mph  
(60 km/h), with an engine speed of above 2,500  
rpm, until the warning lamp goes off.  
Fixed, accompanied by an audible signal  
and a message indicating that the  
additive level in the particle filter is too low.  
The low level in the additive tank has been  
reached.  
The brake fluid level in the braking circuit  
has dropped significantly.  
Carry out (1), then top up with fluid that complies  
with the manufacturer's recommendations. If the  
problem persists, carry out (2).  
Fixed.  
The electronic brake force  
distribution (EBFD) system is faulty.  
Carry out (1) and then (2).  
Carry out (2).  
Service warning lamp fixed and  
service spanner flashing then  
fixed.  
The servicing interval has been exceeded.  
The vehicle must be serviced as soon as  
possible.  
Top up without delay: carry out (3).  
Orange warning/indicator lamps  
Only with BlueHDi Diesel engines.  
Low fuel level (Petrol or Diesel)  
Fixed, with the blocks lit red,  
accompanied by an audible signal  
(with the matrix instrument panel)  
or  
Fixed, with the reserve level shown in red,  
accompanied by an audible signal and the  
display of a message (except with the matrix  
instrument panel).  
When it first comes on, there are approximately  
5 litres of fuel remaining in the tank (reserve).  
Until the fuel level is topped up, this alert will  
be repeated every time the ignition is switched  
Service  
Engine preheating (Diesel)  
Temporarily on  
(up to approximately 30 seconds in  
severe weather conditions).  
When switching on the ignition, if the weather  
conditions and the engine temperature make it  
necessary.  
Wait until the warning lamp goes off before  
starting.  
When the warning lamp goes off, starting will  
occur immediately if you press and hold:  
– the clutch pedal with a manual gearbox.  
– the brake pedal with an automatic gearbox.  
Temporarily on, accompanied by the  
display of a message.  
One or more minor faults, for which there is/are  
no specific warning lamp(s), have been detected.  
Identify the cause of the fault using the message  
displayed on the instrument panel.  
You may be able to deal with some faults  
yourself, such as changing the battery in the  
remote control.  
For other faults, such as with the tyre under-  
inflation detection system, carry out (3).  
14  
CarManuals2.com  
Dashboard instruments  
on, with increasing frequency as the fuel level  
decreases and approaches zero.  
Refuel without delay to avoid running out of fuel.  
Never drive until completely empty, as  
this could damage the emissions control and  
injection systems.  
Carry out (3) without delay.  
To restart the engine, top up the AdBlue® or carry  
1
out (2).  
Engine self-diagnostics system (Petrol or  
Diesel)  
It is essential to add at least 10 litres of AdBlue®  
to the tank.  
Fixed.  
A minor engine fault has been  
detected.  
Carry out (3).  
AdBlue® (BlueHDi)  
On for around 30 seconds when starting  
the vehicle, accompanied by a message  
indicating the driving range.  
The driving range is between 1,500 and 500  
miles (2,400 and 800 km).  
Top up the AdBlue®.  
SCR emissions control system (BlueHDi)  
Fixed when the ignition is switched  
on, accompanied by an audible  
signal and a message.  
A malfunction of the SCR emissions control  
system has been detected.  
Low traction battery level (Electric)  
Fixed, accompanied by an audible signal.  
The state of charge of the traction battery  
is low.  
View the remaining range.  
Put the vehicle on charge as soon as possible.  
This alert disappears once the exhaust  
emissions return to normal levels.  
Flashing AdBlue® warning lamp on  
switching on the ignition, with the  
Tortoise mode with limited driving range  
(Electric)  
Engine self-diagnostics warning lamp on fixed,  
accompanied by an audible signal and a  
message indicating the driving range.  
Depending on the message displayed, it is  
possible to drive for up to 685 miles (1,100 km)  
before the engine immobiliser is triggered.  
Carry out (3) without delay, to avoid starting  
being prevented.  
Fixed.  
Fixed, on switching on the ignition,  
accompanied by an audible signal and a  
message indicating the driving range.  
The driving range is between 500 and 62 miles  
(800 and 100 km).  
Promptly top up the AdBlue®, or carry out (3).  
Flashing, accompanied by an audible  
signal and a message indicating the  
driving range.  
The driving range is less than 62 miles (100 km).  
You must top up the AdBlue® to avoid engine  
starting being prevented, or carry out (3).  
Flashing, accompanied by an audible  
signal and a message indicating that  
starting is prevented.  
The AdBlue® tank is empty: the legally required  
engine immobiliser system prevents the engine  
from starting.  
The state of charge of the traction battery  
is critical.  
The engine power gradually decreases.  
You must put the vehicle on charge.  
If the warning lamp remains lit, carry out (2).  
Engine self-diagnostic system (Petrol or  
Diesel)  
Flashing AdBlue® warning lamp on  
Flashing.  
switching on the ignition, with the  
The engine management system has a  
Engine self-diagnostics warning lamp on fixed,  
accompanied by an audible signal and a  
message indicating that starting is prevented.  
The engine immobiliser prevents the engine from  
restarting (the permitted driving limit has been  
exceeded after confirmation of a malfunction of  
the emissions control system).  
fault.  
There is a risk that the catalytic converter will be  
destroyed.  
You must carry out (2).  
Fixed.  
The emissions control system has a fault.  
The warning lamp should go off when the engine  
is started.  
To start the engine, carry out (2).  
15  
CarManuals2.com  
Dashboard instruments  
Automatic functions deactivated (electric  
parking brake)  
Fixed, accompanied by the  
message "Parking brake  
Fixed.  
The system has a fault.  
Fixed.  
fault".  
If these warning lamps come on after the engine  
is switched off and then restarted, carry out (3).  
The "automatic application" (on switching  
off the engine) and "automatic release" (on  
acceleration) functions are deactivated.  
If automatic application/release is no longer  
possible:  
► Start the engine.  
► Use the control to apply the electric parking  
brake.  
► Take your foot fully off the brake pedal.  
► Hold the control pressed in the release  
direction for between 10 and 15 seconds.  
► Release the control.  
► Depress and hold the brake pedal.  
► Pull the control in the application direction for  
2 seconds.  
The electric parking brake is faulty: manual and  
automatic functions may not be working.  
When stationary, to immobilise the vehicle:  
► Pull the electric parking brake control and  
hold it for approximately 7 to 15 seconds, until  
the indicator lamp lights up on the instrument  
panel.  
If this procedure does not work, secure the  
vehicle:  
► Park on a level surface.  
Anti-lock braking system (ABS)  
Fixed.  
The anti-lock braking system has a fault.  
The vehicle retains conventional braking.  
Drive carefully at moderate speed, then carry  
out (3).  
Power steering  
Fixed.  
The power steering has a fault.  
Drive carefully at moderate speed, then carry  
out (3).  
► With a manual gearbox, engage a gear.  
► With an automatic gearbox or drive selector,  
select mode P, then place the supplied chock  
against one of the wheels.  
Dynamic stability control (DSC)/Anti-slip  
regulation (ASR)  
Then carry out (2).  
Fixed.  
► Release the control and the brake pedal.  
Collision Risk Alert/Active Safety Brake  
Fixed, accompanied by the display of a  
message.  
The system has been deactivated via the touch  
screen.  
The system is deactivated.  
The DSC/ASR system is reactivated  
automatically when the vehicle is restarted,  
and at speeds above approximately 31 mph  
(50 km/h).  
Malfunction (with electric parking brake)  
Fixed, accompanied by the  
message "Parking brake fault".  
The vehicle cannot be immobilised with the  
engine running.  
If manual application and release commands are  
not working, the electric parking brake control is  
faulty.  
The automatic functions must be used at all  
times and are automatically reactivated in the  
event of a fault with the control.  
Carry out (2).  
Flashing.  
At speeds below 31 mph (50 km/h), it can be  
reactivated manually.  
The system activates and brakes the  
vehicle momentarily to reduce the speed of  
collision with the vehicle in front.  
For more information, refer to the Driving  
section.  
Flashing.  
DSC/ASR system regulation is activated  
in the event of a loss of grip or trajectory.  
Fixed.  
The DSC/ASR system has a fault.  
Carry out (3).  
Fixed, accompanied by a message and  
an audible signal.  
The system has a fault.  
Carry out (3).  
16  
CarManuals2.com  
Dashboard instruments  
Emergency brake malfunction (with  
electric parking brake)  
The system is activated, then corrects the  
trajectory if it detects a risk of unintentionally  
crossing a line or hard shoulder (depending on  
version).  
For more information, refer to the Driving  
section.  
Clean the front camera.  
1
Lane positioning assist  
Fixed, accompanied by the  
Fixed, accompanied by the  
Service warning lamp.  
The system has a fault.  
message "Parking brake fault".  
Emergency braking does not deliver optimal  
performance.  
If automatic release is not available, use manual  
release or carry out (3).  
Carry out (3).  
Fixed.  
Airbags  
The system has been automatically  
deactivated or placed on standby.  
Fixed, accompanied by the display of the  
message "Driving Assistance Sensor  
blind: Clean sensor, see User Manual ".  
The sensor is masked.  
Stop as soon as it is safe to do so and switch off  
the ignition.  
Clean the front camera.  
Fixed.  
Hill start assist  
One of the airbags or seat belt  
Fixed, accompanied by the  
message "Anti roll-back system  
fault".  
The system has a fault.  
Carry out (3).  
pyrotechnic pretensioners is faulty.  
Carry out (3).  
Front passenger airbag (ON)  
Fixed.  
The front passenger airbag is activated.  
The control is set to the "ON" position.  
In this case, do not install a "rearward facing"  
child seat on the front passenger seat - risk  
of serious injury!  
Road signs recognition  
Fixed, accompanied by the display of a  
message and an audible signal.  
The system has a fault.  
Fixed.  
The system has a fault.  
Carry out (3).  
Carry out (3).  
Front passenger airbag (OFF)  
Fixed.  
Driver Attention Warning by Camera  
(Distraction detection)  
Fixed, accompanied by the display of the  
message "Driving Assistance Sensor  
blind: Clean sensor, see User Manual ".  
The sensor is masked.  
Stop as soon as it is safe to do so and switch off  
the ignition.  
The front passenger airbag is deactivated.  
The control is set to the “OFF” position.  
A "rearward facing" child seat can be installed,  
unless there is a fault with the airbags (Airbags  
warning lamp on).  
Fixed.  
The system is deactivated.  
Fixed, accompanied by the display of a  
message and an audible signal.  
The system has a fault.  
Clean the front camera.  
Carry out (3).  
Parking sensors  
Lane keeping assist  
Flashing.  
You are about to cross a broken  
lane marking without operating the direction  
indicators.  
Fixed, accompanied by the display of the  
message "Driving Assistance Sensor  
blind: Clean sensor, see User Manual ".  
The sensor is masked.  
Stop as soon as it is safe to do so and switch off  
the ignition.  
Flashing.  
The system detects an obstacle.  
Fixed, accompanied by the display of a  
message and an audible signal.  
The system has a fault.  
Carry out (3).  
17  
CarManuals2.com  
Dashboard instruments  
Fixed, accompanied by the display of the  
message "Parking Assistance Sensor  
blind: Clean sensor, see User Manual ".  
The sensor is masked.  
Stop as soon as it is safe to do so and switch off  
the ignition.  
Clean the front and/or rear sensors.  
The engine will not switch off at the next traffic  
stop, if the exterior temperature is:  
– below 0°C.  
– above +35°C.  
For more information, refer to the Driving  
section.  
Flashing then fixed, accompanied by a  
message.  
The system has a fault.  
Carry out (3).  
Stop & Start (Petrol or Diesel)  
Fixed.  
When the vehicle stops, the Stop & Start  
system puts the engine into STOP mode.  
Flashing temporarily.  
STOP mode is momentarily unavailable  
or START mode is automatically triggered.  
For more information, refer to the Driving  
section.  
Under-inflation  
Fixed.  
The pressure in one or more tyres is too  
low.  
Check the pressure of the tyres as soon as  
possible.  
Reinitialise the detection system after adjusting  
the pressure.  
Under-inflation warning lamp  
flashing then fixed and Service  
warning lamp fixed.  
The tyre pressure monitoring system is faulty.  
Under-inflation detection is no longer monitored.  
Check the tyre pressures as soon as possible  
and carry out (3).  
Vehicle ready to drive (Electric)  
Fixed, accompanied by an audible signal  
when it comes on.  
The vehicle is ready to drive and the thermal  
comfort systems are available.  
The indicator lamp goes out upon reaching a  
speed of approximately 3 mph (5 km/h) and  
lights up again when the vehicle stops moving.  
The lamp will go out when you switch off the  
motor and exit the vehicle.  
Automatic headlamp dipping  
Fixed, accompanied by an audible signal  
and a message.  
A function or camera malfunction is detected.  
Carry out (2).  
Rear foglamps  
Fixed.  
The lamps are on.  
Green warning/indicator lamps  
Lane positioning assist  
Fixed.  
The function has been activated.  
All conditions have been met: the system is  
operating.  
Hill Assist Descent Control  
Fixed.  
The system has been activated, but the  
conditions for regulation are not met (gradient,  
speed too high, gear engaged).  
Flashing.  
The function is regulating the speed of  
the vehicle.  
The vehicle is being braked; the brake lamps  
come on during the descent.  
Stop & Start (Petrol or Diesel)  
Fixed, accompanied by the display of a  
message.  
The Stop & Start system has been deactivated  
manually.  
For more information, refer to the Driving  
section.  
Automatic wiping  
The engine will not switch off at the next traffic  
stop.  
Fixed.  
Automatic windscreen wiping is activated.  
Fixed.  
Direction indicators  
The Stop & Start system has been  
deactivated automatically.  
Flashing with audible signal.  
The direction indicators are on.  
18  
CarManuals2.com  
Dashboard instruments  
– An alert message indicates the distance  
remaining, as well as the period before the next  
service is due or how long it is overdue.  
Sidelamps  
With the EAT6 automatic gearbox, with the  
engine running, before releasing the parking  
brake, to move out of position P.  
With the EAT8 automatic gearbox or the drive  
selector, it may be necessary to depress the  
brake pedal to unlock the gearbox from mode N.  
This warning lamp will remain on if you attempt  
to release the parking brake without depressing  
the brake pedal.  
1
Fixed.  
The lamps are on.  
Dipped beam headlamps  
Fixed.  
The value indicated is calculated  
according to the distance covered and  
the time elapsed since the last service.  
The alert may also be triggered close to a  
due date.  
In accordance with the vehicle's maintenance  
plan, the service may consist of either:  
– A yearly visit.  
The lamps are on.  
Automatic headlamp dipping  
Fixed.  
The function has been activated  
Automatic gearbox (EAT8) or Drive  
selector (Electric)  
via the touch screen.  
The lighting control stalk ring is in the “AUTO”  
position.  
Fixed.  
– A complete service.  
The automatic gearbox is locked.  
The drive selector is locked.  
You must press the Unlock button to unlock it.  
For more information, refer to the Lighting and  
visibility section.  
Service spanner  
On temporarily when the ignition is  
switched on.  
Blue warning/indicator lamps  
Main beam headlamps  
Fixed.  
Between 1,860 and 620 miles (3,000 and  
1,000 km) or 60 and 21 days remain before the  
next service is due.  
Fixed, when the ignition is switched on.  
The next service is due in less than  
620 miles (1,000 km) or 21 days.  
Have your vehicle serviced very soon.  
Indicators  
The lamps are on.  
Service indicator  
The servicing information is expressed in terms  
of distance (miles or kilometres) and/or time  
(months or days).  
The alert is given at whichever of these two  
terms is reached first.  
The servicing information is displayed in the  
instrument panel. Depending on the version of  
the vehicle:  
– The distance recorder display line indicates  
the distance remaining before the next service  
is due, or the distance travelled since it was due  
preceded by the "-" sign.  
Black/white warning lamps  
Hill Assist Descent Control  
Fixed.  
(grey)  
Service spanner flashing  
The function has been activated, but is currently  
paused because the speed is too high.  
Reduce the vehicle speed to below 19 mph  
(30 km/h).  
Flashing then fixed, when the  
ignition is switched on.  
(With BlueHDi Diesel engines, associated with  
the Service warning lamp.)  
The servicing interval has been exceeded.  
Have your vehicle serviced as soon as possible.  
Foot on the brake  
Fixed.  
Insufficient or no pressure on the brake  
pedal.  
19  
CarManuals2.com  
Dashboard instruments  
Resetting the service indicator  
The service indicator must be reset after each  
service.  
If you have serviced your vehicle yourself:  
► Switch the ignition off.  
Reminder of the servicing information  
If a low oil level is confirmed by a check using  
the dipstick, the level must be topped up to avoid  
damage to the engine.  
For more information on Checking levels, refer  
to the corresponding section.  
With Touch screen 10" & Bluetooth Radio  
& Telephone  
Servicing information is accessible by  
pressing the "Check" button in the  
Driving touch screen menu.  
Oil gauge malfunction  
This is indicated by the display of "OIL_ _"  
or by the message "Oil level measurement  
invalid" (depending on the instrument panel),  
accompanied by the lighting of the Service  
warning lamp and an audible signal.  
Consult a PEUGEOT dealer or a qualified  
workshop.  
With PEUGEOT i-Connect Advanced -  
PEUGEOT i-Connect  
Servicing information is accessible using  
the Settings > Vehicle application on the  
touch screen.  
► Then select Safety > Diagnostics.  
In the event of a malfunction of the  
electric gauge, the oil level is no longer  
monitored.  
If the system is faulty, you must check the  
engine oil level using the manual dipstick  
located in the engine compartment.  
For more information on Checking levels,  
refer to the corresponding section.  
Engine oil level indicator  
► Press and hold the button located on the end  
of the lighting control stalk.  
(Depending on version)  
► Without pressing the brake pedal, press the  
START/STOP button once; a temporary display  
window appears and a countdown begins.  
► When the display indicates =0, release the  
lighting control stalk button; the spanner symbol  
disappears.  
On versions fitted with an electric gauge, the  
engine oil level status is displayed on the  
instrument panel for a few seconds when  
the ignition is switched on, after the servicing  
information.  
The level read will only be correct if the  
vehicle is on level ground and the engine  
has been off for more than 30 minutes.  
If you disconnect the battery following  
this operation, lock the vehicle and wait  
at least 5 minutes for the reset to be  
registered.  
Low oil level  
This is indicated by the display of "OIL" or by  
the message "Oil level incorrect" (depending  
on the instrument panel), accompanied by the  
lighting of the Service warning lamp and an  
audible signal.  
20  
CarManuals2.com  
Dashboard instruments  
With Touch screen 10" & Bluetooth Radio  
& Telephone  
Coolant temperature  
indicator  
AdBlue® range indicators  
(BlueHDi)  
The Diesel BlueHDi engines are equipped with  
a system that associates the SCR (Selective  
Catalytic Reduction) emissions control system  
and the Diesel particle filter (DPF) for the  
treatment of exhaust gases. They cannot  
function without AdBlue® fluid.  
When the level of AdBlue® falls below the  
reserve level (between 1,500 and 0 miles (2,400  
and 0 km)), a warning lamp lights up when  
the ignition is switched on and an estimate  
of the distance that can be travelled before  
engine starting is prevented is displayed in the  
instrument panel.  
1
Driving range information is accessible by  
pressing the "Check" button in the  
Driving touch screen menu.  
With PEUGEOT i-Connect Advanced -  
PEUGEOT i-Connect  
Driving range information is accessible  
using the Settings > Vehicle application  
on the touch screen.  
► Then select Safety > Diagnostics.  
With the engine running:  
Actions required related to a lack of  
AdBlue®  
– In zone A, the temperature is correct.  
– In zone B, the temperature is too high. The  
associated warning lamp and the STOP warning  
lamp light up in red on the instrument panel,  
accompanied by the display of a message and  
an audible signal.  
You must stop the vehicle as soon as it is  
safe to do so.  
Wait a few minutes before switching off the  
engine.  
The following warning lamps light up when the  
quantity of AdBlue® is below the reserve level:  
driving range of 1,500 miles (2,400 km).  
Together with the warning lamps, messages  
regularly remind you of the need to top up to  
avoid engine starting being prevented. Refer to  
the Warning and indicator lamps section for  
details of the messages displayed.  
The engine starting prevention system  
required by regulations is activated  
automatically once the AdBlue® tank is empty.  
It is then no longer possible to start the  
engine until the minimum level of AdBlue® has  
been topped up.  
For more information on AdBlue®  
(BlueHDi) and in particular on topping  
up, refer to the corresponding section.  
After switching off the ignition, carefully  
open the bonnet and check the coolant  
level.  
Manual display of driving range  
(With matrix instrument panel and digital  
instrument panel)  
While the driving range is greater than  
1,500 miles (2,400 km), it is not displayed  
automatically.  
For more information on Checking  
levels, refer to the corresponding  
section.  
21  
CarManuals2.com  
Dashboard instruments  
minutes of driving before the top-up detection  
is effective.  
The AdBlue warning lamp flashes and a  
message is displayed ("Emissions control  
fault: starting prevented in X miles (kms)" or  
"NO START IN X miles (kms)"), indicating the  
driving range in miles or kilometres.  
While driving, the message is displayed every 30  
seconds. The alert is repeated when switching  
on the ignition.  
Warning/  
indicator  
lamps on  
Action  
Remaining  
range  
Malfunction of the SCR emissions  
control system  
Top up.  
Between  
1,500  
miles and  
500 miles  
(2,400 km  
and 800 km)  
Malfunction detection  
If a malfunction is detected,  
these warning lamps come  
on, accompanied by an  
audible signal and the display  
of an "Emissions control  
fault" or "NO START IN"  
message.  
You can continue driving for up to 685 miles  
(1,100 km) before the engine starting  
prevention system is triggered.  
Top up as  
soon as  
possible.  
Between  
500 miles  
and 62  
miles  
(800 km and  
100 km)  
Have it checked by a PEUGEOT dealer  
or a qualified workshop.  
Starting prevented  
The alert is triggered while driving when the  
fault is detected for the first time, and thereafter  
when switching on the ignition for subsequent  
journeys, for as long as the cause of the fault  
persists.  
Every time the ignition is switched on, the  
message "Emissions control fault: Starting  
prevented" or "NO START IN" is displayed.  
A top-up is  
vital, there is  
a risk that the  
engine will  
be prevented  
from starting.  
Between  
62 miles  
and 0 miles  
(100 km and  
0 km)  
To restart the engine  
Contact a PEUGEOT dealer or a  
qualified workshop.  
If the fault is temporary, the alert  
disappears during the next journey, after  
self-diagnostic checks of the SCR emissions  
control system.  
To be able  
0 miles (km)  
Power indicator (Electric)  
The power indicator shows in real time the power  
demanded from the vehicle.  
to restart the  
engine, add at  
least 10 litres  
of AdBlue® to  
the tank.  
Malfunction confirmed during the  
permitted driving phase (between 685  
miles and 0 miles (1,100 km and 0 km))  
If the fault indication is still displayed  
permanently after 31 miles (50 km) of driving, the  
fault in the SCR system is confirmed.  
Taking into account of top-up  
Top-up detection may not be  
instantaneous after addition. It may take a few  
22  
CarManuals2.com  
Dashboard instruments  
For electric versions  
The state of charge of the traction battery  
is critical.  
Fixed, together with the reserve warning lamp,  
accompanied by an audible signal.  
► You must put the vehicle on charge.  
Charge level indicator  
(Electric)  
1
The remaining range is no longer  
calculated. The drive train power  
gradually decreases.  
The heating and air conditioning are switched  
off (even if the needle or cursor indicating  
their consumption is not at the "ECO"  
position).  
CHARGE Traction battery charging during  
deceleration and braking.  
The traction battery's actual charge level and  
the remaining range are displayed continuously  
when the vehicle is started.  
ECO  
Moderate energy consumption and  
optimised driving range.  
Thermal comfort  
consumption indicator  
(Electric)  
(Depending on version)  
POWER Energy consumption by the drive train  
With the ignition off, opening the driver's  
door activates the indicator.  
during acceleration.  
NEUTRAL  
When the ignition is switched on, the vehicle’s  
electric drive train neither consumes nor  
generates energy; after sweeping over the  
indicator, the needle or the cursor returns to its  
"neutral" position: between ECO and CHARGE.  
Associated warning lamps  
Two successive alert levels indicate that the  
energy available has dropped to a low level:  
1st level: Reserve  
The state of charge of the traction battery  
is low.  
Fixed and indicator in the red zone,  
accompanied by an audible signal.  
► View the remaining range on the instrument  
panel.  
With the ignition off, opening the driver's  
door activates the indicator, which moves  
to the "neutral" position: between ECO and  
CHARGE.  
The gauge shows the consumption of the  
traction battery's electrical energy by the thermal  
comfort devices in the passenger compartment.  
With a digital instrument panel, the gauge only  
appears in "Personal" mode.  
► Put the vehicle on charge as soon as  
possible.  
2nd level: Critical  
23  
CarManuals2.com  
Dashboard instruments  
The devices in question are the heating and air  
conditioning systems.  
This equipment can be used:  
– If the vehicle is not plugged in, when the  
READY lamp is lit.  
– If the vehicle is plugged in, when the ignition is  
switched on ("Lounge" mode).  
Selecting ECO mode limits the performance of  
some of this equipment. The needle or cursor on  
the thermal comfort consumption indicator then  
moves into the "ECO" zone.  
With the ignition on, the total distance is  
displayed at all times. It remains displayed for  
30 seconds after switching off the ignition. It is  
displayed when the driver's door is opened, and  
when the vehicle is locked or unlocked.  
Manual test  
This function allows you to check certain  
indicators and display the alerts log.  
With Touch screen 10" & Bluetooth Radio  
& Telephone  
When travelling abroad, you may have to  
change the distance units (miles or km):  
the displayed speed must be in the local  
country’s official unit (mph or km/h).  
The unit is changed via the screen's  
configuration menu, with the vehicle  
stationary.  
It can be accessed via the "Check" button  
in the Driving touch screen menu.  
With PEUGEOT i-Connect Advanced -  
PEUGEOT i-Connect  
It can be accessed via the Settings>  
Vehicle touch screen application.  
► Select Safety > Diagnostics.  
The following information is displayed on the  
instrument panel:  
– Tyre pressures.  
– Engine oil level (depending on engine).  
– Next service due.  
To quickly heat or cool the passenger  
compartment, feel free to temporarily  
select the maximum heating or cooling  
setting.  
When the heating is on maximum, the gauge  
on the thermal comfort consumption indicator  
is in the MAX zone. When the air conditioning  
is on maximum, it stays in the ECO zone.  
Excessive use of thermal comfort equipment,  
particularly at low speed, can significantly  
decrease the vehicle's range.  
Remember to optimise equipment settings  
upon achieving the desired level of comfort,  
and adjust them if necessary whenever you  
start the vehicle.  
After an extended period without using the  
heating, you may notice a slight odour during  
the first few minutes of use.  
Lighting dimmer  
This system allows the brightness of the  
instruments and controls to be adjusted manually  
to suit the ambient light level.  
– Driving range associated with the AdBlue® and  
the SCR system (BlueHDi Diesel).  
– Current alerts.  
With Touch screen 10"  
& Bluetooth Radio &  
Telephone  
This information is also displayed  
automatically every time the ignition is  
switched on.  
► Press Settings from the status bar or  
from the menus buttons.  
/
► Select "Brightness" or  
"Screen configuration",  
Total distance recorder  
The total distance recorder measures the total  
distance travelled by the vehicle since its initial  
registration.  
depending on equipment.  
► Adjust the instrument panel and  
screen brightness by using the arrows or  
moving the slider.  
24  
CarManuals2.com  
Dashboard instruments  
/
► Press this button to save and  
exit, depending on equipment.  
In all other display modes, pressing the end of  
the wiper control stalk will cause this data to  
appear temporarily in a specific window.  
Display of the various tabs  
Definitions  
1
You can also switch off the screen:  
► Press Settings from the status bar or  
from the menus buttons.  
► Select "Turn off screen" or "Dark",  
depending on equipment.  
The screen goes off completely.  
► Press the screen again (anywhere on its  
surface) to turn it on.  
Range  
(miles or km)  
(Traction battery charge level percentage)  
(Electric)  
Distance that can still be travelled with the  
fuel remaining in the tank (based on the  
average fuel consumption over the last few miles  
(kilometres) travelled).  
This value may vary following a change in driving  
style or terrain, leading to a significant change in  
current fuel consumption.  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the range  
is recalculated and is displayed if it exceeds 62  
miles (100 km).  
Dashes appearing permanently in place of  
numbers while driving indicates a malfunction.  
Consult a PEUGEOT dealer or a qualified  
workshop.  
With PEUGEOT i-Connect  
Advanced - PEUGEOT  
i-Connect  
It is configured in the Settings >  
Brightness touch screen application.  
► In the "Cockpit" category, press or move the  
slider to the desired setting.  
► Pressing the button located on the end of the  
wiper control stalk displays the following tabs in  
turn:  
– Current information:  
• Driving range (Petrol or Diesel).  
• Current fuel consumption.  
• Stop & Start time counter (Petrol or Diesel).  
– Trips "1" then "2":  
• Average speed.  
• Average fuel consumption.  
• Distance travelled.  
Trip computer  
Displays information related to the current trip  
(range, fuel consumption, average speed, etc.).  
Current consumption  
(mpg or l/100 km or km/l)  
(miles/kWh or kWh/100 km or km/kWh) (Electric)  
Data displayed on the  
instrument panel  
With instrument panels with dials  
Pressing the end of the wiper control stalk  
displays the trip computer data.  
Trip reset  
► When the desired trip is displayed,  
press the button on the end of the wiper  
control stalk for more than 2 seconds.  
Trips "1" and "2" are independent and are used  
in the same way.  
/
Calculated during the last few  
seconds.  
This function is only displayed at speeds above  
19 mph (30 km/h) (Petrol or Diesel).  
With digital instrument panel  
Trip computer data is permanently displayed  
when the "Personal" display mode is selected.  
25  
CarManuals2.com  
Dashboard instruments  
Average consumption  
(mpg or l/100 km or km/l)  
(miles/kWh or kWh/100 km or km/kWh) (Electric)  
– Vehicle functions and equipment setting  
menus.  
With Touch screen 10"  
& Bluetooth Radio &  
Telephone  
– Audio system and telephone controls and  
display of related information.  
– Display of visual manoeuvring aid functions  
(visual parking sensor information, etc.).  
– Internet services and display of related  
information.  
/
Calculated since the last trip  
computer reset.  
Principles  
Average speed  
(mph or km/h)  
Access to the menus  
– Navigation system controls and  
display of related information (depending on  
version).  
Calculated since the last trip computer  
reset.  
Direct access to the Climate menu  
Direct access to the Driving menu  
Distance travelled  
(miles or km)  
For safety reasons, always stop the  
vehicle before performing operations  
that require sustained attention.  
Some functions are not accessible while  
driving.  
► Use the buttons arranged below the touch  
screen to access the menus, then press the  
buttons that appear on the touch screen.  
Some menus may display across two pages:  
press the "OPTIONS" button to access the  
second page.  
Calculated since the last trip computer  
reset.  
Stop & Start time counter  
(minutes/seconds or hours/minutes)  
Recommendations  
This screen uses capacitive sensing technology.  
– Do not use pointed objects on the touch  
screen.  
After a few moments with no action on  
the second page, the first page is  
displayed automatically.  
If your vehicle is fitted with the Stop & Start  
function, a time counter calculates the time spent  
in STOP mode during a journey.  
The time counter is reset each time the ignition is  
switched on.  
– Do not touch the touch screen with wet hands.  
– Use a soft, clean cloth to clean the touch  
screen.  
To deactivate/activate a function, select "OFF"  
or "ON".  
Configuring a function  
Touch screen  
This system gives access to the following  
elements:  
Access to additional information on the  
function  
Confirm  
– Permanent display of the time and outside  
temperature (a blue warning lamp appears if  
there is a risk of ice).  
Return to the previous page or confirm  
– Heating/air conditioning system controls.  
26  
CarManuals2.com  
Dashboard instruments  
Volume adjustment/mute  
Access additional information on the  
function  
Access to function parameters  
With PEUGEOT i-Connect  
Advanced - PEUGEOT  
i-Connect  
1
Menus  
Adding/Removing shortcuts  
Press the touch screen with three fingers  
to show all of the menu buttons.  
Main controls  
Short press, ignition off: system on/off.  
Short press, ignition on: mute/restore  
Access to one of the home pages  
Return to the first home page  
Direct access to the Climate application  
For more information about the menus,  
refer to the sections describing the audio  
and telematics systems.  
sound.  
Long press, ignition on: start standby mode  
(mute sound, screens and clock display off).  
Rotation: volume adjustment.  
Direct access to the Shortcuts for  
driving aids  
Radio/Media  
► Swipe down from the upper edge of the touch  
screen to access a list of quick settings (e.g.  
Brightness, Diagnostics).  
► Depending on the pages displayed on the  
screen, with or without the context menu, scroll  
the text by swiping with your finger, as with a  
smartphone.  
Applications  
Climate  
Press this button to access the  
applications wall.  
To obtain information about the other  
applications not listed here, refer to the sections  
describing the audio and telematic systems.  
ADAS  
Settings for temperature, air flow, etc.  
For more information on Automatic air  
conditioning, refer to the corresponding section.  
Navigation via CarPlay® or Android Auto  
(Depending on equipment)  
Driving  
From any page, press the touch screen  
with three fingers to display the  
applications wall.  
Activation/Deactivation and configuration  
of the driving aid functions.  
Activation, deactivation and settings for  
certain functions.  
The functions are organised in 2 tabs: "Driving  
functions" and "Vehicle settings".  
Telephone  
Climate  
Settings for temperature, air flow, etc.  
For more information on Automatic air  
conditioning, refer to the corresponding section.  
Settings  
Show/Hide context menu  
Return to the previous page  
Applications  
Main settings for the audio system, touch  
screen and digital instrument panel.  
Activation/Deactivation and configuration of  
the exterior lighting, vehicle access and safety  
functions.  
Access to certain configurable equipment.  
► To change the status of a function, press the  
description for the corresponding line (change  
confirmed by the slider moving to the right/left:  
function activated/deactivated).  
27  
CarManuals2.com  
Dashboard instruments  
Energy  
Remotely operable  
additional functions  
(Electric)  
Access to the charging system features  
(energy flow, consumption statistics, deferred  
charging).  
(Depending on country of sale)  
Energy application  
Flow  
– Blue graph: energy consumed directly from  
the traction battery.  
– Green graph: energy regenerated during  
deceleration and braking phases used to  
recharge the traction battery.  
The following functions are  
available from the MYPEUGEOT  
APP application, which is  
The page displays a real-time representation of  
the electric drive train’s operation.  
accessible from a smartphone:  
The average result for the current trip is stated in  
kWh/100 km.  
– Managing the traction battery charging  
(deferred charging).  
– Managing the temperature pre-conditioning.  
– Viewing statistics (depending on availability).  
– Viewing the state of charge and range of the  
vehicle.  
Charging  
This page allows you to programme deferred  
charging.  
For more information on Charging the traction  
battery (Electric), refer to the corresponding  
section.  
1. Active driving mode  
2. Electric motor  
3. Estimated traction battery charge level  
4. Energy flows  
Installation procedure  
► Download the MYPEUGEOT APP application  
from the appropriate online store for your  
smartphone.  
The energy flows have a specific colour for each  
type of driving:  
► Create an account.  
► Enter the vehicle identification number  
(available on the vehicle registration certificate).  
For more information on Identification  
markings, refer to the corresponding section.  
A. Blue: energy consumption  
B. Green: energy recovery  
Statistics  
Network coverage  
In order to be able to use the various  
remotely operable features, ensure that your  
This page shows electrical energy consumption  
statistics.  
28  
CarManuals2.com  
Dashboard instruments  
vehicle is located in an area covered by the  
mobile network.  
1
A lack of network coverage may prevent  
communication with the vehicle (for example,  
if it is in an underground car park). In such  
cases, the application will display a message  
indicating that the connection with the vehicle  
could not be established.  
29  
CarManuals2.com  

Related Topics

Warning and indicator lamps
Indicators
Manual test
Total distance recorder
Lighting dimmer
Remotely operable additional functions (Electric)