Get Driving -> Parking sensors Guide for Peugeot 3008 SUV Third Generation (2024-2025)

Driving

In this case, stop the vehicle and verify if the

front camera is covered by dirt, mud, sand,

snow, ice or anything preventing the sensing.

The system is operational again after the

detection ﬁeld has been cleaned.

If an obstacle is detected as soon as the

reverse gear is engaged, an audible

detection signal is given directly instead of the

audible conﬁrmation signal.

Deactivation / Activation

By default, the function is automatically activated

at every engine start.

With Touch screen 10" & Bluetooth Radio

& Telephone

If no audible signal is given, the display

indication is not shown or a warning message

appears, the system has a failure.

The settings are changed via the Driving

touch screen menu.

Parking sensors

With PEUGEOT i-Connect Advanced -

PEUGEOT i-Connect

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

Audible assistance

The settings are changed via the ADAS

touch screen application.

or

Direct access to the Shortcuts for driving aids.

Deactivation is conﬁrmed by the

illumination of this indicator lamp on the

instrument panel.

The system signals the presence of obstacles

which are both within the sensors’ detection zone

and in the vehicle path deﬁned by the direction of

the steering wheel.

Malfunction

In the event of a malfunction, this warning

lamp lights up on the instrument panel,

accompanied by the display of a message and

an audible signal.

This system detects and signals the proximity of

obstacles (e.g. pedestrian, vehicle, tree, barrier)

using sensors located in the bumper.

Have it checked by a PEUGEOT dealer or a

qualiﬁed workshop.

Rear parking sensors

System startup is available under the following

conditions:

This warning lamp lights up on the

instrument panel with the message

"Driving Assistance Sensor blind: Clean

sensor, see User Manual" if the sensor is

masked.

– when reverse gear is engaged.

– when the vehicle is moving backwards

(e.g. downhill, in neutral).

It is indicated by an audible conﬁrmation signal

and a display indication.

Depending on version, in the example shown,

only the obstacles present in the shaded area

will be signalled by the audible assistance.

The proximity information is given by an

intermittent audible signal, the frequency of

This is a normal behavior, which does not

request the support of a qualiﬁed workshop.

136

CarManuals2.com

Driving

which increases as the vehicle approaches the

obstacle.

When the distance between the vehicle and

the obstacle becomes less than about thirty

centimetres, the audible signal becomes

continuous.

The sound emitted by the speaker (right or

left) indicates the side on which the obstacle is

located.

represents the distance between the obstacle

and the vehicle (white: more distant, orange:

close, red: very close).

When the obstacle is very close, the "Danger"

symbol is displayed on the screen.

Side parking sensors

6

Closing the system display window

Pressing this button closes the

system display window.

The audible signal is automatically suspended

when the vehicle is stationary for a few seconds.

The audible signal is automatically restored

when the vehicle is moving again or if the

obstacle approaches the vehicle.

Using four additional sensors located on the

sides of the bumpers, the system records the

position of obstacles during the manoeuvre and

indicates them when they are located alongside

the vehicle.

This warning lamp ﬂashes during obstacle

detection on the instrument panel.

Muting the audible assistance /

Closing the visual assistance

If the audible detection signal is muted or

the system display window is closed by the

driver during the obstacle detection, only

the warning lamp continues to ﬂash on the

instrument panel.

Adjusting the audible detection signal

Pressing this button opens the

window for adjusting the volume

of the audible signal.

Only ﬁxed obstacles are indicated

correctly. Moving obstacles detected at

the beginning of the manoeuvre may be

indicated mistakenly, while moving obstacles

that appear alongside the vehicle but were

not previously recorded will not be indicated.

Pressing this button mutes/unmutes

the audible signal.

Front parking sensors

Supplementing the rear parking sensors, the

front parking sensors are triggered when an

obstacle is detected in front and the speed of the

vehicle is below 6 mph (10 km/h).

Objects memorised during the

manoeuvre will no longer be stored after

switching oﬀ the ignition.

Visual assistance

Front parking sensor operation is suspended if

the vehicle stops for more than three seconds in

forward gear, if an obstacle is no longer detected

or the vehicle speed exceeds 6 mph (10 km/h).

Deactivation/Activation

(Depending on country of sale)

By default, the audible signal is automatically

activated at each time the reverse gear is

engaged.

The sound emitted by the speaker (front

or rear) locates the obstacle relative to

the vehicle, in front or behind it.

This supplements the audible signal by

displaying bars on the screen whose location

137

CarManuals2.com

Driving

The system cannot be deactivated.

The system is operational again after the

detection ﬁeld has been cleaned.

Operating limits

If the boot is heavily loaded, the vehicle may tilt,

aﬀecting distance measurements.

With Touch screen 10" & Bluetooth Radio

& Telephone

In case of a gearbox failure, the system is not

active, when the reverse gear is engaged.

Visiopark 1 - Visiopark 2

You can start the system manually and

activate/deactivate the audible signal in

the Driving touch screen menu.

With PEUGEOT i-Connect

Advanced - PEUGEOT

i-Connect

Malfunction

In case of display or speakers

malfunction, the system may be

disturbed or unavailable.

With PEUGEOT i-Connect Advanced -

PEUGEOT i-Connect

Visiopark 1

You can start the system manually and

activate/deactivate the audible signal in

the ADAS touch screen application.

In the event of vehicle malfunction, the

system may be deactivated.

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

In the event of a malfunction, this warning

lamp lights up on the instrument panel,

accompanied by the display of a message and

an audible signal (short beep).

Have it checked by a PEUGEOT dealer or a

qualiﬁed workshop.

When reverse gear is engaged, with the engine

running, this system displays views of the

vehicle's close surroundings on the touch screen

using a camera located at the rear of the vehicle.

This warning lamp lights up on the

instrument panel with the message

"Parking Assistance Sensor blind: Clean

sensor, see User Manual" if the sensor is

masked.

This is a normal behavior, which does not

request the support of a qualiﬁed workshop.

In this case, stop the vehicle and verify if the

front and/or rear sensors are covered by dirt,

mud, sand, snow, ice or anything preventing the

sensing.

The rear parking sensors are deactivated

automatically if a trailer or bicycle carrier

is connected to a towing device installed in

accordance with the Manufacturer's

recommendations.

In this case, the outline of a trailer is displayed

at the rear of the image of the vehicle.

When starting the vehicle, the graphic

and audible aids are only available after

the touch screen has started up.

138

CarManuals2.com

Driving

The screen is divided into 3 parts with a side

menu, a contextual view and a view from above

the vehicle in its close surroundings.

The parking sensors supplement the information

in the view from above the vehicle.

Diﬀerent contextual views are available:

– Automatic zoom view.

This view makes it easier to align the vehicle

when parking and to perceive nearby obstacles.

It is automatically deleted if the vehicle remains

stationary for too long.

An additional jet is ﬁtted above the number plate

to clean the reversing camera (depending on

version).

Automatic zoom view

6

– Standard view.

– Panoramic view.

► The washing of the reversing camera is

triggered by operating the rear screenwash.

The rear camera records the vehicle's

Depending on the context, the system chooses

the best view to display (standard or automatic

zoom).

The view type can be changed at any time

during the manoeuvre.

surroundings during the manoeuvre in order to

create a view from above the rear of the vehicle

in its close surroundings, allowing the vehicle to

be manoeuvred around nearby obstacles.

Using the sensors located on the rear bumper,

the automatic zoom view is displayed when

approaching an obstacle at the red line (less

than 30 cm) during the manoeuvre.

Settings

In the side menu:

This window allows to carry out the

following operations:

– adjust the volume of the audible signal.

– trig the camera washing (depending on

equipment).

The system status is not saved when the ignition

is switched oﬀ.

Operating principle

This button allows to mute/unmute the

audible signal.

This view is only available automatically.

Obstacles may appear further away than

they actually are.

Activation/Deactivation

It is important to monitor the sides of the

vehicle during the manoeuvre, using the

mirrors.

Parking sensors also provide additional

information about the area around the vehicle.

To activate the camera, engage reverse gear.

The system is deactivated:

– when changing out of reverse gear.

– by pressing the cross in the top left-hand

corner of the touch screen.

Using the camera, the vehicle's close

surroundings are recorded during low speed

manoeuvres.

An image from above the vehicle in its close

surroundings is created in real time (on the side

of the screen), as the vehicle progresses.

139

CarManuals2.com

Driving

Standard view

This view is only available by selection in the

side menu.

Diﬀerent contextual views are available for the

rear or for the front:

– Automatic zoom view.

Visiopark 2

– Standard view.

– Panoramic view.

Depending on the context, the system chooses

the best view to display (standard or automatic

zoom).

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

The view type can be changed at any time

during the manoeuvre.

The system status is not saved when the ignition

is switched oﬀ.

The area behind the vehicle is displayed on the

screen.

The blue lines 1 represent the width of your

vehicle, with the mirrors unfolded; their direction

changes according to the position of the steering

wheel.

The red line 2 represents a distance of 30 cm

from the rear bumper; the two blue lines 3 and 4

represent 1 m and 2 m, respectively.

This view is available automatically or by

selection in the side menu.

This system allows you to view your vehicle's

close surroundings on the touch screen using

cameras, located at the front and rear of the

vehicle.

Operating principle

Reconstructed view

The cameras are activated and a reconstruction

of a view from above your vehicle in its close

surroundings is displayed on the touch screen.

Live view

Panoramic view

The screen is divided into 4 parts with two side

menus, a contextual view and a view from above

the vehicle in its close surroundings.

The parking sensors supplement the information

in the view from above the vehicle.

The front and rear views automatically appear in

the view from above the vehicle.

It is also possible to display any live view by

selecting the corresponding zone.

The front view can be selected in forward gear

up to 10 mph (16 km/h).

Depending on the view angle chosen in the

left-hand side menu, the system provides

speciﬁc visual assistance in particular driving

conditions, such as entering a blind intersection

or manoeuvring in areas with reduced visibility.

The panoramic view allows you to leave, in

reverse, a parking space by anticipating the

arrival of vehicles, pedestrians or cyclists.

This view is not recommended for carrying out a

complete manoeuvre.

140

CarManuals2.com

Driving

Installing the very cold climate screen

can alter the image transmitted by the

front camera.

– automatically for the front, above

approximately 10 mph (16 km/h).

– by pressing the cross in the top left-hand

corner of the touch screen.

Parking sensors also provide additional

information about the area around the vehicle.

6

Standard view

Settings

In the side menu:

Automatic zoom view

This window allows to carry out the

following operations:

– adjust the volume of the audible signal.

– adjust the brightness.

– adjust the contrast.

– trig the camera washing (depending on

equipment).

Depending on the context, the area behind or in

front of your vehicle is displayed on the screen.

The blue lines (at the rear)/orange lines (at the

front) 1 represent the width of your vehicle, with

the mirrors unfolded; their direction changes

according to the position of the steering wheel.

The red line 2 represents a distance of 30 cm

from the rear or front bumper; the two blue lines

(at the rear)/orange lines (at the front) 3 and 4

represent 1 m and 2 m respectively.

The front or rear camera records the

surroundings during the manoeuvre to create

a front or rear view from above the vehicle in

its close surroundings, making it possible to

manoeuvre the vehicle around the surrounding

obstacles.

Using the sensors located on the front or rear

bumper, the automatic zoom view is displayed

when approaching an obstacle at the red line

(less than 30 cm) during the manoeuvre.

This view is only available automatically.

Depending on version, it can be activated/

deactivated in the ADAS application of the touch

screen.

This button allows to mute/unmute the

audible signal.

Activation/Deactivation

Automatic

With the rear camera, engine running and

vehicle stationary, rear vision is displayed

automatically if reverse gear is engaged.

With the front camera, engine running and speed

below 10 mph (16 km/h), rear vision is displayed

automatically if a gear is engaged.

This view is available automatically or by

selection in the left-hand side menu.

Panoramic view

Manual

► In the ADAS touch screen application,

select Functions>Panoramic Camera

The system is deactivated:

– automatically for the rear, when changing out

of reverse gear.

Obstacles may appear further away than

they actually are.

It is important to monitor the sides of the

vehicle during the manoeuvre, using the

mirrors.

141

CarManuals2.com

Driving

The rear or front panoramic view allows you to

leave a parking space by anticipating the arrival

of vehicles, pedestrians or cyclists.

This view is not recommended for carrying out a

complete manoeuvre.

This view is only available by selection in the left-

hand side menu.

142

CarManuals2.com

Driving -> Parking sensors for Your Peugeot 3008 SUV Third Generation (2024-2025)

Related Topics

Driving