Dashboard instruments
The devices in question are the heating and air
conditioning systems.
This equipment can be used:
– If the vehicle is not plugged in, when the
READY lamp is lit.
– If the vehicle is plugged in, when the ignition is
switched on ("Lounge" mode).
Selecting ECO mode limits the performance of
some of this equipment. The needle or cursor on
the thermal comfort consumption indicator then
moves into the "ECO" zone.
With the ignition on, the total distance is
displayed at all times. It remains displayed for
30 seconds after switching off the ignition. It is
displayed when the driver's door is opened, and
when the vehicle is locked or unlocked.
Manual test
This function allows you to check certain
indicators and display the alerts log.
With Touch screen 10" & Bluetooth Radio
& Telephone
When travelling abroad, you may have to
change the distance units (miles or km):
the displayed speed must be in the local
country’s official unit (mph or km/h).
The unit is changed via the screen's
configuration menu, with the vehicle
stationary.
It can be accessed via the "Check" button
in the Driving touch screen menu.
With PEUGEOT i-Connect Advanced -
PEUGEOT i-Connect
It can be accessed via the Settings>
Vehicle touch screen application.
► Select Safety > Diagnostics.
The following information is displayed on the
instrument panel:
– Tyre pressures.
– Engine oil level (depending on engine).
– Next service due.
To quickly heat or cool the passenger
compartment, feel free to temporarily
select the maximum heating or cooling
setting.
When the heating is on maximum, the gauge
on the thermal comfort consumption indicator
is in the MAX zone. When the air conditioning
is on maximum, it stays in the ECO zone.
Excessive use of thermal comfort equipment,
particularly at low speed, can significantly
decrease the vehicle's range.
Remember to optimise equipment settings
upon achieving the desired level of comfort,
and adjust them if necessary whenever you
start the vehicle.
After an extended period without using the
heating, you may notice a slight odour during
the first few minutes of use.
Lighting dimmer
This system allows the brightness of the
instruments and controls to be adjusted manually
to suit the ambient light level.
– Driving range associated with the AdBlue® and
the SCR system (BlueHDi Diesel).
– Current alerts.
With Touch screen 10"
& Bluetooth Radio &
Telephone
This information is also displayed
automatically every time the ignition is
switched on.
► Press Settings from the status bar or
from the menus buttons.
/
► Select "Brightness" or
"Screen configuration",
Total distance recorder
The total distance recorder measures the total
distance travelled by the vehicle since its initial
registration.
depending on equipment.
► Adjust the instrument panel and
screen brightness by using the arrows or
moving the slider.
24
