2024-2025 Peugeot 3008 SUV Dashboard instruments -> Lighting dimmer User Manual

MY CAR USER MANUAL

Dashboard instruments -> Lighting dimmer for Your Peugeot 3008 SUV Third Generation (2024-2025)

Dashboard instruments  
The devices in question are the heating and air  
conditioning systems.  
This equipment can be used:  
– If the vehicle is not plugged in, when the  
READY lamp is lit.  
– If the vehicle is plugged in, when the ignition is  
switched on ("Lounge" mode).  
Selecting ECO mode limits the performance of  
some of this equipment. The needle or cursor on  
the thermal comfort consumption indicator then  
moves into the "ECO" zone.  
With the ignition on, the total distance is  
displayed at all times. It remains displayed for  
30 seconds after switching off the ignition. It is  
displayed when the driver's door is opened, and  
when the vehicle is locked or unlocked.  
Manual test  
This function allows you to check certain  
indicators and display the alerts log.  
With Touch screen 10" & Bluetooth Radio  
& Telephone  
When travelling abroad, you may have to  
change the distance units (miles or km):  
the displayed speed must be in the local  
country’s official unit (mph or km/h).  
The unit is changed via the screen's  
configuration menu, with the vehicle  
stationary.  
It can be accessed via the "Check" button  
in the Driving touch screen menu.  
With PEUGEOT i-Connect Advanced -  
PEUGEOT i-Connect  
It can be accessed via the Settings>  
Vehicle touch screen application.  
► Select Safety > Diagnostics.  
The following information is displayed on the  
instrument panel:  
– Tyre pressures.  
– Engine oil level (depending on engine).  
– Next service due.  
To quickly heat or cool the passenger  
compartment, feel free to temporarily  
select the maximum heating or cooling  
setting.  
When the heating is on maximum, the gauge  
on the thermal comfort consumption indicator  
is in the MAX zone. When the air conditioning  
is on maximum, it stays in the ECO zone.  
Excessive use of thermal comfort equipment,  
particularly at low speed, can significantly  
decrease the vehicle's range.  
Remember to optimise equipment settings  
upon achieving the desired level of comfort,  
and adjust them if necessary whenever you  
start the vehicle.  
After an extended period without using the  
heating, you may notice a slight odour during  
the first few minutes of use.  
Lighting dimmer  
This system allows the brightness of the  
instruments and controls to be adjusted manually  
to suit the ambient light level.  
– Driving range associated with the AdBlue® and  
the SCR system (BlueHDi Diesel).  
– Current alerts.  
With Touch screen 10"  
& Bluetooth Radio &  
Telephone  
This information is also displayed  
automatically every time the ignition is  
switched on.  
► Press Settings from the status bar or  
from the menus buttons.  
/
► Select "Brightness" or  
"Screen configuration",  
Total distance recorder  
The total distance recorder measures the total  
distance travelled by the vehicle since its initial  
registration.  
depending on equipment.  
► Adjust the instrument panel and  
screen brightness by using the arrows or  
moving the slider.  
24  
CarManuals2.com  
Dashboard instruments  
/
► Press this button to save and  
exit, depending on equipment.  
In all other display modes, pressing the end of  
the wiper control stalk will cause this data to  
appear temporarily in a specific window.  
Display of the various tabs  
Definitions  
1
You can also switch off the screen:  
► Press Settings from the status bar or  
from the menus buttons.  
► Select "Turn off screen" or "Dark",  
depending on equipment.  
The screen goes off completely.  
► Press the screen again (anywhere on its  
surface) to turn it on.  
Range  
(miles or km)  
(Traction battery charge level percentage)  
(Electric)  
Distance that can still be travelled with the  
fuel remaining in the tank (based on the  
average fuel consumption over the last few miles  
(kilometres) travelled).  
This value may vary following a change in driving  
style or terrain, leading to a significant change in  
current fuel consumption.  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the range  
is recalculated and is displayed if it exceeds 62  
miles (100 km).  
Dashes appearing permanently in place of  
numbers while driving indicates a malfunction.  
Consult a PEUGEOT dealer or a qualified  
workshop.  
With PEUGEOT i-Connect  
Advanced - PEUGEOT  
i-Connect  
It is configured in the Settings >  
Brightness touch screen application.  
► In the "Cockpit" category, press or move the  
slider to the desired setting.  
► Pressing the button located on the end of the  
wiper control stalk displays the following tabs in  
turn:  
– Current information:  
• Driving range (Petrol or Diesel).  
• Current fuel consumption.  
• Stop & Start time counter (Petrol or Diesel).  
– Trips "1" then "2":  
• Average speed.  
• Average fuel consumption.  
• Distance travelled.  
Trip computer  
Displays information related to the current trip  
(range, fuel consumption, average speed, etc.).  
Current consumption  
(mpg or l/100 km or km/l)  
(miles/kWh or kWh/100 km or km/kWh) (Electric)  
Data displayed on the  
instrument panel  
With instrument panels with dials  
Pressing the end of the wiper control stalk  
displays the trip computer data.  
Trip reset  
► When the desired trip is displayed,  
press the button on the end of the wiper  
control stalk for more than 2 seconds.  
Trips "1" and "2" are independent and are used  
in the same way.  
/
Calculated during the last few  
seconds.  
This function is only displayed at speeds above  
19 mph (30 km/h) (Petrol or Diesel).  
With digital instrument panel  
Trip computer data is permanently displayed  
when the "Personal" display mode is selected.  
25  
CarManuals2.com  
Dashboard instruments  
Average consumption  
(mpg or l/100 km or km/l)  
(miles/kWh or kWh/100 km or km/kWh) (Electric)  
– Vehicle functions and equipment setting  
menus.  
With Touch screen 10"  
& Bluetooth Radio &  
Telephone  
– Audio system and telephone controls and  
display of related information.  
– Display of visual manoeuvring aid functions  
(visual parking sensor information, etc.).  
– Internet services and display of related  
information.  
/
Calculated since the last trip  
computer reset.  
Principles  
Average speed  
(mph or km/h)  
Access to the menus  
– Navigation system controls and  
display of related information (depending on  
version).  
Calculated since the last trip computer  
reset.  
Direct access to the Climate menu  
Direct access to the Driving menu  
Distance travelled  
(miles or km)  
For safety reasons, always stop the  
vehicle before performing operations  
that require sustained attention.  
Some functions are not accessible while  
driving.  
► Use the buttons arranged below the touch  
screen to access the menus, then press the  
buttons that appear on the touch screen.  
Some menus may display across two pages:  
press the "OPTIONS" button to access the  
second page.  
Calculated since the last trip computer  
reset.  
Stop & Start time counter  
(minutes/seconds or hours/minutes)  
Recommendations  
This screen uses capacitive sensing technology.  
– Do not use pointed objects on the touch  
screen.  
After a few moments with no action on  
the second page, the first page is  
displayed automatically.  
If your vehicle is fitted with the Stop & Start  
function, a time counter calculates the time spent  
in STOP mode during a journey.  
The time counter is reset each time the ignition is  
switched on.  
– Do not touch the touch screen with wet hands.  
– Use a soft, clean cloth to clean the touch  
screen.  
To deactivate/activate a function, select "OFF"  
or "ON".  
Configuring a function  
Touch screen  
This system gives access to the following  
elements:  
Access to additional information on the  
function  
Confirm  
– Permanent display of the time and outside  
temperature (a blue warning lamp appears if  
there is a risk of ice).  
Return to the previous page or confirm  
– Heating/air conditioning system controls.  
26  
CarManuals2.com  
Dashboard instruments  
Volume adjustment/mute  
Access additional information on the  
function  
Access to function parameters  
With PEUGEOT i-Connect  
Advanced - PEUGEOT  
i-Connect  
1
Menus  
Adding/Removing shortcuts  
Press the touch screen with three fingers  
to show all of the menu buttons.  
Main controls  
Short press, ignition off: system on/off.  
Short press, ignition on: mute/restore  
Access to one of the home pages  
Return to the first home page  
Direct access to the Climate application  
For more information about the menus,  
refer to the sections describing the audio  
and telematics systems.  
sound.  
Long press, ignition on: start standby mode  
(mute sound, screens and clock display off).  
Rotation: volume adjustment.  
Direct access to the Shortcuts for  
driving aids  
Radio/Media  
► Swipe down from the upper edge of the touch  
screen to access a list of quick settings (e.g.  
Brightness, Diagnostics).  
► Depending on the pages displayed on the  
screen, with or without the context menu, scroll  
the text by swiping with your finger, as with a  
smartphone.  
Applications  
Climate  
Press this button to access the  
applications wall.  
To obtain information about the other  
applications not listed here, refer to the sections  
describing the audio and telematic systems.  
ADAS  
Settings for temperature, air flow, etc.  
For more information on Automatic air  
conditioning, refer to the corresponding section.  
Navigation via CarPlay® or Android Auto  
(Depending on equipment)  
Driving  
From any page, press the touch screen  
with three fingers to display the  
applications wall.  
Activation/Deactivation and configuration  
of the driving aid functions.  
Activation, deactivation and settings for  
certain functions.  
The functions are organised in 2 tabs: "Driving  
functions" and "Vehicle settings".  
Telephone  
Climate  
Settings for temperature, air flow, etc.  
For more information on Automatic air  
conditioning, refer to the corresponding section.  
Settings  
Show/Hide context menu  
Return to the previous page  
Applications  
Main settings for the audio system, touch  
screen and digital instrument panel.  
Activation/Deactivation and configuration of  
the exterior lighting, vehicle access and safety  
functions.  
Access to certain configurable equipment.  
► To change the status of a function, press the  
description for the corresponding line (change  
confirmed by the slider moving to the right/left:  
function activated/deactivated).  
27  
CarManuals2.com  
Dashboard instruments  
Energy  
Remotely operable  
additional functions  
(Electric)  
Access to the charging system features  
(energy flow, consumption statistics, deferred  
charging).  
(Depending on country of sale)  
Energy application  
Flow  
– Blue graph: energy consumed directly from  
the traction battery.  
– Green graph: energy regenerated during  
deceleration and braking phases used to  
recharge the traction battery.  
The following functions are  
available from the MYPEUGEOT  
APP application, which is  
The page displays a real-time representation of  
the electric drive train’s operation.  
accessible from a smartphone:  
The average result for the current trip is stated in  
kWh/100 km.  
– Managing the traction battery charging  
(deferred charging).  
– Managing the temperature pre-conditioning.  
– Viewing statistics (depending on availability).  
– Viewing the state of charge and range of the  
vehicle.  
Charging  
This page allows you to programme deferred  
charging.  
For more information on Charging the traction  
battery (Electric), refer to the corresponding  
section.  
1. Active driving mode  
2. Electric motor  
3. Estimated traction battery charge level  
4. Energy flows  
Installation procedure  
► Download the MYPEUGEOT APP application  
from the appropriate online store for your  
smartphone.  
The energy flows have a specific colour for each  
type of driving:  
► Create an account.  
► Enter the vehicle identification number  
(available on the vehicle registration certificate).  
For more information on Identification  
markings, refer to the corresponding section.  
A. Blue: energy consumption  
B. Green: energy recovery  
Statistics  
Network coverage  
In order to be able to use the various  
remotely operable features, ensure that your  
This page shows electrical energy consumption  
statistics.  
28  
CarManuals2.com  

Related Topics

Dashboard instruments

Warning and indicator lamps
Indicators
Manual test
Total distance recorder
Remotely operable additional functions (Electric)