Get Dashboard instruments -> Indicators Guide for Peugeot 3008 SUV Third Generation (2024-2025)

Dashboard instruments

– An alert message indicates the distance

remaining, as well as the period before the next

service is due or how long it is overdue.

Sidelamps

With the EAT6 automatic gearbox, with the

engine running, before releasing the parking

brake, to move out of position P.

With the EAT8 automatic gearbox or the drive

selector, it may be necessary to depress the

brake pedal to unlock the gearbox from mode N.

This warning lamp will remain on if you attempt

to release the parking brake without depressing

the brake pedal.

1

Fixed.

The lamps are on.

Dipped beam headlamps

Fixed.

The value indicated is calculated

according to the distance covered and

the time elapsed since the last service.

The alert may also be triggered close to a

due date.

In accordance with the vehicle's maintenance

plan, the service may consist of either:

– A yearly visit.

The lamps are on.

Automatic headlamp dipping

Fixed.

The function has been activated

Automatic gearbox (EAT8) or Drive

selector (Electric)

via the touch screen.

The lighting control stalk ring is in the “AUTO”

position.

Fixed.

– A complete service.

The automatic gearbox is locked.

The drive selector is locked.

You must press the Unlock button to unlock it.

For more information, refer to the Lighting and

visibility section.

Service spanner

On temporarily when the ignition is

switched on.

Blue warning/indicator lamps

Main beam headlamps

Fixed.

Between 1,860 and 620 miles (3,000 and

1,000 km) or 60 and 21 days remain before the

next service is due.

Fixed, when the ignition is switched on.

The next service is due in less than

620 miles (1,000 km) or 21 days.

Have your vehicle serviced very soon.

Indicators

The lamps are on.

Service indicator

The servicing information is expressed in terms

of distance (miles or kilometres) and/or time

(months or days).

The alert is given at whichever of these two

terms is reached ﬁrst.

The servicing information is displayed in the

instrument panel. Depending on the version of

the vehicle:

– The distance recorder display line indicates

the distance remaining before the next service

is due, or the distance travelled since it was due

preceded by the "-" sign.

Black/white warning lamps

Hill Assist Descent Control

Fixed.

(grey)

Service spanner ﬂashing

The function has been activated, but is currently

paused because the speed is too high.

Reduce the vehicle speed to below 19 mph

(30 km/h).

Flashing then ﬁxed, when the

ignition is switched on.

(With BlueHDi Diesel engines, associated with

the Service warning lamp.)

The servicing interval has been exceeded.

Have your vehicle serviced as soon as possible.

Foot on the brake

Fixed.

Insuﬃcient or no pressure on the brake

pedal.

19

CarManuals2.com

Dashboard instruments

Resetting the service indicator

The service indicator must be reset after each

service.

If you have serviced your vehicle yourself:

► Switch the ignition oﬀ.

Reminder of the servicing information

If a low oil level is conﬁrmed by a check using

the dipstick, the level must be topped up to avoid

damage to the engine.

For more information on Checking levels, refer

to the corresponding section.

With Touch screen 10" & Bluetooth Radio

& Telephone

Servicing information is accessible by

pressing the "Check" button in the

Driving touch screen menu.

Oil gauge malfunction

This is indicated by the display of "OIL_ _"

or by the message "Oil level measurement

invalid" (depending on the instrument panel),

accompanied by the lighting of the Service

warning lamp and an audible signal.

Consult a PEUGEOT dealer or a qualiﬁed

workshop.

With PEUGEOT i-Connect Advanced -

PEUGEOT i-Connect

Servicing information is accessible using

the Settings > Vehicle application on the

touch screen.

► Then select Safety > Diagnostics.

In the event of a malfunction of the

electric gauge, the oil level is no longer

monitored.

If the system is faulty, you must check the

engine oil level using the manual dipstick

located in the engine compartment.

For more information on Checking levels,

refer to the corresponding section.

Engine oil level indicator

► Press and hold the button located on the end

of the lighting control stalk.

(Depending on version)

► Without pressing the brake pedal, press the

START/STOP button once; a temporary display

window appears and a countdown begins.

► When the display indicates =0, release the

lighting control stalk button; the spanner symbol

disappears.

On versions ﬁtted with an electric gauge, the

engine oil level status is displayed on the

instrument panel for a few seconds when

the ignition is switched on, after the servicing

information.

The level read will only be correct if the

vehicle is on level ground and the engine

has been oﬀ for more than 30 minutes.

If you disconnect the battery following

this operation, lock the vehicle and wait

at least 5 minutes for the reset to be

registered.

Low oil level

This is indicated by the display of "OIL" or by

the message "Oil level incorrect" (depending

on the instrument panel), accompanied by the

lighting of the Service warning lamp and an

audible signal.

20

CarManuals2.com

Dashboard instruments

With Touch screen 10" & Bluetooth Radio

& Telephone

Coolant temperature

indicator

AdBlue^®range indicators

(BlueHDi)

The Diesel BlueHDi engines are equipped with

a system that associates the SCR (Selective

Catalytic Reduction) emissions control system

and the Diesel particle ﬁlter (DPF) for the

treatment of exhaust gases. They cannot

function without AdBlue^®ﬂuid.

When the level of AdBlue^®falls below the

reserve level (between 1,500 and 0 miles (2,400

and 0 km)), a warning lamp lights up when

the ignition is switched on and an estimate

of the distance that can be travelled before

engine starting is prevented is displayed in the

instrument panel.

1

Driving range information is accessible by

pressing the "Check" button in the

Driving touch screen menu.

With PEUGEOT i-Connect Advanced -

PEUGEOT i-Connect

Driving range information is accessible

using the Settings > Vehicle application

on the touch screen.

► Then select Safety > Diagnostics.

With the engine running:

Actions required related to a lack of

AdBlue^®

– In zone A, the temperature is correct.

– In zone B, the temperature is too high. The

associated warning lamp and the STOP warning

lamp light up in red on the instrument panel,

accompanied by the display of a message and

an audible signal.

You must stop the vehicle as soon as it is

safe to do so.

Wait a few minutes before switching oﬀ the

engine.

The following warning lamps light up when the

quantity of AdBlue^®is below the reserve level:

driving range of 1,500 miles (2,400 km).

Together with the warning lamps, messages

regularly remind you of the need to top up to

avoid engine starting being prevented. Refer to

the Warning and indicator lamps section for

details of the messages displayed.

The engine starting prevention system

required by regulations is activated

automatically once the AdBlue^®tank is empty.

It is then no longer possible to start the

engine until the minimum level of AdBlue^®has

been topped up.

For more information on AdBlue^®

(BlueHDi) and in particular on topping

up, refer to the corresponding section.

After switching oﬀ the ignition, carefully

open the bonnet and check the coolant

level.

Manual display of driving range

(With matrix instrument panel and digital

instrument panel)

While the driving range is greater than

1,500 miles (2,400 km), it is not displayed

automatically.

For more information on Checking

levels, refer to the corresponding

section.

21

CarManuals2.com

Dashboard instruments

minutes of driving before the top-up detection

is eﬀective.

The AdBlue warning lamp ﬂashes and a

message is displayed ("Emissions control

fault: starting prevented in X miles (kms)" or

"NO START IN X miles (kms)"), indicating the

driving range in miles or kilometres.

While driving, the message is displayed every 30

seconds. The alert is repeated when switching

on the ignition.

Warning/

indicator

lamps on

Action

Remaining

range

Malfunction of the SCR emissions

control system

Top up.

Between

1,500

miles and

500 miles

(2,400 km

and 800 km)

Malfunction detection

If a malfunction is detected,

these warning lamps come

on, accompanied by an

audible signal and the display

of an "Emissions control

fault" or "NO START IN"

message.

You can continue driving for up to 685 miles

(1,100 km) before the engine starting

prevention system is triggered.

Top up as

soon as

possible.

Between

500 miles

and 62

miles

(800 km and

100 km)

Have it checked by a PEUGEOT dealer

or a qualiﬁed workshop.

Starting prevented

The alert is triggered while driving when the

fault is detected for the ﬁrst time, and thereafter

when switching on the ignition for subsequent

journeys, for as long as the cause of the fault

persists.

Every time the ignition is switched on, the

message "Emissions control fault: Starting

prevented" or "NO START IN" is displayed.

A top-up is

vital, there is

a risk that the

engine will

be prevented

from starting.

Between

62 miles

and 0 miles

(100 km and

0 km)

To restart the engine

Contact a PEUGEOT dealer or a

qualiﬁed workshop.

If the fault is temporary, the alert

disappears during the next journey, after

self-diagnostic checks of the SCR emissions

control system.

To be able

0 miles (km)

Power indicator (Electric)

The power indicator shows in real time the power

demanded from the vehicle.

to restart the

engine, add at

least 10 litres

of AdBlue^®to

the tank.

Malfunction conﬁrmed during the

permitted driving phase (between 685

miles and 0 miles (1,100 km and 0 km))

If the fault indication is still displayed

permanently after 31 miles (50 km) of driving, the

fault in the SCR system is conﬁrmed.

Taking into account of top-up

Top-up detection may not be

instantaneous after addition. It may take a few

22

CarManuals2.com

Dashboard instruments

For electric versions

The state of charge of the traction battery

is critical.

Fixed, together with the reserve warning lamp,

accompanied by an audible signal.

► You must put the vehicle on charge.

Charge level indicator

(Electric)

1

The remaining range is no longer

calculated. The drive train power

gradually decreases.

The heating and air conditioning are switched

oﬀ (even if the needle or cursor indicating

their consumption is not at the "ECO"

position).

CHARGE Traction battery charging during

deceleration and braking.

The traction battery's actual charge level and

the remaining range are displayed continuously

when the vehicle is started.

ECO

Moderate energy consumption and

optimised driving range.

Thermal comfort

consumption indicator

(Electric)

(Depending on version)

POWER Energy consumption by the drive train

With the ignition oﬀ, opening the driver's

door activates the indicator.

during acceleration.

NEUTRAL

When the ignition is switched on, the vehicle’s

electric drive train neither consumes nor

generates energy; after sweeping over the

indicator, the needle or the cursor returns to its

"neutral" position: between ECO and CHARGE.

Associated warning lamps

Two successive alert levels indicate that the

energy available has dropped to a low level:

1st level: Reserve

The state of charge of the traction battery

is low.

Fixed and indicator in the red zone,

accompanied by an audible signal.

► View the remaining range on the instrument

panel.

With the ignition oﬀ, opening the driver's

door activates the indicator, which moves

to the "neutral" position: between ECO and

CHARGE.

The gauge shows the consumption of the

traction battery's electrical energy by the thermal

comfort devices in the passenger compartment.

With a digital instrument panel, the gauge only

appears in "Personal" mode.

► Put the vehicle on charge as soon as

possible.

2nd level: Critical

23

CarManuals2.com

Dashboard instruments

The devices in question are the heating and air

conditioning systems.

This equipment can be used:

– If the vehicle is not plugged in, when the

READY lamp is lit.

– If the vehicle is plugged in, when the ignition is

switched on ("Lounge" mode).

Selecting ECO mode limits the performance of

some of this equipment. The needle or cursor on

the thermal comfort consumption indicator then

moves into the "ECO" zone.

With the ignition on, the total distance is

displayed at all times. It remains displayed for

30 seconds after switching oﬀ the ignition. It is

displayed when the driver's door is opened, and

when the vehicle is locked or unlocked.

Manual test

This function allows you to check certain

indicators and display the alerts log.

With Touch screen 10" & Bluetooth Radio

& Telephone

When travelling abroad, you may have to

change the distance units (miles or km):

the displayed speed must be in the local

country’s oﬃcial unit (mph or km/h).

The unit is changed via the screen's

conﬁguration menu, with the vehicle

stationary.

It can be accessed via the "Check" button

in the Driving touch screen menu.

With PEUGEOT i-Connect Advanced -

PEUGEOT i-Connect

It can be accessed via the Settings>

Vehicle touch screen application.

► Select Safety > Diagnostics.

The following information is displayed on the

instrument panel:

– Tyre pressures.

– Engine oil level (depending on engine).

– Next service due.

To quickly heat or cool the passenger

compartment, feel free to temporarily

select the maximum heating or cooling

setting.

When the heating is on maximum, the gauge

on the thermal comfort consumption indicator

is in the MAX zone. When the air conditioning

is on maximum, it stays in the ECO zone.

Excessive use of thermal comfort equipment,

particularly at low speed, can signiﬁcantly

decrease the vehicle's range.

Remember to optimise equipment settings

upon achieving the desired level of comfort,

and adjust them if necessary whenever you

start the vehicle.

After an extended period without using the

heating, you may notice a slight odour during

the ﬁrst few minutes of use.

Lighting dimmer

This system allows the brightness of the

instruments and controls to be adjusted manually

to suit the ambient light level.

– Driving range associated with the AdBlue^®and

the SCR system (BlueHDi Diesel).

– Current alerts.

With Touch screen 10"

& Bluetooth Radio &

Telephone

This information is also displayed

automatically every time the ignition is

switched on.

► Press Settings from the status bar or

from the menus buttons.

/

► Select "Brightness" or

"Screen conﬁguration",

Total distance recorder

The total distance recorder measures the total

distance travelled by the vehicle since its initial

registration.

depending on equipment.

► Adjust the instrument panel and

screen brightness by using the arrows or

moving the slider.

24

CarManuals2.com

Dashboard instruments -> Indicators for Your Peugeot 3008 SUV Third Generation (2024-2025)

Related Topics

Dashboard instruments